• Journal of the Korea Concrete Institute
• /
• v.14 no.3
• /
• pp.283-290
• /
• 2002

Generally polymer mortar and concrete using unsaturated polyester resin has high strengths and good chemical resistance. However it also has high brittleness and because of this reason, it is not used for the purpose that demands high resistance to impact. The purpose of this study is to improve the brittleness of unsaturated polyester mortar(UPE mortar) which could be used for the flooring material with recycled aggregates and UPE. Polyurethane liquid rubber(PU) and recycled aggregates were used to complement the brittleness and to recycle the resources respectively. The characteristics of mortar were investigated according to the molecular weight and substitution rate of PU. As the molecular weight and PU substitution rate were increased, the viscosity was increased, working life became fast and curing shrinkage was reduced. Compressive and flexural strengths were also reduced but tile brittleness was improved. Therefore, it is seemed that the improved WE mortar could be obtained by using polyurethane liquid rubber with the polyol of molecular weight 2000, 3000.

• Elastomers and Composites
• /
• v.46 no.2
• /
• pp.158-163
• /
• 2011

Rigid polyurethane foam (PUF) was synthesized with different contents of aliphatic polyester polyol, aromatic polyester polyol and aliphatic polyether polyol to know change of properties under sea water. UTM(universal testing machine), DSC(differential scanning calorimetry), hardness meter and FT-IR(Fourier transform spectroscopy) were used to study the PUF`s physical properties under sea water. Compressive strength and hardness of PUF decreased with increasing the content of aromatic polyester polyol under sea water as aging. According to the results of IR spectral analysis, reduction of urethane and urea peak was found and allophanate and biuret peak increased. Although glass transition temperature of PUF increased, mechanical properties of PUF decreased under sea water, because PUF gets brittle when crosslink density increase.

• Journal of the Korean Institute of Gas
• /
• v.12 no.3
• /
• pp.38-42
• /
• 2008

Effect of polyol structure and NCO index on adhesion of PU adhesive at room ($25^{\circ}C$) and extremely low temperature ($-190^{\circ}C$) was investigated. At room temperature adhesive strength of PU adhesive tends to decrease as molecular weight of polyol increases, however, the strength at $-190^{\circ}C$ shows opposite tendency. Adhesive strength of the PU turned out to be directly proportional to the amount of MDI. PU containing aliphatic polyol was higher in shear strength at $-190^{\circ}C$ and the strength of PU with aromatic polyol was higher at room temperature.

• Polymer(Korea)
• /
• v.24 no.1
• /
• pp.72-81
• /
• 2000

Benzoic acid polyester/lactone polyol were synthesized by polycaprolactone 0201 as diol, trimethylolpropane as triol, adipic acid as dibasic acid, and benzoic acid as monobasic acid. Polyisocyanate prepolymer Desmodur N-100 of HDI-biuret type was used in this study. Two-component polyurethane coatings were prepared by blending benzoic acid polyester/polycaprolactone, polyisocyanate, wetting/dispersing agent, white pigment, and flowing agent. Various properties were examined on the film coated with the prepared polyurethane. They showed excellent physical properties such as abrasion resistance, accelerated weathering resistance, and yellowness index. They also showed good physical properties such as flexibility, impact resistance, 60$^{\circ}$ specular gloss, cross hatch adhesion, hydrocarbon resistance, and lightness index difference. Hardness of coating showed a little poor character. The introduction of polycaprolactone 0201 as diol in the polyurethane coatings improved the hydrocarbon resistance, impact resistance, and flexibility of coatings. According to the drying and curing behavior with the contents of benzoic acid, they seem to have reasonable coating properties such as drying time of 2 to 4 hours and pot-life time of 20 to 37 hours.

• Applied Chemistry for Engineering
• /
• v.19 no.4
• /
• pp.388-396
• /
• 2008

2 Components polyurethane coatings are widely used for the industrial coating in general because of its excellent film performance and the workability which were brought by the 3 dimensional cross linked chain structures being formed after the reaction between polyol and polyisocyanate. 2 components polyurethane can be classified into alkyd polyol, polyester polyol, acrylic polyol and polyester modified acrylic polyol depending on where it is used. This research was conducted under the conditions below; different chemical compositions of resin for paint, set the same conditions of viscosity, thinner and acid value, set alternative polyols, OH values and catalysts, set alternative polyisocyanate hardeners of the paint, measure the reaction rates and dynamic mechanical characteristics using RPT-3000, Rotation Rheometer, DMA and FTIR. The research found that the reactivity between polyol and isocyanate influences the film performance and workability depending on the catalysts, OH values and chemical compositions. We find out that different reaction rate of acrylic polyol and polyester modified acrylic polyol with poly-isocyanate is not influenced on temperature and catalyst. In addition, reaction speed of high hydroxyl content polyol is faster than low hydroxyl equivalent. These results can improve difficult working condition to apply urethane coating.

