• Journal of the Korean Chemical Society
• /
• v.38 no.12
• /
• pp.885-890
• /
• 1994

Kinetics of electrochemical polymerization of aniline on a tungsten electrode in acidic aqueous solution was studied by means of cyclic voltammetry and kinetic measurements of anodic oxidation. Aniline molecule appeared to be intially oxidized via two-electron transfer to produce oxidized deprotonated aniline ion, which subsequently undergoes nucleophilic attack to the parent aniline and results in head to tail coupling to yield a dimerized species. But, being contrary to the case of Pt electrode, the propagation of polymerization occured through attack of the monomer by the oxidized aniline monomer to polymer. The growth rate of polyaniline was slow in comparison with the growth on Pt electrode. The degradation products were confirmed to be not p-benzoquinone(BQ) but p-phenylenediamine(p-PDA) by spectrophotometry, which agrees with the fact that oxidation of p-PDA was not observed below 1.0 V.

• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.531-535
• /
• 2012

Conductive polyaniline (PANI) nanofibers in UV-curable resin were used for a transparent conductive film. The emeraldine-salt PANI (ES-PANI) nanofibers were prepared by chemical oxidation polymerization of aniline, which could be changed into emeraldine-base PANI by dedoping. EB-PANI nanofibers as a precursor for conductive fillers were thereby transformed into re-dpoed PANI (rES-PANI) by dodecylbenzenesulfonic acid in the UV-curable resin solution. rES-PANI nanofibers have high conductivity and long-term stability in the solution without a defect of nanostructure. The resulting conductive resin solution was proved to be highly stable where no precipitation of rES-PANI fillers was observed over a period of 3 months. The transparent film was spin-casted on a poly(methyl methacrylate) sheet of thickness ca. $5{\mu}m$. A surface resistance of $6.5{\times}10^8{\Omega}/sq$ and transmittance at 550 nm of 91.1% were obtained for the film prepared with a concentration of 1.4 wt% rES-PANI nanofibers in the solution. This transformation process of rES-PANI from ES-PANI by dedoping-redoping can be an alternative method for the preparation of an antistatic protection film with controllable surface resistance and optical transparencies with the PANI concentration in UV-curable solution.

• Textile Coloration and Finishing
• /
• v.8 no.6
• /
• pp.9-26
• /
• 1996

이 연구의 목적은 에틸렌이민 유도체를 갖는 아조계 분산 염료의 나일론 6.6 섬유에의 응용과 최적화된 폴리에스테르 및 나이론 극세사 섬유 염색 조건의 확립이다. 세가지 아지리디닐 모노 아조 염료와 이들 염료의 가수분해 된 형태 그리고 디메틸아닐린계 아조 염료의 폴리에스테르 및 나일론 6.6 극세사 섬유에 대한 염색 및 견뢰도 성질이 조사되었다. 염색 조건 중 pH의 변화에 따른 섬유상의 염착량 변화 조사에서 뚜렷한 경향을 얻을 수 없었으며, 이는 극세사 섬유의 물리적 성질이 두드러지게 착용한 이유라 여겨진다. 염색된 폴리에스테르 극세사 섬유상에서, 아지리디닐 염료는 이들의 가수 분해된 형태 그리고 디메틸아닐린계 아조 염료의 비교하여 개선된 견뢰도 성질을 나타내었다. 아지리디닐 아조 염료의 나일론 극세사 섬유 염색 시 pH 증가에 따라 세탁 및 광견뢰도가 개선되었고, pH8의 염색 조건에서 최적 견뢰도 개선을 나타내었다. 아지리디닐 아조 염료가 이들 염료의 가수분해 된 형태 그리고 디메틸아닐린계 아조 염료와 비교하여 폴리에스테르 및 나일론 섬유상에서 보다 개선된 견뢰도 성질을 나타내었고 이는 섬유와 염료간의 공유 결합으로 기인한 것으로 여겨진다.

• Journal of the Korean Chemical Society
• /
• v.46 no.3
• /
• pp.225-228
• /
• 2002

Poly-o-toluidine (POT) was chemically and electrochemically synthesized for the study of the electronic and steric effect of methyl substituents. It was found that the steric effect was dominant in POT. The IP 4.95 eV, EA 3.24 eV, Eg 1.71 eV of POT were found by the CV (Cyclic Voltammetry) and CCPSA (Constant Current Potentiometric Stripping Analysis).

• Journal of the Korean Chemical Society
• /
• v.46 no.3
• /
• pp.229-232
• /
• 2002

Poly-o-toluidine (POT) was chemically and electrochemically synthesized for the study of electronic and steric effect of methyl substituents. The turn-on voltage of organic light emitting diode (OLED) was 9~14 V. ITO/POT/Al structured OLED were fabricated with various oxidation states of POT. PL, I-V characteristics and EL spectra were investigated.

• Clean Technology
• /
• v.19 no.2
• /
• pp.105-112
• /
• 2013

In this study, polyaniline (PANI)-based $TiO_2$ (PANI-$TiO_2$) composites calcined at different temperatures were prepared and their applications for control of trichloroethylene (TCE) and tetrachloroethylene (TTCE) at indoor air levels were investigated. For these target compounds, the photocatalytic control efficiencies of PANI-$TiO_2$ composites did not exhibit any trend with varying calcination temperatures (CTs). Rather, the average control efficiencies of PANI-$TiO_2$ composites over 3-h photocatalytic process increased from 61 to 72% and from 21 to 39% for TCE and TTCE, respectively, as the CT increased from 350 to $450^{\circ}C$. However, for both the target compounds, the average control efficiencies of PANI-$TiO_2$ composites decreased gradually as the CT increased further to 550 and $650^{\circ}C$. These results were ascribed to contents of anatase crystal phase and specific surface area of different particle sizes in the PANI-$TiO_2$ composites, which were demonstrated by the X-ray diffraction and scanning electron microscopy images, respectively. At the lowest input concentration (IC, 0.1 ppm), average control efficiencies of TCE and TTCE were 72 and 39%, respectively, whereas at the highest IC (1.0 ppm) they were 52 and 18%, respectively. As stream flow rate increased from 0.1 to 1.0 L $min^{-1}$, the average control efficiencies of TCE and TTCE decreased from ca. 100 to 47% and ca. 100 to 18%, respectively. In addition, the average control efficiencies of TCE and TTCE decreased from ca. 100 to 23% and ca. 100 to 8%, respectively as the relative humidity increased from 20 to 95%. Overall, these findings indicated that as-prepared PANI-$TiO_2$ composites could be used efficiently for control of chlorinated compounds at indoor air levels;if operational conditions were optimized.

• 한국전기화학회:학술대회논문집
• /
• 2002.10a
• /
• pp.24-24
• /
• 2002

• 한국전기화학회:학술대회논문집
• /
• 2000.04a
• /
• pp.44-44
• /
• 2000

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.10b
• /
• pp.31-32
• /
• 1999

• 한국전기화학회:학술대회논문집
• /
• 2003.10a
• /
• pp.33-33
• /
• 2003