• Journal of the Korean Data and Information Science Society
• /
• v.13 no.2
• /
• pp.329-340
• /
• 2002

Two methods are proposed for constructing a confidence interval on the among group variance component in a unbalanced one-way random effects model. Computer simulation is used to compare these methods with alternative procedures. The results indicate that the method1 and methods2 perform well over small group size and large sample size respectively.

• Proceedings of the KAIS Fall Conference
• /
• 2000.10a
• /
• pp.245-250
• /
• 2000

고습도 또는 결로시 내수성을 지니는 저항형 습도센서를 제조하기 위하여 vinylbenzyl tributyl phosphonium chloride를 포함하는 4원 공중합체를 합성하여 저습도와 고습도 범위에서 측정이 가능한 습도센서용 감습막을 제작하였다. 1,5-dibrompentane과 4차 염화 가교 반응을 통하여 최종 저항형 습도센서를 제작하였다. 감습막은 알루미나 기판에 한 쌍의 금 paste가 인쇄된 전극을 사용하였으며, 감습막은 다양한 비율의 vinylbenzyl tributyl phosphonium chloride, 2-(dimethlamino)ethyl methacrylate, 2-ethylhexyl acrylate, 그리고 [2-(methacryloyloxy)ethyl]trimethyl ammonium chloride 등을 이용하여 제조하였다. 감습막은 micro-syringe를 이용하여 도포하였으며 건조 oven에서 50℃에서 6시간 동안 가교반응을 진행하였다. 습도센서의 임피던스 특성은 2-(dimethylamino)ethyl methacrylate 또는 [2-(methacryloyloxy)ethyl]trimethyl ammonium chloride의 함량이 증가할수록 감소하였다. vinylbenzyl tributyl phosphonium chloride / 2-(dimethylamino)ethyl methacrylate / 2-ethylhexyl acrylate / [2-(methacryloyloxy)ethyl]trimethyl ammonium chloride의 조성비가 4/4/1/1인 공중합체의 경우 30-90%RH 범위에서 2.64 ㏁ - 3.11 ㏀의 임피던스 특성을 보였으며 우수한 직선성과 낮은 히스테리시스 나타내었다.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.3
• /
• pp.219-225
• /
• 2018

The aim of the research is improving the quality of concrete by using the alternative aggregate resources and recycling wastes. To make a combined aggregate fitted in standard particle size distribution curve, crushed sand from blasted rock debris was used as a base aggregate. Additionally, to increase the portion of fine particles, sea sand was mixed. Although these aggregate combination fit the standard particle size distribution curve, in this research, raw coal ash was replaced as a microfine. According to the experiment, by replacing 5% raw coal ash, the most favorable results were achieved in aggregate gradation and cement mortar quality.

• Journal of Korea Water Resources Association
• /
• v.47 no.8
• /
• pp.685-691
• /
• 2014

River bank filtration techniques seek to improve river water quality via natural processes occurring when river water is induced to a river bank. When water is pumped from multiple wells, phenomenon known as well interference affect pumping rates. Pumping wells of a bank filtration facility are connected by pipelines. In theses cases well interference is caused not only by groundwater drawdown but also by pipe headloss which depend on flow rates. In this work a comprehensive analytical method which handles groundwater flow and pipe flow is used to evaluate interferences and ratios of river water in pumping wells. A realistic case was used as an example.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.29-29
• /
• 2011

