• Polymer(Korea)
• /
• v.25 no.4
• /
• pp.594-601
• /
• 2001

Direct thermal lamination of polyethylene film on aluminum plate without using adhesive was tried by modifying their surfaces to have polar groups. Polyethylene film was modified by treating with oxygen or acrylic acid plasma. Aluminum plate was modified by treating with boiling water or diaminocyclohexane plasma. Fairly high adhesion strength was obtained even in the case when only the polyethylene film was modified, and adhesion strength was so high that film was broken during the adhesion test if both the film and the aluminum plate were modified. Even chemical bonding seemed to be possible when the film treated with acrylic acid was laminated on the plate treated with diaminocyclohexane plasma by forming amide linkage through the reaction between COOH groups on the film surface and NH$_2$ groups on the plate surface.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.293-301
• /
• 2001

Electrically conductive carbon fiber/high density polyethylene (CF/HDPE) composite films were fabricated by new method, so called electron-ion technology (EIT) and the effects of CF epoxy sizing on the volumetric resistivity. tensile strength and interphase properties of the films were investigated. While epoxy sizing increased conductivity of composite films resulting from enhanced tunneling effect it reduced interphase adhesion between CF and HDPE because polar epoxy sizing and nonpolar HDPE are incompatible. Consequently epoxy sized CF(CF(S)) caused significant reduction in the volumetric resisitivity and tensile strength of composite films when compared with unsized CF(CF(U)). Epoxy sizing reduced nucleating efficiency of CF(S), therefore CF(S)/HDPE composite films showed nonuniform transcrystalline layer when compared with CF(U)/HDPE composite films.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.1
• /
• pp.182-188
• /
• 2008

The compounds of recycled polyethylene(PE) and fly-ashes were prepared. Polymers used were sorted PE from mixed plastics of household waste and Low Density Polyethylene(LDPE) and Linear Low Density Polyethylene(LLDPE) recycled from the scrap of packaging film plants. Fly-ashes were from the power plant and from the household waste incinerator. The tensile strength of recycled LDPE and LLDPE compounds decreased and the flexural modulus increased with greater amount of the power plant fly-ash. Anthracite fly-ash gave rise to slightly higher tensile and flexural strength of the LLDPE mixtures than bituminous coal fly-ash presumably due to higher content of unburned carbon. The incinerator fly-ash introduced to household waste PE enhanced both tensile strength and flexural modulus of the compounds. When LDPE and household waste PE were used together, the synergistic effect of incinerator fly-ash to household waste PE was offset by reduced crystallization of LDPE due to the filler particle. The compounds of household waste PE and incinerator fly-ash might be applied to structural materials for such as sewage pipe, which reduces the waste treatment cost and conserve the environment and resources.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.9-12
• /
• 1998

폴리에스테르계 고분자 중에서 폴리에틸렌테레프탈레이트(PET)는 우수한 기계적, 화학적 성질을 갖고 있어 섬유, 필름 및 산업용 자재로 널리 사용되었으나, 최근 PET보다 더욱 우수한 내열성 및 형태 안정성을 갖는 필름 재질이 요구되고 있다. 페닐기 대신 나프탈렌기가 있는 폴리에틸렌 나프탈레이트(PEN)는 PET의 이러한 점을 보완할 수 있으나 강직한 분자쇄와 높은 결정화도로 인해 가공성이 낮은 단점이 있다[1].

• Resources Recycling
• /
• v.12 no.1
• /
• pp.48-54
• /
• 2003

Odor-removing polyethylene film utilizing waste shell powder (annual production: 250,000 ton) was prepared. Odor removal was designed to work by cation or cationic surfactant adsorbed onto the shell surface by ion-exchange: cationic surfactants (DTAB (n-dodecyltrimethylammonium bromide), CTAB (n-cetyltrimethylammonium bromide) and DHAB (n-dihexade-cyldimethylammonium bromide), and cations $Ce^{3+}$ , $Mg^{2+}$ and $Al^{3+}$) were used. Surface-modified waste shell powder was com-pounded with LDPE to produce 20 wt% shell masterbatch (MB), and the MB was again blended with LDPE to get shell-containing LDPE films with 3,5, 10 wt% of shell (width: 40 cm, thickness: 40 $\mu\textrm{m}$). Mechanical properties of the various shell-LDPE films maintained more than 80 % of that of pure LDPE film. Both shell film modified with cationic surfactant and one without shell surface-modification showed excellent odor-removing ability.

