• Membrane Journal
• /
• v.8 no.4
• /
• pp.235-242
• /
• 1998

Pervaporation separation of methyl tert-butyl ether (MTBE) and methanol (MeOH) mixture, of which the former compound is well known as the octane booster was carried out. Poly(vinyl alcohol) (PVA) membranes crosslinked with poly(acrylic acid) which have been successfully applied on the water-alcohol mixtures were used in this study. The PVA/PAA ratio in the crosslinked membranes was 95/5, 90/10, 85/15, 80/20, and 75/25 by weight. The operating temperatures were 30, 40, and 50$\circ$C, and the compositions of MTBE and MeOH to be separated were 95/5, 90/10, and 80/20 (MTBE/MeOH) solutions. PVA/PAA=85/15 membrane showed the separation factor $\alpha_{MeOH/MTBE}$=4000 and the permeation rate of 10.1 g/m$^2$hr for MTBE/MeOH=80/20 solution at 50$\circ$. When the same membrane was used, the separation factor and permeation rate for MTBE/MeOH=90/10 solution at 40$\circ$C were $\alpha_{MeOH/MTBE}$=6000 and 8.5 g/m$^2$hr, respectively. Also, the hydrophilic/hydrophobic balance of the membranes would take an important role in the relationships between the membranes and separation performances in terms of the flux and the separation factor.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.10a
• /
• pp.80-81
• /
• 1996

일반적으로 고분자전해질은 고유의 독특한 특성으로 고분자 분리막, 이온교환수지, 의료용고분자등에 널리 응용이 되고 있다. 이러한 고분자전해질은 음이온성과 양이온성이 있으며, 그 이온적성질으로 인하여 반대의 전하를 띄는 고분자전해질들끼리 결합하는 성질을 가지고 있다. 이러한 고분자전해질 착체는 고분자전해질과는 또 다른 고유한 특성을 나타내고 있으며, 특히 고분자분리막과 의료용재료 분야에 응용가능성이 큰 물질이다. 특히 양이온성과 음이온성을 동시에 보유하고 있는 구조적 특성에 의하여 산성과 염기성 모두에서 감응성을 나타낼 수 있다. 일반적으로 고분자 겔의 경우 산성 또는 염기성 영역에서 해리되는 특성에 의하여 pH 감응성을 나타내지만 한쪽 영역에서만 특성을 나타내고 있다. 본 실험에서는 키토산과 폴리아크릴산으로 제조된 고분자전해질착체를 이용하여 pH변화에 따른 함수거동을 관찰함으로써 양쪽의 pH 감응성을 고찰해보고자 하였다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.10a
• /
• pp.131-132
• /
• 1997

1. 서론 : 이온 복합막은 투과증발을 통한 유기수용액의 탈수에 있어서 높은 수투과유량과 선택도를 나타내는 것으로 알려져 있다. 그러나 장시간 운전시에 이온 복합막은 막표면에 있는 금속 counterion이 feed에 씻겨버리기 때문에 분리능의 급격한 감소를 띠게 된다. counterion이 유기물일 경우에는 막속으로 확산되어 우기농축물에 포함될 문제가 있다. counterion이 고분자이면, 막 효능의 안정성이 증가되지만 막 제조과정이 다소 어려워진다. 아크릴산과 스티렐폰산을 포함하고 있는 개질 PAN막을 이용한 피리딘 수용액의 탈수에 관한 이전의 연구에서, 피드내의 피리딘과 막내의 산 기능기 사이에 형성된 in-situ complex가 막의 투과물사이에 특별한 반응이 없거나 막과 주요 투과 물간에 수소결합이 있는 막보다 더 좋은 탈수 효능을 나타냄이 확인되었다. 본 연구에서는 포스페이트를 함유하고 있는 폴리아크릴로니트릴 막의 제조와 피리딘 수용액의 탈수 효능에 대해 언급할 것이다.

• Journal of the Korean Applied Science and Technology
• /
• v.18 no.3
• /
• pp.180-185
• /
• 2001

Antibiotics polymer prepared by chemical bonding and simple blending of antibacterial into polymers have attracted much interest because of their long-lasting and antibacterial activity. Antibiotics polymer can significantly reduce losses associated with dissolution, photolytic decomposition and volatillization. Further more, increased efficiency safety and selectivity are additional benefits which may be realized. In this study, Antibiotics polymer was synthesized by chemical reaction of polyacrylic acid with sulfamethazine by N,N'-dicyclohexylcarbodiimide(DCC) method. Antibacterial susceptibility was determined against Streptococcus pyrogenes[gram(+)] and Esherichia coli.[gram(-)] using a standardized disc test. As a result, the synthetic antibiotics polymer exhibited the broad susceptibilty against Streptococcus pyrogenes and Esherichia coli. Especially, the antibiotic effect of antibacterial polymer against Gram negative(Esherichia coli) was much stronger than that against Gram positive(Streptococcus pyrogenes).

