• Journal of the Korea Concrete Institute
• /
• v.25 no.1
• /
• pp.107-114
• /
• 2013

In this study we experimentally evaluated an impact resistant performance of fiber reinforced concrete in the moment of explosion by high-velocity projectile with emulsion explosive. To assess the impact resistance, we conducted the impact test of high-velocity projectile which reaches an impact speed of 350 m/s and the experiment of contact exploding emulsion explosive. As a result, bending and tensile performance depending on type of PVA, PE fiber (polyvinyl alcohol fiber, polyethylene fiber) and steel fiber affects destruction of rear side in the form of spalling. Destroying the backside of the concrete compressive strength compared to suppress the bending and tensile performance is affected. In addition, the experiment shows that the destruction patterns of concrete specimen producted by high velocity impact and contact explosion are significantly similar. Therefore, it is possible to predict the destruction patterns of specimens in the situation of contact explosion by high-velocity projectile.

• Analytical Science and Technology
• /
• v.30 no.6
• /
• pp.405-410
• /
• 2017

High energetic materials (HEMs) have been used in fuels, civil engineering and architecture as well as military purposes such as explosives and propellants. The essential process for the development of new energetic compounds is to accurately calculate its detonation performances. The most typical equation for calculating the explosive performance is the Kamlet-Jacobs (K-J) equation. In the K-J equation, the parameter such as the number of moles of gaseous products at the explosion, the average molar mass of gas products, and the explosion heat greatly affect the explosion performance. These depend on the product composition for the detonation reaction. In this study, detonation products of 65 high energetic molecules (HEMs) were calculated from the various rules such as Kamlet-Jacobs, Kistiakowsky-Wilson, modified Kistiakowsky-Wilson, Springall-Roberts rules to calculate more accurate detonation velocity (Dv). In addition, they were applied to five kinds of detonation velocity equations proposed by K-J, Rothstein, Xiong, Stine and Keshavarz. The mean absolute error and root mean square error of HEMs were obtained from experimental and calculated velocity value for each method. The K-J and Xiong equation that is slightly complex showed a lower mean absolute error than the simple Rothstein and Keshavarz equation. When the mod-KW rule was applied to the Xiong equation, the detonation velocities were the most accurate. This study compared the various method of calculating the detonation velocity of HEMs to obtain accurate HEMs performance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.3
• /
• pp.369-380
• /
• 2019

When a extreme loading such as blast is applied to prestressed concrete (PSC) structures and infrastructures for an instantaneous time, serious property damages and human casualties occur. However, a existing design procedure for PSC structures such as prestressed containment vessel (PCCV) and gas storage tank do not consider a protective design for extreme internal blast scenario. Particularly, an internal blast is much more dangerous than that of external blast. Therefore, verification of the internal blast loading is required. In this paper, the internal blast resistance capacity of PSC member is evaluated by performing internal blast tests on RC and bi-directional PSC scaled down specimens. The applied internal blast loads were 22.68, 27.22, and 31.75 kg (50, 60, and 70 lbs) ANFO explosive charge at 1,000 mm standoff distance. The data acquisitions include blast pressure, deflection, strain, crack patterns, and prestressing force. The test results showed that it is possible to predict the damage area to the structure when internal blast loading occurs in PCCV structures.

• Journal of the KSME
• /
• v.50 no.4
• /
• pp.46-49
• /
• 2010

수리동역학 코드를 사용하여 폭발성형 관통자의 생성과정을 해석하고 다양한 해석기법을 개발하였다. 수치해석 결과 섬광 X선 장비를 사용한 정치시험 결과와 비교하여 해석 결과의 신뢰성을 확인하였다. 폭발성형 관통자의 관통성능 증대를 위하여 다양한 라이너 모델에 대한 수치해석을 수행하고, 그 결과를 비교하였다.

• Explosives and Blasting
• /
• v.41 no.3
• /
• pp.1-12
• /
• 2023

A basic assessment of techniques to mitigate the risk of blast shock waves from proximity explosions was conducted. Common existing techniques include using mitigant materials to form barriers around the explosive or in the direction of propagation of the shock wave. Various explosive energy dissipation mechanisms have been proposed, and research on blast shock wave mitigation utilizing impedance differences has drawn considerable interest. In this study, shear thickening fluid (STF) was applied as a blast mitigation material to evaluate the effectiveness of STF mitigation material on explosion shock wave mitigation through explosion experiments and numerical analysis. As a result, the effectiveness of the STF mitigant material in reducing the explosion shock pressure was verified.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.7
• /
• pp.565-572
• /
• 2021

