• Title/Summary/Keyword: 포함편향

Search Result 99, Processing Time 0.023 seconds

Assessment of Relative Accuracy for Inaccessible Area Imagery Using Biased Ground Control Points (편향된 지상기준점을 이용한 비접근지역 영상좌표의 상대정확도 향상연구)

  • 권현우;조성준;임삼성
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.20 no.2
    • /
    • pp.165-170
    • /
    • 2002
  • For the inaccessible area where the field verification is unable, it is difficult to obtain the ground control points (GCPs) or the acquired GCPs may be inaccurate. In general systematic geometric correction is achieved by utilizing orbit ephemeris and three axis attitude data of the satellite. however, this method results to poor accuracy of the imagery's absolute coordinates. To improve the absolute accuracy as well as the relative accuracy, we added the accessible region into the inaccessible area. We obtained GCPs in the accessible region by the fast static GPS survey and made geometric corrections with these biased GCPs. Because the biased GCPs show a pattern of coordinate errors, we analyzed this tendency to track the estimated errors in the inaccessible area.

Advancement in Design Criteria of Helical Pile (헬리컬 파일 설계식 고도화 연구)

  • Park, Jong-Bae;Park, Yong-Boo;Kwon, Young-Hwan
    • Land and Housing Review
    • /
    • v.12 no.3
    • /
    • pp.87-96
    • /
    • 2021
  • Korea has begun to use the Helical pile prevalent in Europe. Korea hasn't still set up the standard design criteria on Helical pile due to the lack of relevant researches. In this regard, this study carried out static and dynamic load tests on Helical pile and then performed reliability analysis including the previous research data. The results present that Road bridge design standard design criteia for pre-boring pile with regard to Modified Davisson method showed good reliability and consistency because Resistance bias factor of this design criteria approached '1.0' and Design C.O.V. showed 'low' level.

Numerical Model Study for Structure and Distribution of the Keum River Plume (금강 풀룸의 구조와 분포에 대한 수치모델 연구)

  • 신은주;이상호;최현용
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.7 no.3
    • /
    • pp.157-170
    • /
    • 2002
  • To examine the structure and distribution of the Keum River plume produced by continuous river discharge we carried out three-dimensional numerical model experiments with or without Coriolis force and tide. When Coriolis force is included but tide is not the model plume forms the clockwise circulation north of southern channel in the developing stage. As the plume expansion progresses the center of circulation moves to the southwest, with fuming the discharging axis of low-salinity water to the southwest from the mouth of southern channel. These results are explained mainly in terms of barotropic geostrophy by surface slope maintained with accumulated low-salinity(buoyant) water in front of the estuary mouth due to of offshore strong salinity front. When the M$_2$ tide is included the model plume extends farther to the northwest, forming large tongue-like salinity distribution. The tidally averaged surface flows of the offshore plume are mainly in geostrophic balance. These changes in plume distribution are explained in terms of low-salinity water advection by tidal excursion and active tidal mixing; the former supplies low salinity water to the north off the estuary mouth and the later increases mean sea level along the plume and surface salinity in northern shallow coastal area. The main features of observed Keum River plume(Lee et al., 1999; Choi et al., 1999), which showed the northwestward deflection of the plume axis and northward deepening of the plume thickness from the estuary mouth region, are well reproduced by the model in which tide is included.

The neural mechanism of distributed and focused attention and their relation to statistical representation of visual displays (분산주의와 초점주의의 신경기제 및 시각 통계표상과의 관계)

  • Chong, Sang-Chul;Joo, Sung-Jun
    • Korean Journal of Cognitive Science
    • /
    • v.18 no.4
    • /
    • pp.399-415
    • /
    • 2007
  • Many objects are always present in a visual scene. Since the visual system has limited capacity to process multiple stimuli at a time, how to cope with this informational overload is one of the important problems to solve in visual perception. This study investigated the suppressive interactions among multiple stimuli when attention was directed to either one of the stimuli or all of them. The results indicate that suppressive interactions among multiple circles were reduced in V4 when subjects paid attention to one of the four locations, as compared to the unattended condition. However, suppressive interactions were not reduced when they paid attention to all four items as a set, in order to compute their mean size. These results suggest that whereas focused attention serves to later out irrelevant information, distributed attention provides an average representation of multiple stimuli.

