• Journal of the Korean Applied Science and Technology
• /
• v.19 no.4
• /
• pp.291-296
• /
• 2002

Fatty polyamide that gives softness, lubrication and bulky property and alkyl imidazoline that gives durable softness and antistatic property were synthesized. then, an O/W-type durable softener (DSN) was prepared by the emulsion of the synthesized fatty polyamide and alkyl imidazoline. Emulsion stability of the DSN was good, and the mixed HLB value was 11.2. From the measurement of softness, lubrication, antistatic property, bending resistance, and color fastness, it was proved that the prepared DSN was a good durable softener for nylon.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.563-567
• /
• 1999

Reverse osmosis concentration for cephalosproin C was studied using a polyamide composite membrane, FT-30 in spiral wound type with high solute rejection. The experiments were carried out in the aqueous solution of cephalosporin C for water flux, solute rejection and mass transfer coefficient under applied pressure of $4{\sim}20kg/cm^2$, feed concentration of 100~1000 mg/L and feed velocity of 2.8 and 5.6 L/min at room temperature. The effect of operating pressure on the separation of cephalosporin C showed that permeate flux increased with increasing operation pressure. These results are consistent with those predicted by Kedem-Katchalsky model. Solute rejection was nearly 1. The increase of feed concentration caused the reduction of cephalosporin C rejection, which was higher at low concentration than at high concentration, but degree of reduction was small.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.93-93
• /
• 2011

스포츠웨어 바람막이용도에 사용되는 대부분의 소재는 폴리아미드계 소재이며, 국내에서는 대부분 나일론6 소재를 사용하고 있다. 최근 소비자들의 요구는 점점 경량화되고 있고 야외활동 증가와 더불어 착용감이 우수한 소재를 요구하고 있다. 이러한 시즘에 국내에서 많이 사용되는 나일론6 소재를 이용하여 직물단계에서 경량감과 스트레치성이 발현될수 있는 나일론6 경량 Mechanical 스트레치 직물 개발에 대한 연구를 진행하고자 함이다. 본 연구에서는 직물단계에서 경량감과 스트레치성이 발현될수 있는 나일론6 경량 Mechanical 직물개발을 위해 공중합 나일론6 폴리머와 일반 나일론6 폴리머를 복합방사설비를 이용하여 SIDE BY SIDE POY 26d/6f 원사를 제조한 후, Nip Belt 가연설비로 연신비, 가연 1st 히터온도, 벨트각도 조건에 따라서 제조된 4가지의 나일론6 가연사 DTY 20d/6f와 T사에서 생산되고 있는 나일론6 가연사 DTY 20d/7f를 동일한 직물설계 조건에서 위사방향으로 제직을 실시하였다. 직물설계 조건은 경사를 나일론 DTY 20d/7f, 경사밀도는 2가지, 위사밀도 2가지으로 설계하여 제직하였으며, 이렇게 제조된 직물(생지)를 일반 나일론6 염색가공 공정조건으로 전처리, 염색, 가공, 코팅 공정을 거친후, 신축성 평가를 실시하였다. 동일한 제직조건 및 염색가공 조건에서 제조된 직물의 신축성은 가연조건인 가연 연신비가 높고, 가연 1st 히터온도가 높은 조건에서 높게 나타남을 알 수 있었다. 경사밀도가 낮은 조건이 수축이 많이 진행됨을 알 수 있었으며, 가연조건인 가연 연신비가 높고, 가연 1st 히터온도가 높은 조건에서 수축이 더 많이 이루어짐을 알 수 있었다. 권축률이 높은 가연사 조건이 그만큼 수축이 많이 들어옴을 나타내는 결과로 사료되며, 위사밀도가 낮은 조건이 수축이 좀 더 많이 진행됨을 알 수 있었으며, 위사밀도가 너무 많으면 가연사끼리 상호 수축할 수 있는 정도를 감소시키는 결과로 판단된다. 전처리, 염색가공, 코팅이 완료된 최종 원단의 신축성 평가를 실시한 결과, 비교사로 제직된 최종 원단은 8~10%수준, 가연사 제조조건에 따른 제조된 4가지의 가연사의 신축성은 12~18%의 신축성을 보임을 알수 있었다. 향후, 제직설계 및 염색가공 조건의 다양화로 연구를 진행할 계획이다.

• Korean Journal of Materials Research
• /
• v.6 no.8
• /
• pp.786-795
• /
• 1996

The fiber reinforced thermoplastics(FRTP) were prepared with polypropylene fiber(PP) as matrix and polyvinyl alchol(VF), aramid(KF) or polyamide fiber(PAF) as the reinforcing materials using the integrated fiber mixing apparatus. The reinforced thermoplastic sheets were prepared by com¬pression molding and their morphology, rheological and mechanical properties were characterized. In the morphological properties of composites, the wettability of the reinforced thermoplastics were decreased in proportion to the content of fibers. At low angular frequency, the viscosity of PAF /PP and VF/PP composite was increased with the content of reinforced fiber. However at high frequency the viscosity of composite reinforced with 5~20wt% fiber, was shown the reduced values which approaches that of the neat matrix. The mechanical properties of the composite were changed with the content of reinforecd fiber, and VF/PP and KF/PP composite had better properties than PAF/PP system.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.782-788
• /
• 2018

Submicron copper-silver core-shell (Cu@Ag) particles were synthesized using the sonochemical combined transmetallation reaction and the application to printed electronics as a low cost conductive paste was evaluated. $Cu_2O$ of the $Cu_2O/Cu$ composite used as a core in the reaction for the synthesis of core-shell was sonochemically reduced to Cu, and Cu atoms functioned as a reducer for silver ions in transmetallation to achieve the copper-silver core-shell structure. The characterization of submicron particles by TEM-EDS and TG-DSC confirmed the core-shell structure. Conductive pastes in which 70 wt% Cu@Ag was dispersed in solvents were prepared using a binder and wetting agents, and coated on the polyamide film using a screen-printing method. Printed paste films containing synthesized Cu@Ag particles with 8 at% and 16 at% Ag exhibited low resistivity of 96.2 and $38.4{\mu}{\Omega}cm$ after sintering at $180^{\circ}C$ in air, respectively.

