• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.2
• /
• pp.119-126
• /
• 1999

Current transformer (CT) saturation may cause a variety of protective relays to malfunction. The conventional CT is designed that it can carry up to 20 times the rated current without exceeding 10% ratio error. However, the possibility of CT saturation still remains if the fault current contains substantial amounts of ac and/or dc components. This paper presents a design method of iron-cored CTs for use with protective relays to prevent CT saturation. The proposed design method determines the core cross section of the CT; it employs the transient dimensioning factor to consider relay's operating time (duty cycle) and dc component as well as ac components contained in the fault current, and symmetrical short-circuit current factor to consider as well as ac components contained in the fault current, and symmetrical short-circuit current factor to consider the biggest fault current. The method designs the cross section of CTs in cases of reclosure and no reclosure.

• Tunnel and Underground Space
• /
• v.26 no.3
• /
• pp.212-219
• /
• 2016

The sprayable waterproofing membrane is installed between shotcrete to provide crack bridging and hence prevent flow of liquid water as a waterproofing system. Because of its material characteristics, the sprayable membrane can be constructed at more complex structure than sheet membrane. The main component of the sprayable waterproofing membrane is a polymer-based material, therefore, moisture can migrate through sprayable waterproofing membrane materials by capillary and vapor diffusion mechanisms. The moisture transport mechanisms can have an influence on the degree of saturation and may influence the pore pressure and risk of freeze-thaw damage on concrete linings and membrane. In this study, long-term hygrothermal behavior was simulated with considering moisture transport and long-term effects on saturation of tunnel linings. From the simulation, due to water absorption and vapor transport properties of sprayable membrane, change of relative humidity and water content in tunnel lining can be evaluated.

• Journal of Advanced Navigation Technology
• /
• v.25 no.3
• /
• pp.203-210
• /
• 2021

In many metropolitan cities around the world, ground and underground transportation networks are saturated due to urbanization. In addition, regulations on carbon emissions to prevent global warming are becoming stricter, and eVTOL, which will be operating in complex cities, is gaining popularity as the next generation of eco-friendly transportation. In this study, the hover lift efficiency and disc loading of eVTOLs for each type were calculated by classifying eVTOLs into following types: multicopter, lift+cruise, and vectored thrust. In addition, using the aerodynamic analysis programs OpenVSP, Fluent and Javaprop, the specific battery energy required for the smooth operation of eVTOL, which will be realized in the near future, was calculated and analyzed base on reports published by Uber and airworthiness authorities of each country.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.12a
• /
• pp.68-68
• /
• 2020

최근 기후온난화 및 다문화 가정 증가에 따라 아열대작물 재배 및 수요가 증가하고 있다. 차요테(Sechium edule (Jacq.) Sw.)는 멕시코 남부와 중앙아메리카가 원산인 아열대 채소로 박과에 속하는 다년생 덩굴식물이다. 차요테는 아삭아삭한 식감에 가벼운 단맛을 가지고 있으며, 그 맛이 오이, 무와 비슷하다. 라틴아메리카에서는 튀김, 샐러드, 수플레로 필리핀에서는 수프과 볶음의 재료로 활용한다. 국내에서는 식감이 좋아 열매를 장아찌 용으로 이용하거나 어린순과 잎을 무침용으로 이용하기도 한다. 차요테는 매우 낮은 칼로리를 지녔으며 포화지방이나 콜레스테롤을 함유하지 않아 다이어트 식품으로 알맞은 채소이다. 또한 비타민 C와 E, K가 풍부하여 피로 해소, 면역력 개선, 피부 미용, 감기 예방, 골다공증이나 암 예방, 동맥경화 방지는 물론 신경전달물질인 세로토닌과 멜라토닌 형성에도 도움을 준다. 그밖에 칼륨, 마그네슘, 망간, 구리, 아연 등의 미네랄이 함유되어 있어 세포의 성장과 분열, 면역체계의 활성화, 심장과 근육 기능 유지 등에 기본적인 도움을 준다. 따라서, 본 연구는 차요테의 가공식품 소재화를 위해 부위별 유용성분 함량 분석을 통한 차요테 이용 확대를 위해 수행하였다. 차요테는 잎에서 열매와 어린순에 비해 지방, 단백질, 탄수화물, 식이섬유 등이 높게 나타났으며, 비타민 C, E 및 칼슘과 철분도 높은 함량을 나타내었다. 또한 장에 존재하여 다당류를 단당류로 분해하는 효소인 Alpha-Glucosidase의 활성을 억제하여 탄수화물 흡수를 지연시켜 체내 혈당을 낮추는 효과를 나타내는 AGI 활성은 열매 부위에 가장 높게 나타났다.