SWAT (Soil and Water Assessment Tool) 모형은 물리적 기반의 준분포형 강우-유출 모형으로서, 대규모의 복잡한 유역에서 장기간에 걸친 다양한 종류의 토양과 토지이용 및 토지관리 상태에 따른 유출과 유사 및 오염물질의 거동에 대한 토지관리 방법의 영향을 예측이 가능하여, 수자원 관리 계획 및 유역관리를 위한 의사결정 지원 등 그 적용 범위가 매우 광범위하다. 이러한 모형의 적용성 검증을 위해서는 매개변수 민감도 분석 및 검 보정, 예측 불확실성 분석을 필요로 한다. 최근 수문 모델의 불확실성을 분석하기 위한 다양한 기법들이 개발 되었는데, 본 연구는 충주댐 유역(6,581.1 m)을 대상으로 유역출구점의 실측 일 유출량 자료(1998~2003)를 바탕으로 SWAT 모형의 유출관련 매개변수(총 18개)에 대한 불확실성 분석을 실시하였다. 이때 사용된 분석 기법으로는 SUFI2 (Sequential Uncertainty FItting algorithm 2), GLUE (Generalized Likelihood Uncertainty Estimation), ParaSol (Parameter Solution)등을 적용 하였다. 이러한 기법은 모두 SWAT-CUP (SWAT-Calibration Uncertainty Program, Abbaspour, 2007) 모형에 탑재되어있으며, 모형의 결과로써 검 보정, 매개변수의 민감도 분석, 각종 목적 함수 및 불확실성의 범위 등이 자동으로 산출 되므로 모형의 사용자가 불확실성 평가 기법의 분석 및 비교를 손쉽게 할 수 있다. 그 결과 대표적인 목적 함수인 결정 계수( $^2$)와 NSE (Nash-Sutcliffe Model Efficiency)는 모두 0.65에서 0.92사이의 값을 나타내어 대체적으로 모의가 잘 이루어졌음을 알 수 있었다. 그러나 불확실성의 범위를 나타내는 지표인 p-factor 및 r-factor에서는 평가 기법 별로 그 차이가 확연하게 드러났다. 여기서 p-factor는 불확실성 범위에 실측치가 포함되는 비율이며, r-factor는 불확실성의 상대적인 범위로 각각 1과 0에 가까울수록 모의 기법의 성능이 우수함을 의미한다. 세 가지 알고리듬 중에서 SUFI2의 p-factor가 약 0.51로 가장 높게 나타났으며, ParaSol의 r-factor가 0.00으로 가장 작게 나타났다. 여기서 p-factor는 불확실성 범위에 실측치가 포함되는 비율이며, r-factor는 불확실성의 상대적인 범위를 의미한다. 본 연구의 결과는 SWAT 모형을 이용한 수문모델링에서 수문분석에 따른 예측결과의 불확실성을 정량적으로 평가함으로서, 모형의 적용성 평가 및 모의결과의 신뢰성 확보에 근거자료로 활용이 가능할 것으로 판단된다.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.519-524
• /
• 2002

In this paper we study the qualify of sequential coverage analysis under a scenario of distributed stochastic simulation known as MRIP(Multiple Replications In Parallel) in terms of the confidence intervals of coverage and the speedup. The estimator based in the F-distribution was applied to the sequential coverage analysis of steady-state means. in simulations of the $M/M/1/{\infty},\;M/D/I/{\infty}\;and\;M/H_{2}/1/{\infty}$ queueing systems on a single processor and multiple processors. By using multiple processors under the MRIP scenario, the time for collecting many replications needed in sequential coverage analysis is reduced. One can also easily collect more replications by executing it in distributed computers or clusters linked by a local area network.

• Korean Journal of Food Science and Technology
• /
• v.32 no.3
• /
• pp.500-506
• /
• 2000

