• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.5
• /
• pp.57-63
• /
• 2010

Tolerance analysis is one of the most important processes to improve the image quality of products. High resolution camera module for mobile phones needs precision assembly technology since the module becomes smaller and thinner. This paper will focus on the unit tolerance and the assembly tolerance which can affect the performance of the module. Lens shading and relative illumination were used to evaluate the optical axis scatter for each component on camera and estimate the assembly yield rate based on the evaluation result. A program was developed to analyze the impact on optical axis by each module, then to optimize the dimensions and tolerance for reducing the scatter of optical axis assembly. Through the simulation, though a rate of relative illumination was declined in where optical axis is displaced $100{\mu}m$ from sensor center, MTF performance is not influenced by increasing in optical axis displacement. It was seen that assembly yield was improved in result of simulation after correcting optical axis tolerance.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.3
• /
• pp.124-131
• /
• 2007

Aspheric glass lenses was fabricated by glass molding press(GMP), which is a plano-aspheric convox shape and intended for use as an optical design of 3 megapixel and 2.5 magnifications zoom in a camera phone module. Transcription ratio of form accuracy (PV) as well as resolution properties was measured for evaluation the molded lens. Form accuracy (PV) of the mold surface was $0.127\;{\mu}m$ in an aspheric and $0.168\;{\mu}m$ in a plano, in case of the molded lens it shows $0.205\;{\mu}m$ and $0.223\;{\mu}m$, respectively. Resolution of the molded lens was measured as a MTF[Contrast]. The molded lens shows contrast of 32.9% at 80 1p/mm and the value is similar with contrast of 33% obtained simulation.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.3078-3080
• /
• 2005

본 논문에서는 AF 기능을 구현함에 있어서 2 백만 화소 카메라 모듈인 Sharp LZ0P3731의 기능, AF 모터 (VCM, Voice Coil Motor)에 작용하는 힘과 구동원리, 이를 구동하기 위한 H/W의 설계 특성, 및 DM270을 이용한 AF 제어 시 Focus Value의 특성 분석을 바탕으로 Focus Value 특성을 고려한 최적 AF 알고리즘을 개발하였다. 본 논문에서 제안한 최적 AF 알고리즘은 '최대의 Focus Value가 각 State의 Step Value 마다 각각 다른 위치에서 검출'되는 AF 모터 및 구동 H/W특성을 고려하여, 최적 AF 기능은 최대의 AF Value에 근접하는 Lens Position 제어가 가능하도록 하였다. 이를 검증하기 위한 윈도우용 S/W로 성능을 확인한 결과, 일반적인 AF 기능은 58 프레임으로 3.87초의 시간이 소요되는 반면, 제안한 AF 기능은 25 프레임으로 1.67초로 2배 이상의 빠른 AF 성능을 가졌다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.612-615
• /
• 2012

시각장애인이 단순히 눈을 가리는 용도로 쓰이는 안경에 장애물 감지를 위한 초음파 센서와 바라보는 시선의 영상을 담기 위한 카메라모듈, 기울기와 방향을 감시하기 위한 9축센서를 탑재시켜 전자 안경을 만들고, 전자안경에서 수집된 데이터를 처리하기 위해 스마트폰과 연동하여 영상처리 기술을 접목시켜 보이지 않는 시각을 청각으로 대체해주는 장치이다. 또한 보호자에게 웹을 통해서 실시간으로 시각장애인 위치정보를 구글맵 지도에 표시하여 알려준다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.2 s.308
• /
• pp.48-56
• /
• 2006

This paper introduces design and implementation of digital photo kiosk system, digital photo printing system, with auto color correction module that considers gamut between touch screen and output device, digital photo printer, to provide user-preferred media. This module performs media correction function to service high quality contents for image captured by digital camera and mobile phone camera. Since it is implemented as LUT for real-time processing, the system offers one-touch interface to user. As a result of implementation, this kiosk system provides user-favorite photo because of black and white mode, sepia mode, and brightness and contrast adjustment. Also it can gives smooth tone transition and photos of similar color to captured image due to auto color correction module.