  • PDF

Multidimensional Ring-Delta Network: A High-Performance Fault-Tolerant Switching Networks (다차원 링-델타 망: 고성능 고장감내 스위칭 망)

  • Park, Jae-Hyun
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.35 no.1B
    • /
    • pp.1-7
    • /
    • 2010
  • In this paper, a high-performance fault-tolerant switching network using a deflection self-routing was proposed. From an abstract algebraic analysis of the topological properties of the Delta network, which is a baseline switching network, we derive the Multidimensional Ring-Delta network: a multipath switching network using a deflection self-routing algorithm. All of the links including already existing links of the Delta network are used to provide the alternate paths detouring faulty/congested links. We ran a simulation analysis under the traffic loads having the non-uniform address distributions that are usual in Internet. The throughput of $1024\;{\times}\;1024$ switching network proposed is better than that of the 2D ring-Banyan network by 13.3 %, when the input traffic load is 1.0 and the hot ratio is 0.9. The reliability of $64\;{\times}\;64$ switching network proposed is better than that of the 2D ring-Banyan network by 46.6%.

Analysis for Flood Quantile Estimates at Ungauged Sites in Arid and Semi-arid Regions Based on Regional Frequency Analysis (지역빈도해석을 통한 건조지역의 미계측 지점 확률홍수량 추정을 위한 연구)

  • Jung, Kichul;Kang, Boosik
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.51-51
    • /
    • 2017
  • 지역빈도해석은 짧은 기간의 자료를 보유하고 있는 계측 지점이나 자료가 없는 미계측 지점에서의 확률수문량을 산정하기 위하여 많이 쓰여 진다. 지역빈도해석을 실시하기 위한 조건으로는 우선 수집된 하천유역들을 대상으로 수문학적 동질 지역을 구분하는 것이 중요하다. 그리고 구분되어진 지역에 포함되는 모든 지점들의 자료를 빈도해석 함으로써 관심 지점의 신뢰할 만한 확률수문량을 산정하는 것이다. 그동안의 지역빈도해석은 주로 비건조지역을 중심으로 홍수와 같은 재난재해 대비 그리고 수자원 관리를 위한 연구들을 실시해왔다. 본 연구의 주 목적은 건조지역의 수자원 관리를 위해 건조지역 하천유역을 중심으로 지역빈도해석을 실시하여 신뢰할만한 확률수문량을 산정하는 것이다. 확률수문량 산정값의 정확도를 향상시키기 위해 지역빈도해석 모델에 쓰여 지는 새로운 지형학적 변수들을 제공하였고 수문학적 동질 지역을 구분 위해 수집된 각 하천유역의 형상들을 확인하여 동질 지역을 정의하였다. 예를 들면, 수지형 유역, 부채형 유역, 격자형 유역과 같은 다른 형상들을 구분하여 각 유역 형상 종류별로 동질 지역을 만들었다. 건조지역의 지역빈도해석을 위해 미국 건조지역의 105개 하천유역 유량자료들을 수집 및 이용하였다. 확률수문량 산정을 위하여 앙상블 인경신경망 (Ensemble Artificial Neural Network)과 정준 상관 계수(Canonical Correlation Analysis)를 이용한 지역빈도해석 모델을 만들었다. 제안된 모델의 수행평가와 정확성 평가를 위해 리샘플링 기법인 10-겹 교차 검증 (10-fold cross-validation), 잭나이프 (Jackknife) 기법들을 이용하였고 모델로부터 산정된 확률수문량값을 편향 (Bias), 상대 편향(rBias), 평균 제곱근 오차 (RMSE), 상대 평균 제곱근 오차 (rRMSE)를 통하여 산정 값과 실제 관측 값의 차이를 분석하였다. 그 결과 건조지역의 지역빈도해석을 위해 새롭게 제시된 지형학적 변수들을 사용하였을 때 모델의 수행능력이 향상되었음을 확인하였다. 또한 하천유역 형상에 따라 동질 지역을 구분하였을 때 향상된 확률수문량이 산정되었다. 향상된 지역빈도해석 모델을 통해 건조지역의 신뢰할만한 확률수문량을 산정함으로써 건조지역의 효과적인 수자원 관리를 위한 수공시설물 설계에 중요한 정보들을 제공할 것이다.

  • PDF

A Study of the Thrust Vectoring Control Using Secondary Co- and Counter-Streams (2차 순유동과 역유동을 이용한 추력벡터 제어법에 관한 연구)

  • Lim Chae-Min;Kim Heuy-Dong
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2004.10a
    • /
    • pp.109-112
    • /
    • 2004
  • Of late, the thrust vectoring control, using fluidic co-flow and counter-flow concepts, has been received much attention since it not only improves the maneuverability of propulsive engine but also reduces an additional material load due to the trailing control wings, which in turn reduce the aerodynamic drag. However, the control effects are not understood well since the flow field involves very complicated non: physics such as shock wave/boundary layer interaction, separation and significant unsteadiness. Existing data are not enough to achieve the effectiveness and usefulness of the thrust vectoring control, and systematic work is required for the purpose of practical applications In the present study, computational study has been performed to investigate the effects of the thrust vector control using the fluidic co-and counter-flow concepts. The results obtained show that, for a given pressure ratio, the thrust deflection angle has a maximum value at a certain suction flow rate, which is at less than $5\%$ of the mass flow rate of the primary jet. With a longer collar, the same vector angle is achievable with smaller mass flow rate.