The effects of sodium stearoyl lactylate(SSL) on the thermal properties of wheat starch and amylopectin, and the crystallinity properties of amylopectin were investigated using differential scanning calorimetry(DSC) and X-ray diffractometer. On the rescan(second heating), amylopectin produced the featureless thermogram shown at the second heating, and SSL alone melted at $40{\sim}55^{\circ}C$, while the mixture of amylopectin containing 8% water and SSL(10:1), presenting the evidence of AP-SSL complex, showed differentiate melting temperature(other crystallinity) from SSL alone. Also, the melting enthalpy of AP and SSL mixture by subsequent heating and cooling were continuously increased. Further, the mixtures of wheat starch: SSL (5:1, w/w) and amylopectin: SSL(5:1, w/w), indicated AP-SSL complex, showed the reversible melting peak at temperature range of $60{\sim}70^{\circ}C$ together with melting peak of SSL observed at temperature range of $40{\sim}55^{\circ}C$. AP-SSL complex in the X-ray diffraction, compared V-form of amylose-lipid complex, exhibited characteristic peaks($2{\theta}$, 5.57, 20.903, 23.227). The gelatinization enthalpy value of wheat starch in the presence of SSL, observed at temperature range of $50{\sim}70^{\circ}C$, was decreased at total water content 60%, whearas had no significant effect at total water content 40, 50%, and also, SSL increased melting enthalpy of amylose-lipid complex. The extent of AP and wheat starch retrogradation wasreduced significantly by SSL.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.21 no.2
• /
• pp.81-96
• /
• 2010

This study aimed to suggest metadata elements for online reference resource systems based on users' perceptions. We surveyed librarians in four types of libraries, asking them indicate the need for each of 17 metadata elements. The survey results were compared to the current data input rates of the system, which has been operating for the past two years. Based on both the respondent data and current data input rates, we suggested that title, description, subject, creator, type, identifier, language, coverage, location, and tag elements must be included in the system as the metadata elements for online reference resources. n addition, the input rates of creator and copyright were 20.20% and 18.30%, respectively, but the respondents answered that these items were needed 82.15% and 82.77%, respectively. Therefore, these two items are necessary as metadata elements. On the other hand, the data input rates of type, source, date, relation, and contribution were less than 3%, but almost 70% of respondents answered that all these items were needed. So further research should be performed to determine whether or not these items are needed for online reference resource systems.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.47-58
• /
• 2009

Calibrating toll roads of highway networks needs additional weights within volume delay functions not like other general highway lints. However, current methods assigning additional weights in the volume delay function of toll roads are not sufficiently enough to predict real toll road volumes measured, since it does not consider discounting rates and an extra charges. This study develops methods to improve relevant and reliable volume delay functions. Suggested ideas include a method of weighting volume delay functions considering a value of time of vehicle types, a method of weighting volume delay functions considering lane distributions of vehicles, and a method of weighting volume delay functions considering percentages of link lengths per a number of lanes of toll roads. It is found that the method of weighting volume delay functions considering lane distributions of vehicles show most reliable and appropriate results, while the first method shows overestimation and the third method does underestimation of highway link volumes. In terms of assignment methods, total OD equilibrium assignment shows better results than PCU based assignment.

• 한국해양학회지
• /
• v.24 no.4
• /
• pp.194-205
• /
• 1989

In order to study the biomass of primary producer, phytoplankton is collected monthly September 1985 to August 1986 in Ch$\check{o}$nsu Bay. Phytoplankton carbon contents which are calculated from phytoplankton volume were ranged from $26.7{\mu}gC/l$ to $960.7{\mu}gC/l$, and average carbon contents of each month lie in the range of $58.6-684.7{\mu}gC/l$(annual mean $208.5{\mu}gC/l$). For net plankton analysis with the carbon contents, cell numbers, and chlorophyll concentrations show a close correlation, while for nanoplankton the correlation was low, indicating that nano-fraction includes a significant portion of picoplankton. Also, the multiple regression analysis with carbon content, cell number, and chlorophyll concentration to size fraction well illustrate the prime importance of the net-fraction in phytoplankton group. C/Chl-a ratios ranged from 9.1 to 100.5, average rations of net- and nanoplankton are 111 and 6.4, respectively. The greater net plankton faction is, the higher C/Chl-a ratio is, however in case of high nanoplankton portion C/Chl-a ratio show low level. These results indicate that the difference of C/Chl-a ratio per phytoplankton cell size be main factor for the variation of C/Chl-a ratio in Ch$\check{o}$nsu Bay. As C/Chl-a ratio fluctuates greatly in coastal ecosystem, that use of a direct conversion of convert chlorophyll to organic carbon may lead erronous estimation.