• Korean Chemical Engineering Research
• /
• v.54 no.4
• /
• pp.510-518
• /
• 2016

Ethyl cellulose-g-poly(ethylene glycol) (EP) was synthesized by esterification of carboxylic acid functionalized methoxy polyethylene glycol (MPEG-COOH) with ethyl cellulose (EC) in order to develop a hydrophilic substrate for thin-film composite (TFC) membrane in a forward osmosis (FO) system. A porous EP substrate, fabricated by a non-solvent induced phase separation method, was found to be more hydrophilic than the EC substrate due to the presence of polyethylene glycol (PEG) side chains in the EP. Since the EP substrate exhibits smaller water contact angles and higher porosity, the structural parameter (S) of TFC-EP is smaller than that of TFC-EC, indicating that internal concentration polarization (ICP) within porous substrates can occur less when TFC-EP is used as a membrane. For example, the water flux value of the TFC-EP is 15.7 LMH, whereas the water flux value of the TFC-EC is only 6.6 LMH. Therefore, we strongly believe that the TFC-EP could be a promising candidate with good FO performances.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.6
• /
• pp.95-102
• /
• 2020

The number of use cases in machinery, aviation, and other industries that manufacture precise parts is increasing, and the construction industry is also increasingly using 3D printing technology. Although various materials for 3D printing are currently being developed and utilized, 3D printing manufacturing has a problem that the mechanical properties of the product may change when compared with conventional manufacturing methods such as injection and molding. This paper verifies the effect of the printing orientation on the mechanical properties of the product in the manufacture of PA12 material and providing basic data on the practical use of the materials as building subsidiary materials and structural materials. The results of the experiment showed that the product printed in the orientation of 0° showed the lowest overall strength and elongation rate, and the product printed in the orientation of 45° showed the highest figure. Overall, tensile strength and yield strength increased between 0° and 45°, and tended to decrease somewhat at 45° to 90°.

• Membrane Journal
• /
• v.29 no.6
• /
• pp.348-354
• /
• 2019

Recently, the application range of organic solvent nanofiltration (OSN) technology has been expanding, requiring membranes with better performance. In this work, thin film composite (TFC) OSN membrane was fabricated. First, ultrafiltration support membrane was prepared via nonsolvent-induced phase separation (NIPS) technique using polysulfone (PSf) and polyethersulfone (PES). Then, the effect of pore forming additives such as polyvinylpyrrolidone (PVP) and pluronic F-127 were employed to improve the membrane permeance. The well-known interfacial polymerization technique was employed using MPD-TMC chemistry to form a thin film on top of the fabricated support, and its solvent permeance and nanofiltration performance was characterized. It was found that polyethersulfone support exhibited more reliable performance compared to polysulfone, and PVP additive was more effective compared to Pluronic F-127. As for the oSN performance, polar aprotic solvents like acetonitrile show significantly higher flux (986.5 L·m^-2·h^-1·bar^-1) compared to water and EtOH (9.5 L·m^-2·h^-1·bar^-1).

• Membrane Journal
• /
• v.33 no.6
• /
• pp.427-438
• /
• 2023

In this study, in order to improve the performance of the reverse osmosis membrane with high water flux and high salt rejection, a study was conducted on the evaluation of characteristics according to the curing temperature and time during various additives and interfacial polymerization. The morphology of the membrane with no additives and the membrane with additives both showed a "rigid-and-valley" structure, confirming that the polyamide layer was successfully polymerized on the surface of the porous support layer. In addition, the additive of 2-Ethyl-1,3-hexanediol (EHD) had improved hydrophilicity and water flux, which was confirmed by measuring the contact angle. Finally, a highly permeable TFC membrane with NaCl and MgSO₄ salt rejection of 97.78% and 98.7% and a high water flux of 3.31 L/(m²⋅h⋅bar) was prepared.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.4
• /
• pp.362-371
• /
• 1995

This study describes with the sinking behaviour for the purse seine. The experiment was carried out using three model purse seines of knotless netting. The nettings were woven in same leg length(10.5mm) of polypropylene 170 denier, polyamide 210 denier and polyester 250 denier two thread ply twine, each of the seines were named PP seine, PA seine and PES seine. Dimension of Purse seine models were 420cm for corkline and 85cm for seine depth, each models rigged 65.8g, 50.6g and 35.8g(weight in water) of lead for a leadline, seine models will have the same weight in water. Experiments carried out in the observation channel in a flume tank under still water conditions. Sinking motion was recorded by the one set of TV-camera for VTR, and reading coordinate carried out by the video digitization system. The results obtained were as follows: 1) Netting bundle for PP seine was existence on the surface of the water, spread out a netting by sinking force of sinkers. 2) Netting bundle for PES seine was existence in the middle of corkline and leadline. 3) Average sinking speed of seine margin was fastest for 10.7cm/s of PP seine, followed by 9.7cm/s of PA and 9.2cm/s of PES seines. 4) In all seines, the force of horizontal movement for the seine setting was values of ranged in disregard.