• Journal of Internet Computing and Services
• /
• v.18 no.1
• /
• pp.21-26
• /
• 2017

In this paper, an USB-OTG (Uiversal Serial Bus On-the-go) interface module was designed with the iris information for personal identification. The image recognition algorithm which was searching face and iris areas, was proposed with pixel differences from eye blinking after several facial images were captured and then detected without any activities like as pressing the button of smart phone. The region of pupil and iris could be fast involved with the proper iris area segmentation from the pixel value calculation of frame difference among the images which were detected with two adjacent open-eye and close-eye pictures. This proposed iris recognition could be fast processed with the proper grid size of the eye region, and designed with the frame difference between the adjacent images from the USB-OTG interface with this camera module with the restrict of searching area in face and iris location. As a result, the detection time of iris location can be reduced, and this module can be expected with eliminating the standby time of eye-open.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1379-1386
• /
• 2023

In this paper, research was conducted to prevent various safety accidents that may occur from infant carriages carrying children and to make the use of infant carriages easier. In order to prevent the baby car from running without protection, a brake function is installed on the baby car wheels using a pressure sensor and a servo motor. Then, a pressure sensor and LCD are used to determine whether the seat belt is fastened to prevent the child from falling out of the baby car. In addition, it was designed to use LCD and LED to turn on a warning light when the temperature and humidity exceed a certain level, so that infants can be in a comfortable environment when using the baby car.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.747-750
• /
• 2008

JPEG(Joint Photographic Expert Group)은 손실 압축 기법을 사용하여 데이터 양을 20:1 이상으로 현저히 줄이면서도 원 영상과 거의 유사한 영상을 복원할 수 있도록 해주기 때문에, 요즘 디지털 카메라 및 휴대폰 등 영상을 저장할 매 대부분 Exif(Exchangeable image file format)로 JPEG 압축형식을 널리 사용하고 있다. 본 논문은 JPEG 베이스라인 모드로 압축되어진 영상의 디코딩 단계에서 필요한 비계층형 헤더를 파싱하는 모듈의 기능을 소프트웨어로 모델링하고 VHDL을 이용하여 회로를 합성하고 동작을 검증하였다. 설계 결과 Xilinx xc3s1000 fg676-4 환경에서 154.488MHz의 동작속도를 나타내었고, JPEG 디코더의 고속 데이터 처리에 적응 가능하다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.654-657
• /
• 2005

위치기반 서비스는 다양한 응용 분야를 가지고 있다. 특히 GPS 모듈을 이용한 단말기 기반 방식은 위치 정보를 손쉽게 획득할 수 있기 때문에 많은 연구가 진행되고 있다. 차량용 네이게이션이나 휴대폰 등에서 이를 이용한 제품들이 많이 출시되고 있다. 하지만 위치기반서비스를 영상처리에 적용한 것은 거의 찾아보기 어렵다. 본 논문에서는 GPS 모듈을 이용하여 GGA 문장을 획득고, 이를 임베디드 시스템에 적용하여 정지영상을 만들때 위치정보를 함께 표시하였다. 이를 이용하여 디지털 카메라나 개인용 단말기에 GPS 수신기를 추가하면 정지영상을 얻을 때 언제, 어디 라는 정보가 사진과 함께 표시되어 유용하게 사용될 수 있다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1153-1164
• /
• 2012

In this paper, we propose an efficient car management system based on object-oriented modeling using car number recognition and smart phone. The proposed system perceives car number of repair vehicle after recognizing the licence plate using an IP camera in real time. And then, existing repair history information of the recognized car is be displayed in DID. In addition, maintenance process is shooting video while auto maintenance mechanic repairs car through IP-camera. That will be provide customer car identification and repairs history management function by sending key frames extracted from recorded video automatically. We provide user graphic interface based on web and mobile for your convenience. The module design of the proposed system apply software design modeling based on granular object-oriented considering reuse and extensibility after implementation. Car repairs center and maintenance companies can improve business efficiency, as well as the requested vehicle repair can increase customer confidence.