• Polymer(Korea)
• /
• v.32 no.6
• /
• pp.537-543
• /
• 2008

Crosslinked agar-g-poly(acrylic acid) (x-agar-g-PAA) super absorbent with a water absorbency ($Q_{H2O}$) of approximately 660 g/g was synthesized by the copolymerization of agar with an acrylic acid monomer. KPS and MBA were used as the initiator and crosslinker, respectively. Grafting was performed in air. Infrared spectroscopy was used to identify the product of copolymerization. The optimum conditions to synthesize the x-agar-g-PAA superabsorbent were 0.1 g of agar, 0.1 g of the KPS initiator, for 15 min; 50% AA monomer, 0.005 g of the MBA crosslinker, for a propagation time of 5 min; and 1 M NaOH for 15 min to allow for saponification. The reaction temperature was $80{^\circ}C$.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.946-953
• /
• 1996

The effect of absorbed dose, dose rate, cationic salts and solvent on the grafting yield was evaluated when acrylic acid was grafted onto polypropylene fabric by simultaneous irradiation process. Low dose rate when irradiated with the same absorbed dose led to a high grafting yield. On the other hand, the grafting yield increased with dose rate in case the total irradiation times is equal, and the initial rate of grafting was found to be proportional to be 0.74 power of dose rate. $FeSO_4{\cdot}7H_2O$ was found to be the most effective additive for high grafting yield, while inhibiting homopolymer formation. It was impossible to induce radiation grafting without the addition of the certain amount of salt, but the grafting yield decreased with increasing metallic salt.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.1
• /
• pp.300-308
• /
• 2021

In this study, 3D networked poly(sodium acrylate) gel was polymerized and controlled with the crosslinking environment to evaluate the mechanical properties and swelling behavior. In general, as the degree of crosslinking in a pre-gelled solution increases, the swelling ratio of the 3D networked gel decrease while the mechanical strength of the gel increases. Interestingly, this study demonstrates that the polymerization and crosslinking efficiency in gelling process could be depended on the crosslinking environment by evaluating the number of elastically cross-links in 3D networked gel. As a result, the number of elastically corss-links would be changed with 3.6 times as varying of the crosslinking environment while keeping the degree of crosslinking. It is expected that the 3D networked gel would be optimized as an effective absorbing agent for VOCs by using the gel evaluation method based on the number of elastically cross-links.

• Polymer(Korea)
• /
• v.32 no.5
• /
• pp.497-500
• /
• 2008

Polystyrene foam (styrofoam) was treated with low-temperature oxygen plasma by means of immobilization and grafting techniques in order to modify its hydrophobic surface property to hydrophilic one using hydrophilic monomers of acrylic acid and acrylamide, and its surface chemical structure, morphology, and hydrophilicity were examined by ESCA, field emission scanning electron microscope (FESEM), and contactangle meter. The experimental evidences, such as the increases of O/C and N/C ratios in ESCA spectrum, thin film deposition, decrease in contact-angle, strongly suggested that the plasma treatments were useful methods for the preparation of hydrophilic surface. Contact angle diminished drastically from $84^{\circ}$ to $18{\sim}19^{\circ}$. Acrylamide, compared to acrylic acid, appeared to play a decisive role, and to be more powerful agent for improving its surface hydrophilicity.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.527-534
• /
• 2006

The purpose of this study is the development of more effective filter-type polymer adsorbent for removal of anionic pollutants from wastewater. In order to synthesize the polymer adsorbent that possesses anionic exchangeable function, carboxyl(-COOH) group of PP-g-AA nonwoven fabric was converted into amine($-NH_2$) group by the chemical modification using diethylene triamine(DETA). FT-IR data indicate that amine group was introduced into PP-g-AA through amidation of grafted acrylic acid by reaction with DETA. The degree of amination increased with increase in the reaction time and temperature of the chemical modification process, and was significantly improved by the pre-swelling treatment of PP-g-AA with solvent and addition of metal chlorides as a catalyst in following order as $NH_4OH>MeOH{\geq}HCl{\geq}H_2O\;and\;AlCl_3>FeCl_3{\geq}SnCl_2{\gg}ZnCl_2{\geq}FeCl_2$, respectively. However, the addition of catalyst limited the reusability of DETA, hence was less useful from the viewpoint of cost effectiveness and waste management. The anion exchange capacity of the aminated PP-g-AA(PP-g-AA-Am) increased with increase in the degree of amination, but it reached maximum value at the degree of amination as about $50{\sim}60%$. The anion exchange capacity of PP-g-AA-Am was higher than those of commercial anion resins.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.530-537
• /
• 2014

Moisture is a major factor causing the deteriorative physical change, microbial growth, and chemical reaction of the products. In this study, the moisture absorbing composite films have been prepared with moisture absorbing material of polyacrylic acid partial sodium salt (PAPSS) impregnated on LLDPE polymer for the functional packaging applications. The results showed that PAPSS impregnated film illustrated uniformly dispersed PAPSS particles in the LLDPE polymer matrix. The transparency of the PAPSS impregnated film decreased slightly at higher PAPSS concentrations. An increase in the PAPSS content for moisture-absorbing films showed a similar decrease in tensile strength, percent elongation at break, and tear strength. Their values of films impregnated with PAPSS of 0.5, 1, and 2% showed no significant difference. Meanwhile, 4% PAPSS films significantly decreased the values of mechanical properties compared to the films impregnated with different PAPSS levels. Values of the oxygen permeability and water vapor permeability for PAPSS impregnated films decreased significantly with greater PAPSS. The results indicate that 4% PAPSS impregnated in LLDPE films had high affinity of moisture absorbencies compared to the other films. The mathematical equation that best described the moisture sorption isotherm of each film sample was the GAB equation at $25^{\circ}C$. The crystallization and melting temperatures of PAPSS films were influenced by the addition of PAPSS material, but showed good thermal stability.