• Defense and Technology
• /
• no.2 s.168
• /
• pp.46-53
• /
• 1993

첨단과학 기술을 이용한 무기체계의 개발추세에서도 박격포가 다른 무기체계로 대체되지 않고 각광을 받고 있는 이유는, 야포와 비교해 볼때 구조의 단순성, 고사각 사격기능, 살상효과 우수 기동성 우수, 높은 발사속도 등의 장점을 가지고, 야포와 더불어 화력지원용으로 최일선에서 긴요하게 사용되기 때문이다

• Journal of the Korea Society for Simulation
• /
• v.29 no.3
• /
• pp.1-8
• /
• 2020

When enemy drones infiltrate large urban areas, various forms of great republics are deployed in large areas to respond. Due to the characteristics of a large number of government-run aircraft, the residual coal, other than the hit bullet, falls into various sizes of debris after its own explosion. The damage rate was analyzed by dividing the debris into anti-aircraft guns and guided weapons by deriving four factors: critical speed, fragmentation mass, initial speed of debris, and object collision speed, which can cause damage to human life as the debris falls to the ground. In the future, the North is expected to infiltrate the capital city of Seoul by operating unmanned aerial vehicles, which are asymmetric forces, and the damage could be minimized by setting up pre-fatal and fire-restricted zones to minimize casualties between responses.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.7-14
• /
• 2005

This paper describes development of automatic flight control system for an unmanned target drone. Current target drone is operated by pilot control of on-board servo motor via remote control system. Automatic flight control system for the target drone greatly reduces work load of ground pilot and can increase application area of the drone. Most UAVs being operated nowdays use high-priced sensors as AHRS and IMU to measure the attitude, but those are costly. This paper introduces the development of low-cost automatic flight control system with low-cost sensors. The integrated automatic flight control system has been developed. The performance of automatic flight control system is verified by flight test.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.3
• /
• pp.98-109
• /
• 2006

Fire control system(FCS) errors can be classified as hardware errors, filter prediction errors, effective ballistic function errors, and aiming errors. Among these errors, the filter prediction errors are the most significant error sources. To reduce them, a target future position calculation method using the acceleration estimate is suggested and it is compared with the constant velocity target prediction method. Simulation results show that the suggested method has better performance than the constant velocity prediction method. Target tracking algorithm is established with multiple target tracking filters based on IMM structure.

• Journal of the Korea Society for Simulation
• /
• v.24 no.4
• /
• pp.35-41
• /
• 2015

Recoil system for 40mm automatic gun is a device developed to absorb the shock of explosion. It is impossible to conduct pinpoint strike due to recoil if very high explosive shock, which is generated when an automatic gun fires shells, can't be absorbed. This study covers development and verification of analysis model for recoil system by utilizing a multi-domain software. The research process is as in the following. First, an analysis model is developed to verify damping characteristics through understanding of design intention. Second, environment which is identical to a field test is set up on analysis tool after putting explosive force that is measured through the test into the analysis model. Finally, the analysis model for recoil system using the multi-domain software is verified if it has effectiveness with a comparison between internal pressure of the recoil system along with displacement of gun barrel and the field test result.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.115-122
• /
• 2020

This study aimed to improve the reliability of the assurance pressure of a gun barrel due to the difference between the US Standard and Korean Standard. In addition, the reliability was found to differ according to the maximum pressure of the Ammunition, so restrictions are expected. During the development of the new bullet, the maximum pressure of the bullet was approximately 3,000 psi higher than the assurance pressure of the gun barrel. To solve this problem, the reliability of the cannon was analyzed when the assurance pressure of the gun barrel increased. First of all, the technical data from overseas were reviewed to check for cases of increased assurance pressure, and tests were performed to determine if it could withstand high pressure through a verification firing test. Finally, the simulation analyzed the stability of the recoil buffer. The study found no abnormal results in all items, suggesting that an increase in the assurance pressure for a gun barrel was possible. This study is expected to be used as basic data for future reliability studies of similar equipment.

• Defense and Technology
• /
• no.5 s.267
• /
• pp.34-41
• /
• 2001

자동장전장치를 적용하면서 얻게 되는 중요한 장점은 발사속도의 향상이다. 전차에서의 발사속도는 중구경화기나 자주포와 같은 최대발사성능보다는 초탄에 의한 표적파괴 실패시 후속탄의 신속한 재사격 능력이라는 관점이 더 중요하며, 자동장전장치는 이러한 측면에서 수동장전보다 장전속도를 증대시킬 수 있고 특히 기동간에도 정지시와 동일한 후속탄 장전성능을 보장해 줄 수 있다는 점에서 수동장전에 비해 커다란 전력증강 효과를 가져올 수 있다.

• Defense and Technology
• /
• no.4 s.266
• /
• pp.34-43
• /
• 2001

자동장전장치를 적용하면서 얻게 되는 중요한 장점은 발사속도의 향상이다. 전차에서의 발사속도는 중구경화기나 자주포와 같은 최대발사성능보다는 초탄에 의한 표적파괴 실패시 후속탄의 신속한 재사격 능력이라는 관점이 더 중요하며, 자동장전장치는 이러한 측면에서 수동장전보다 장전속도를 증대시킬 수 있고 특히 기동간에도 정지시와 동일한 후속탄 장전성능을 보장해 줄 수 있다는 점에서 수동장전에 비해 커다란 전력증강 효과를 가져올 수 있다.

• Defense and Technology
• /
• no.3 s.121
• /
• pp.44-51
• /
• 1989

소련이 운용하는 전차 모델은 아직까지 중동지역국가의 중요한 장비인 T-55 및 T-62와 반고정(Semi-fixed)탄을 사격하는 125미리 활강포를 장착한 T-64와 T-72, 그리고 새로운 T-80등 5가지이다. 전차전에서 이스라엘군의 경험이 인간공학적 측면등 소련 전차설계의 결점을 확인시켜 주었지만, 원칙적으로 소련 전차는 전투지향적이고 야전조건에 생존력이 있는 우수한 장비이다. 만약 고도로 훈련된 승무원에 의해서 운용된다면 가장 위험하고 치명적인 상대가 될수 있는 것이다

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.2
• /
• pp.229-236
• /
• 2016

For this research, the trajectory of a projectile was simulated via the multibody dynamics analysis of a self-propelled mortar. The dynamic model was composed of a mortar model and a vehicle model, and was simulated using the RecurDyn program. Interior ballistic was applied to the mortar model, and exterior ballistic was conducted by Matlab using the simulation results of the interior trajectory. Through repetitive Monte-Carlo simulations, the accuracy of the mortar was analyzed by considering variations in the aiming angle and vehicle dynamic response.