• Journal of Adhesion and Interface
• /
• v.3 no.3
• /
• pp.15-21
• /
• 2002

The modified polyethylene(m-PE) films were prepared from aqueous dispersions which were synthesized by reacting poly(ethylene-co-methylacrylate) with aqueous KOH and ammonia solution to attach -COOK, $CONH_2$, and COOH as pendent groups in the polyethylene backbones. Thermal, tensile and heat-seal properties were measured to investigate the effect of the pendent groups. Endothermic peaks on DSC curves were affected by the thermal history of the samples and a melting peak was observed at around $86^{\circ}C$ on the second heating curve while three melting peaks were shown on the first heating curve. A minimum value of tensile strength was shown at 70 mole% of COOK based on pendent groups. Tensile modulus increased with increasing the amide content in pendent groups. The m-PE films were heat-sealed at lower temperature than LDPE films and showed a minimum heat seal strength at around 70 mole% COOK content in pendent groups.

• Proceedings of the Korean Fiber Society Conference
• /
• 1989.06a
• /
• pp.49-49
• /
• 1989

• The Korean Journal of Rheology
• /
• v.10 no.4
• /
• pp.256-258
• /
• 1998

An experimental study was done to improve the processability and optical property of linear low density polyethylene(LLDPE) film. By modifying the molecular structure of LLDPE with electron beam we could get the improved processability and optical property of film. By appropriate dosing of electron beam and a small addition of UV-stabilizer it was possible to produce gel-free film with low haze. The proceassability was also improved.

• 농업기술회보
• /
• v.49 no.5
• /
• pp.32-33
• /
• 2012

국내 시설원예 재배면적은 1980년대 이후로 급격히 증가했고, 시설채소 재배면적의 99%는 비닐하우스가 차지한다. 이러한 비닐하우스 재배로 채소로 사계절 생산이 가능해졌고, 국민들은 하우스에서 생산된 채소를 어느 때나 구입할 수 있게 되었다. 이러한 시설채소 재배에 피복되는 연질 필름의 소재는 폴리에틸렌(PE) 필름, 에틸렌아세트산비닐(EVA) 필름, 폴리올레핀(PO) 필름 등으로 나누어지고, 이러한 열가성수지에 각종 첨가제를 추가해 보온성, 유적성, 내후성을 향상시킨다. 최근에는 연동하우스와 하우스 피복비용의 증가로 인해 내구성 있는 장기사용 필름에 관한 관심이 높아지고 있다.

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.335-343
• /
• 2002

Blend resin (PET/PETG 70/30 blend) of poly (ethylene terephthalate) (PET) and poly (ethylene terephthalate glycol) (PETG) of weight percent 70/30 was prepared by a twin-screw extruder. Undrawn films of the blend and pure PETG were made by melt-press in hot press. Drawn films were made by capillary rheometer. Crystallinity, shrinkage, thermal, dynamic mechanical, and mechanical properties of these blends and PETG drawn films were investigated by wide angle X-ray diffractometer, dry oven, DSC thermal analyzer, and tensile tester. The crystallinity and density of these films increased with increasing draw ratio and draw rate but decreased with increasing draw temperature. The crystallinity and density of the blend films were higher than those of PETG films. The tensile strength and tensile modulus of these drawn alms increased with increasing draw ratio and draw rate but decreased with increasing draw temperature. The tensile strength and tensile modulus of blend films were higher than those of PETG films. Shrinkage of PETG md blend films decreased with draw ratio and draw rate. Shrinkage of undrawn blend film was 600% higher than that of pure PET film.