In this study, a study on the performance and aging of explosive bolts stored for a long time among pyrotechnic mechanical devices(PMD) used as separation devices in the defense field is conducted. For this, explosive bolts that had been installed in the weapon system for about 10 years are secured. Performance and life extension test procedures are established based on the AIAA Standard and MIL-STD. Before performance evaluation, non-functional tests are performed to check whether external changes or failures occurred. Next, circuit inspection and X-ray tests are conducted to check the failure in internal circuits and structures. After that, performance test is carried out to confirm the operation of the samples that passed the non-functional test. Through this test, separation of bolt and separation time are measured, and some samples are tested after a high temperature storage test to confirm the remaining life and the possibility of extension. Finally, the remaining life and reliability are predicted based on the results of the test and the Arrhenius model to identify remaining shelf life and reliability depend on time.

• 전기의세계
• /
• v.42 no.2
• /
• pp.48-59
• /
• 1993

산업현장의 안전을 이룩하는데 화재 및 폭발 사고의 방지는 매우 중요하다. 또한 우리 제품의 수출활성화를 위해서도 국제적으로 표준화되고 인정받는 방폭전기기기의 규격 및 성능보장이 필수적인 요건으로 대두되고 있다. 이를 위해 정부차원에서도 본격적으로 법규를 개정하고 관련규격을 제정하는 등의 제도적 뒷받침을 시작하였으며, 그 일환으로서 폭발위험지역에서의 방폭형 전기기기의 사용을 의무화하고 이들 기기의 성능검정을 실시하게 되었다. 그러나 우리나라의 전기기기 방폭기술은 아직 초기단계에 있는 만큼 관련업체, 성능 검정기관 및 정부기관의 적극적인 설비투자와 학계 및 연구기관 등의 적극적이고 지속적인 연구개발을 통하여 이를 본격적인 궤도에 올려 놓아야 할 것이다. 최근 매스콤의 잦은 보도를 통하여 알 수 있듯이 재산에 막대한 손실을 가져오므로 철저한 사전 대비에 의하여 예방토록 하여야 할 것이다. 이를 위해 위험지역에서 사용하는 전기기기의 방폭화는 필수적이다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.4
• /
• pp.269-275
• /
• 2020

An explosive bolt is one of many representative pyrotechnic release devices that separates two joined structures using explosives inside the bolt. In this study, a 1/2 inch ridge-cut explosive bolt with an EBW detonator was developed for usage in sled tests. The initial shape design was carried out based on the design method, and the performance test showed that the separation performance was outstanding but fragments occurred. Therefore, numerical analysis was performed to reduce the amount of debris by minimizing the amount of explosives. From the numerical analysis, the separation mechanism and characteristics of the ridge-cut explosive bolts were identified, and the minimum amount of explosives that does not generate debris was proposed. Verification tests revealed that the ridge-cut explosive bolts with the proposed explosive weight minimized fragments while maintaining the separation performance.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1033-1036
• /
• 2008

In this paper, the analysis of impact damage behavior of a reinforced concrete structure that undergoes both a shock impulsive loading and an impact loading due to the air blast induced from an explosion is performed. Firstly, a pair of multiple loadings are selected from the scenario that an imaginary explosion accident is assumed. The RC structures strengthened with glass fiber reinforced polymer (GFRP) composites are considered as a scheme for retrofitting RC wall structures subjected to multiple explosive loadings and then the evaluation of the resistant performance against them is presented in comparison with the result of the evaluation of a RC structure without a retrofit. Also, in order to derive the result of the analysis similar to that of real explosion experiments, which require the vast investment and expense for facilities, the constitutive equation and the equation of state (EOS) which can describe the real impact and shock phenomena accurately are included with them. In addition, the numerical simulations of two concrete structures are achieved using AUTODYN-3D, an explicit analysis program, in order to prove the retrofit performance of a GFRP-strengthened RC wall structure.

• Journal of the Korean Chemical Society
• /
• v.60 no.1
• /
• pp.9-15
• /
• 2016

The theoretical investigation has been performed to predict detonation velocity, detonation pressure, and thermodynamic stability of HMX/LLM-116 cocrystal. All possible geometries of HMX, LLM-116, and cocrystal have been optimized at the B3LYP/cc-pVTZ level of theory. The binding energy for the trigger bond and cluster has been calculated to predict the thermodynamic stability. The MP2 binding energies were obtained using single point energy calculation at the B3LYP optimized geometries, and the density has been calculated from monte carlo integration. The detonation velocity and detonation pressure have been calculated using Kamlet-Jacobs equation, while enthalpy has been predicted at the CBS-Q level of theory.