• Applied Chemistry for Engineering
• /
• v.19 no.5
• /
• pp.547-553
• /
• 2008

To achieve the ideal performances of paint film, resins and hardeners have to be chosen and designed in a proper way depending on the exposure circumstance of substrate and the requested physical properties. Six different kinds of clear paints were made in this experiment using alkyd polyol, polyester polyol, polyester modified acrylic polyol and another 3 acrylic polyol resins whose $T_g$ and OH value were partially modified. Then the tests for chemical, physical, and mechanical properties were measured after forming the paint films using aliphatic and aromatic polyisocyanate. The viscosity and elasticity of paint film were then measured in terms of gel point and $tan{\delta}$ using Rheometer and DMA. Through this viscoelastic characteristic test of polyurethane resin, we were able to choose the adequate resins and hardeners which are the most important in the top and primer painting system of urethane paint and, as a result of observing the physical, mechanical, and chemical properties of paint film by urethane, we have finally reached the conclusion that we could apply the proper polyol to top and primer paint for developing the polyurethane paint system.

• Journal of Adhesion and Interface
• /
• v.22 no.2
• /
• pp.39-46
• /
• 2021

Waterborne polyurethanes (WPU) was synthesized using polyester polyol and polycarbonate polyol containing 3-Methyl-1,5-pentanediol (MPD) in a branched structure. To compare physical properties, WPUs were synthesized using polyester polyol obtained from 1,4-butanediol (BD) and adipic acid and polycarbonate polyol obtained from 1,6-hexane diol (HD)/ 1,4-butanediol (BD). This study investigated the effect of polyol molecular structure (molecular structure in soft segments) on the physical properties of WPUs. In the case of WPUs synthesized using polyols containing MPD, 100% modulus and tensile strength were lower than that without MPD, and elongation was higher. The transparency of WPU films with MPD were slightly better than WPU films without MPD.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.30-35
• /
• 2020

In this study, polyurethane-silica composite foams were synthesized to analyze thermal insulation characteristics and mechanical properties. In order to synthesize polyurethane-silica composite foams, polyester-silica composite polyols were first synthesized via a polymerization reaction with silica sol, dicarboxylic acid and glycol in monomer state. Physical properties of polyurethane-silica composite foams synthesized using the composite polyols were analyzed. From the thermal conductivity analysis, no significant differences among HPUF0, HPUF1, HPUF3 and HPUF5 were found. The compressive strength of polyurethane-silica composite foams increased as the silica content increased. The mechanical property of HPUF5 was also about 25% higher than that of HPUF0.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.907-913
• /
• 1997

Alkyd modified polyester was synthesized by the polycondensation of 1,4-butanediol, trimethylolpropane, adipic acid, and the intermediate obtained by the esterification of 3,5,5-trimethylhexanoic acid(THA) and trimethylolpropane, where the contents of THA as a component of alkyd polyol in the intermediate were changed according to 10, 20, and 30wt%, respectively. Two-component polyurethane coatings were prepared by blending the synthesized alkyd modified polyester with Desmodur L-75 as a component of polyisocyanate. Various tests for coating properties with the prepared coatings show that high fineness of grind of $8^-$point, short drying time of 2~3 hours, and long pot-life of 18~23 hours were observed with the content of 3,5,5-trimethylhexanoic acid.

• Polymer(Korea)
• /
• v.25 no.3
• /
• pp.391-398
• /
• 2001

Two-component polyurethane (PU) flame-retardant coatings were prepared by blending tribromo modified polyesters ($TBAO_s$) and isocyanate.$TBAO_s$ were synthesized by condensation polymerization of tribromoacetic acid, a flame-retardant component, with 1,4-butanediol, adipic acid, and trimethylolpropane. The content of tribromoacetic acid was varied by 10, 20, and 30 wt% for the reaction. Various physical properties of these new flame-retardant coatings were comparable to nonflame-retardant coatings. Coatings with 20 wt% tribromoacetic acid did not burn during the vertical burning test.