Proceedings of the Korean Institute of Surface Engineering Conference
/
2017.05a
/
pp.87.2-87.2
/
2017
폴리머 필름에 표면처리 및 코팅, 필름의 다층화, 원료 소재의 하이브리드화 등을 통해서 기능성을 부여한 기능성 고분자 필름은 디스플레이, 반도체, 자동차, 에너지, 포장재 등 다양한 분야에 응용되고 있다. 기능성 고분자 필름의 산업화를 위해 대면적 연속 공정기술 개발이 필요하며, 본 연구에서는 roll to roll 시스템을 이용하여 폴리머 기판상 나노 구조 형성을 위한 공정연구를 수행하였다. 재료연구소 자체 개발 선형이온소스는 0.25 keV에서 1 keV까지 에너지 조절이 용이하며, 이온빔 조사를 통해서 PET, PMMA, PDMS 등 다양한 폴리머 기판의 표면에 나노 구조화 공정을 개발하였다. 표면 나노 구조 형성을 통해서 폴리머 필름의 투과도와 Haze 제어가 가능하며, 공정 기술을 통해 저반사 및 고굴절 특성의 기능성 필름을 제작하였다. 이러한 나노 구조화 필름은 플렉서블 디스플레이의 광추출효율 향상을 위한 광추출층, 저반사 디스플레이 패널 필름 등에 적용 가능한 기술이다.
The objective of this study is to find the relationship between the tensile strength of the polymer film and the bond strength and tensile strength of the polymer-modified mortar using styrene (St) and butyl acrylate (BA), and porosity. In the test results, the bond strength and tensile strength of the polymer-modified mortar increased with increases in the tensile strength of polymer film and the fine pore volume.
Proceedings of the Materials Research Society of Korea Conference
/
2011.05a
/
pp.63.1-63.1
/
2011
현재 상용 중인 터치패널의 전도성 필름으로는 ITO가 주로 사용된다. 하지만, 디스플레이 기기의 수요 증가와 Indium의 고갈로 인한 ITO의 수요 공급 불균형으로 인한 원가 문제가 대두되고 있다. 이 때문에, Carbon nanotube (CNT), Graphene 등의 대체 투명 전도성 물질들이 연구 중에 있지만 투과율 및 저항 문제 등이 문제가 되고 있다. 본 연구에서는 투명 전도성 필름의 광 투과도 향상을 위하여, 자외선 경화 레진을 이용하여, 전도성 필름 상에 모스 아이 레진 패턴을 형성하는 실험을 진행하였다. 패턴이 형성된 이후에는 Scanning Electro Microscope를 통하여 패턴의 형성 유무를 관찰하였고, UV-vis와 4-point probe를 이용하여 투과도 및 저항을 측정하였다. 실험 결과 모스아이패턴을 필름에 패터닝 함으로써, 전체적으로 투과도가 증가된다는 것을 확인 할 수 있었으며, 투과도의 증가폭은 단면 패터닝보다는 양면 패터닝을 한 경우가 높았다. 그리고 저항 변화에 있어서는 패턴이 있는 부분의 경우 표면 잔여층으로 인하여 급격하게 증가하였지만, 전도면 반대편에 패터닝을 진행한 경우 거의 변화하지 않았다는 것을 확인할 수 있었다. 결과적으로, 본 연구를 통해 나노 임프린트 리소그래피를 통해 전도성 폴리머 필름 상부에 모스아이나노 구조물을 제작하였고, 이를 통해 기존의 전도성 폴리머 필름의 낮은 투과율을 향상시킬 수 있었다.
Polycarbonate (PC) films have been irradiated with various kinds of ions according to energy and dose. Change of the optical transmittance and chemical characteristics were confirmed by UV-VIS and FTIR (ATR) spectroscopy respectively. These UV-A block in 400 nm was variable from 10 to 100% according to energy and doses. Surface electrical resistance of PC film irradiated by ion beam was $10^6-10^{13}{\Omega}/cm^2$, which reveal variation of conduction. Contact angle of film irradiated by ion beam was decreased than the pristine film. Polymer surface morphology was examined by means of atomic force microscopy (AFM). As expected, degradation of polymer film was higher after irradiation with heavier Xe ions but the roughness in the polymer surface morphology were more pronounced for Ar ions. This observed effect can be explained by stronger compaction of polymer surface layer in the case of Xe irradiation, connected with a reduction of free volume available.
The purpose of this study is to make clear the durability of the polymer films formed in the autoclaved polymer-modified mortars and concretes. The polymer films prepared with polymer dispersions such as a styrene-butadiene rubber (SBR) latex, a poly (ethylene-vinyl acetate)(EVA) emulsion and a polyacrylic ester (PAE) emulsion for polymeric admixtures are exposed to autoclaving at 18$0^{\circ}C$ in temperature and 1.01 MPa in vapor pressure, and subjected to tensile test and infrared spectroscopy. The durability of the polymer films is evaluated from the application of autoclaving to the polymer films under saturated Ca(OH)$_2$ solution immersion causes no degradation for SBR films and a significant degradation due to the saponification of the polymers for EVA and PAE films. Accordingly, in the application of autoclaving to polymer-modified mortars and concretes, it is suggested that SBR-modified mortars and concretes are hardly degraded but EVA- and PAE-modified mortars and concretes are markedly degraded by the saponification of the polymers.