  • PDF

An Investigation of the Relationship Between Corporate Logo and ESG Evaluation (기업로고와 ESG 평가의 관계에 대한 고찰)

  • Yujin Lee;Daeil Nam
    • Asia-Pacific Journal of Business Venturing and Entrepreneurship
    • /
    • v.19 no.2
    • /
    • pp.125-139
    • /
    • 2024
  • The corporate logo symbolizes the company's value, goals and vision as a visual symbol representing the company. It serves as a communication tool for companies by conveying different messages depending on design and color. As demands for ESG management have recently increased, companies have begun to implicitly demonstrate values such as environmental protection and corporate transparency through logos. Companies use logos as a strategy to visually emphasize the value they pursue and project the desired image as a signal. In this process, stakeholders who see the logo experience cognitive bias. Therefore, this study seeks to find out that ESG value can be indirectly communicated by the design of corporate logos, which can also affect a company's ESG evaluation. In addition, this study will examine the moderate effect that logos expect to encounter a greater bias effect as the companies actively include ESG-related issues in corporate disclosure data. This study conducted an analysis of 617 KOSPI-listed companies using ESG evaluation data from 2020 to 2022. The analysis confirmed the significant relation of the type of logo and ESG disclosure on ESG evaluation but found partially moderate effect of ESG disclosure.

  • PDF

Precise Impact Angle Control Using Analytic Solution of Biased Proportional Navigation with Single Dynamic Lag (동적지연을 포함하는 편향 비례항법 유도루프의 해석 해를 이용한 정밀 충돌각 제어)

  • Moon, Han-Bit;Ra, Won-Sang;Whang, Ick-Ho;Kim, Yong-Jung
    • Proceedings of the KIEE Conference
    • /
    • 2011.07a
    • /
    • pp.1736-1737
    • /
    • 2011
  • This paper deals with the problem of precise impact angle control of an actual homing missile guided by biased proportional navigation (BPN). To do this, the BPN guidance loop including dynamic lag is modeled as the confluent hyper-geometric differential equation and its analytic solution is derived. Based on the solution, a systematic way to determine the bias constant is newly devised. Different from the existing BPN solution obtained by ignoring the dynamic lag, the proposed one can exactly describe the behavior missile before target interception. hence it is drastically improved the angle constrained terminal guidance performance.

  • PDF

An Enhanced DBSCAN Algorithm to Consider Various Density Distributions for Educational Data (교육데이터 정제를 위한 다양한 밀도분포를 고려한 개선된 DBSCAN 알고리즘)

  • Kim, Jeong-Hun;Nasridinov, Aziz
    • Proceedings of The KACE
    • /
    • 2018.01a
    • /
    • pp.41-44
    • /
    • 2018
  • 교육데이터마이닝은 다양한 교육 환경에서 생성되는 막대한 양의 데이터를 활용하여 학습자들의 학습 유형, 학습 진도를 분석, 예측하고 교육 성취를 효과적으로 향상시키는 것을 목적으로 한다. 효과적인 교육데이터마이닝 결과를 얻기 위해서는 교육데이터에 대한 정제 과정이 필요하며 DBSCAN 클러스터링을 통해 교육데이터에 포함된 노이즈 데이터를 제거하고 생성된 각 클러스터에서 동일한 비율로 데이터를 추출함으로써 편향되지 않은 표본 데이터를 생성할 수 있다. 하지만 DBSCAN은 두 개의 전역 매개변수에 의해 다양한 밀도분포를 가지는 클러스터를 생성할 수 없다는 문제점이 있으며 이는 교육 데이터를 정제함에 있어 치명적인 문제점이 될 수 있다. 본 논문에서는 DBSCAN의 문제점을 개선하고 클러스터링 정확도를 향상시키기 위해 고정된 매개변수를 사용하지 않고 각 밀도분포에 대해 최적의 입력 매개변수를 결정함으로써 다양한 밀도분포를 가지는 클러스터들을 효과적으로 생성하는 C-DBSCAN을 제안한다.

  • PDF