• Journal of Chest Surgery
• /
• v.29 no.4
• /
• pp.373-380
• /
• 1996

Prevention of thromboembolism is the most important task in the development of bioconpatible small caliber artificial vascular graft. In normal vessels, vascular endothelial cells maintain homeosatsis by secreting numerous factors. The aim of this study is to develope a method which Improves biocompatibility of small caliver polyurethane graft using endothelial cell culture technique, and ev luate the efTectiveness of extracelluar matrix for endothelization which was produced by cultured fibroblast. Methods ; Multiporous polyurethane tube of 3 mm diameter, 0.3 mm thickness was manufactured for vascular graft. Three mongrel dogs were intubated and internal jugular veins removed. Extracelluar matrix produced by cultured flbrobast which was obtained from dog's internal jugular vein were coated to the polyurethane graft. Then, endothelial cells extracted from Jugular vein were cultured and fixed on the extracelluar matrix layer of vascular graft. Endothelial cell coated vascular grafts were implanted to the carotid arteries of experimental dogs as interposed autograft. Implanted grafts were removed after 3 and 6 weeks. As a control, PTFE graft was interposed on carotid artery. These experiments demonstrated that extracelluar matrix produced by fibroblast can afford a base for endothelial cell linings of polyurethane graft. Although thrombosis were developed on autografted en othelial cell coated graft, 33% opening was noticed, and showed less adhesion to adjacent tissue layer. These findings suggest that fiboblast produced extracelluar matrix which can be used for edothelial cell lining vascular graft, and by improving the cultured endothelial cell function, there will be a new modality for reducing thrombosis on small vascular graft.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.181-194
• /
• 2013

Landslides are known as gravitational mass movements that can carry the flow materials ranging in size from clay to boulders. The various types of landslides are differentiated by rate and depositional features. Indeed, flow characteristics are observed from very slow-moving landslides (e.g., mud slide and mud flow) to very fast-moving landslides (e.g., debris avalanches and debris flows). From a geomechanical point of view, shear-rate-dependent shear strength should be examined in landslides. This paper presents the design of advanced ring-shear apparatus to measure the undrained shear strength of debris flow materials in Korea. As updated from conventional ring-shear apparatus, this apparatus can evaluate the shear strength under different conditions of saturation, drainage and consolidation. We also briefly discussed on the ring shear apparatus for enforcing sealing and rotation control. For the materials with sands and gravels, an undrained ring-shear test was carried out simulating the undrained loading process that takes place in the pre-existing slip surface. We have observed typical evolution of shear strength that found in the literature. This paper presents the research background and expected results from the ring-shear apparatus. At high shear speed, a temporary liquefaction and grain-crushing occurred in the sliding zone may take an important role in the long-runout landslide motion. Strength in rheology can be also determined in post-failure dynamics using ring-shear apparatus and be utilized in debris flow mobility.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.12
• /
• pp.109-115
• /
• 2014

The purpose of this study is to estimate the sediment volume concentration of the liquified-solid mixture which is included fine sediment fractions, according to the variance of the channel slope and the water supply. The numerical model was performed by using the Finite Differential Element Method (FDM) based on the equation for the mass conservation, momentum conservation and the equation of coarse sediment an fine sediment. In comparison of varying the channel slope, the deeper the channel slope, the inflection point of the sediment concentration was occurred rapidly. In comparison of variance of the water supply, as the water supply increases fluctuation with high sediment concentration. In this situation, debris flow changes to the turbulent flow and the sediment becomes to be floated. In comparison varying the length paved saturated sediment, the longer the length, the high concentration of sediment occurred, for the safety of the slope it is needed to check the possibility of the erosion in the slope by debris flow. The results of this study will provide useful information in predicting of the disaster by the liquified-solid mixture and in prevention of the debris flow with various the slope in the mountain side.