Proceedings of the Optical Society of Korea Conference
/
2003.07a
/
pp.172-173
/
2003
아조색소를 함유하는 폴리머필름은 Photonics분야에서 그 응용가능성 때문에 집중적인 연구의 대상이 되었다. 부피폴리머필름에서의 아조벤젠유도체의 trans-cis isomerization은 편광홀로그램, optical channel waveguide, reversable optical memory에서 이용되었다. 특히 최근에는 DRl/PMMA의 비공명영역에서 부피홀로그램에서 고회절효율과 Degenerate Four Wave Mixing에서 높은 반사율을 얻어내는 보고가 있었다. (중략)
We proposed an in situ measurement set-up and technique to measure the various electro-optic(E-O) properties of the E-O polymer. Using the proposed measurement set-up, the electro-optic effect and birefringence of unpoled side-chain E-O polymer induced by the strong dc and ac electric field were observed. The dependence of the E-O coefficients on the various poling conditions were measured with real time. To evaluate the thermal stability of the poled polymer the relaxation of the E-O effect was measured and the result was compared with well known polymer materials. The proposed measurement reduces the number of experimental steps and saves measurement time.
The growth of Polypyrrole film has been investigated during electropolymerization in an aqueous solution on bare and SAM modified gold electrodes by in-situ EQCM and ex-situ AFM. According to the result of cyclic voltammetry measurements, in the case of a bare gold electrode, the electrochemical deposition of polypyrrole were dependent on the limiting oxidative potential, but not on scan numbers. When the limiting potential higher than 0.8 V was applied on the electrode, the amount of polypyrrole deposited on a gold electrode was rapidly increased and the abnormal mass change attributed to the rearrangement of polypyrrole films was observed as the scan number increased. The polypyrrole film Prepared on electrodes modified with 1-dodecanethiol SAM or thiophene SAM grew 3-dimensionally with the rearrangement of film. However, in the case of BPUS SAM, 2-dimensional layer-by-layer growth of film was observed without the rearrangement of film. AFM images showed films with chain-shaped and/ or donut-shaped polymers when grown rapidly and a wrinkled film at the steady state condition.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2017.05a
/
pp.121-121
/
2017
본 연구는 비전도성 폴리머 표면을 개질하여 감광성 금속을 유전체 표면에 흡착시키고, 감광성 금속의 광화학 반응을 이용하여 귀금속 촉매를 비전도성 폴리머 표면에 선택적으로 흡착시켜 무전해 Cu 도금을 수행하여 금속패턴을 형성하였다. 기능성 유연 필름은 일반적으로 투명한 플라스틱 고분자 기판을 기반으로 전기 전자, 에너지, 자동차, 포장, 의료 등 다양한 분야에서 폭넓게 활용 되고 있으며, 본 연구에서는 습식 도금 공정을 이용하여 폴리이미드 필름상에 $10{\mu}m$ 이하의 미세패턴을 형성하기 위한 공정을 개발하고자 하였다. 비전도성 폴리머 표면에 무전해 도금을 위해서 우선 폴리머 필름의 표면을 개질하는 공정이 필요하다. 이에 KOH 또는 NaOH 알카리 용액을 이용하여 표면을 개질하였으며 개질된 표면에 감광성 금속이온의 흡착시키기 위한 감광성 금속이온은 주석을 사용하였으며, 주석 용액의 안정성 및 퍼짐성 향상을 위해 감광성 금속 용액의 제조 및 특성을 관찰하였으며, 감광성 금속화합물이 흡착된 비전도성 유전체 표면을 포토마스크를 이용하여 특정 부위, 즉 표면에 금속패턴 층을 형성하고자 하는 곳은 포토마스크를 이용하여 광원을 차단하고 그 외 부분은 주 파장이 365nm와 405nm 광원을 조사하여 선택적으로 감광성 금속화합물의 산화반응을 유도하는 광조사 공정을 수행하였다. 광원이 조사되지 않은 부분에 귀금속 등의 촉매 입자를 치환 흡착시켜 금속 패턴이 형성될 수 있는 표면을 형성하였다. 위의 활성화 공정이후에 활성화 처리된 표면을 세척하는 수세 공정을 거친 후 무전해 도금공정에 바로 적용할 경우 미세한 귀금속 입자가 패턴이 아닌 부분 즉 자외선(UV) 조사된 부분에도 남아있어 도금시 번짐 현상이 발생한다. 이에 본 연구에서는 활성화 처리 후 약 알칼리 용액에 카르복실산을 혼합하여 잔존하는 귀금속 입자를 제거한 후 무전해 Cu 도금액을 이용하여 $10{\mu}m$ 이하의 Cu 금속 패턴을 형성하였다.
나가세산업(주)은 염료 화학품 합성수지 등의 원재료를 취급하는 기존 비니지스에 머물지 않고 고객들과 보다 더 많은 시너지효과 및 부가가치를 창조하고자 폴리머 필터 DENA FILTER를 개발했다. 본 고에서는 이중 폴리머 필터인 DENA FILTER에 대해서 소개하고자 한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.