• Fire Science and Engineering
• /
• v.27 no.1
• /
• pp.39-45
• /
• 2013

This study analyzes the explosion hazard of dry cleaning solvent recovery machine in laundry shop in two aspects, i.e. combustible and ignition source, and determines the explosive conditions of this machine by conducting mockup explosion tests repeatedly, varying conditions and using real dry cleaning solvent recovery machines. As to combustibles, two kinds of combustibles used widely in Korea have been selected and tested. The flash points, LEL's, and saturation vapor pressures of those combustibles have been measured, and their explosion specific curves have been drawn, based on the results of the measurements, so that the explosion risks of those materials may be determined, depending on the temperatures. Potential voltages generated from materials for laundry and foreign materials of metals have been assumed to be the ignition sources in this application, and their potential voltages have been measured, depending on temperature, humidity, and antistatic agent, by using real materials for laundry and a potential voltage measuring device. Tests have been conducted, varying the quantities, concentrations, and operating temperatures of materials for laundry. As a result, explosions have not been generated with potential voltages of materials for laundry, but explosions have been observed when applying artificial spark energy of 2.0 mJ.

• Journal of Korea Water Resources Association
• /
• v.39 no.6 s.167
• /
• pp.479-486
• /
• 2006

In this study, 2-D seepage analysis is conducted for the evaluation of Box-Culvert installation, Cut-off Wall Length, permeability reduction of soil under the Box-Culvert effects on Levee Box-Culvert safety. The result of analysis it is obtained that the safety of seepage and slope stability of levee is declined by the installation of Box-Culver. And also obtained that the piping from poor compaction and cavity around Box-Culvert Is Prevented by the Cut-off wall installation below breast wall and levee toe, so it is recommended that the Cut-off Wall below breast wall and levee toe must be installed. And the Cut-off Wall installed below levee center is considered when the safety of piping is declined for the whole levee section. On the other hand, for the realistic analysis it is recommended that the 3-D seepage analysis is more suitable for the safety evaluation of Box-Culvert installed levee when it is considered that the saturated field is dispersed to the ground.

• Nuclear Engineering and Technology
• /
• v.8 no.2
• /
• pp.89-99
• /
• 1976

The grafting of acrylic acid in aqueous solution to polyvinyl chloride fibers tab been studied in the presence of ferrous, ferric, and cupric salts, The mutual irradiation technique was adopted using a Co-60 source or a Van do Graaff accelerator. The grafting and homopolymerization were suppressed by the cations. Particularly the grafting was suppressed by the cations in the following order of effectiveness : $Cu^{2+}$>$Fe^{2+}$>$Cu^{3+}$. The rate of grafting (in %/hr) was proportional to the 0.76th power of the dose rate over the range from 8.5f $10^3$ rad/hr to $1.4\times10^5$ rad/dr. The apparent activation energy for the grafting was determined to be 6.1 Kcal/mole between $25^{\circ}$ and $75^{\circ}C$ for the mixture of AA-HaO-$(CH_2Cl)_2$, containing Mohr's salt, $4\times10^{-3}$ mole/l. The increase of the grafting was observed when total dose and dose intensity were raised, or when ethylene dichloride as a swelling agent was saturated in the monomer mixture. The grafted polyvinyl chloride fibers showed considerable improvement in moisture regain, heat shrinkage, and melting properties, but tensile properties were not significantly affected by grafting.