• Composites Research
• /
• v.30 no.3
• /
• pp.223-228
• /
• 2017

The article explains about development of flame retardant self-reinforced composites (FR-SRC) through compression molding technique by utilizing Polypropylene (PP), Ammonium polyphosphate (APP) and chitosan. The effect of APP and chitosan on mechanical, thermal and flame retardant properties in FR-SRC were studied. The mechanical strength of FR-SRC is enhanced than Pure SRC. However, the strength is decreased significantly with increasing the concentration of both flame retardant fillers. But comparison, chitosan filled FR-SRC is stronger than APP filled FR-SRC. In case of flame retardancy, APP is more effective than chitosan. These results can be applicable to provide light weight and recyclable flame retardant self-reinforced composites for automobile and packaging industries, etc.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.55-61
• /
• 2009

In order to observe the impact of a type of vehicles for traffic flows and pavement, vehicle classifications is conducted. Korean Ministry of Land, Transport and Maritime Affairs provides 12-type vehicle classifications on National expressways, National highways, and Provincial roads. Current AVC (Automatic Vehicle Classification) devices decide vehicle types comparing measurements of vehicle lengths, wheelbases, overhangs etc. to a reference table including those of all types of models. This study developed an algorithm for macroscopic vehicle classification which is less sensitive to tuning sensors and updating the reference table. For those characteristics, trend lines in vehicle lengths and wheelbases are employed. To assess the algorithm developed, vehicle lengths and wheelbases were collected from an AVC device. In this experiment, this algorithm showed the accuracy of 88.2 % compared to true values obtained from video replaying. Our efforts in this study are expected to contribute to developing devices for macroscopic vehicle classification.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.169-169
• /
• 2003

쌀의 영양적 가치는 쌀의 전분은 뇌의 활동을 돕고 비만과 당뇨병을 예방하는데 효과적이다. 쌀은 비록 단백질 함량과 필수 아미노산 함량은 낮지만 그 질만큼은 모든 곡류중에서 가장 우수한 단백질 자원을 갖고 있어 콜레스테롤 저하와 혈압조절, 암예방 등에 효과가 있다. 이밖에도 쌀에는 엽산을 포함한 비타민 B군은 물론 비타민 E, 마그네슘 등이 풍부하다. 비타민 E 등은 강력한 항산화작용를 하기 때문에 노화 방지에 효과가 있다. 이와 같은 영양적 가치에도 불구하고 1990년대에 들어서면서 식생활의 서구화, 고급화 물결로 인해 국민 1인당 쌀 소비량은 감소추이를 나타내고 수입에 의존하는 밀가루 소비량은 지속적으로 증가하고 있다. 쌀 생산량의 95% 이상이 밥으로 소비되고 있고 그밖에 여러 가지 가공방법에 따라 주식이외의 가공식품이 개발, 이용되고 있으나 그 비율은 아직 미미한 실정이므로 쌀의 소비를 보다 적극적으로 촉진하기 위해서는 쌀을 하나의 가공 이용 원료로서 인식하는 발상의 전환이 요구된다. 이에 따라 쌀의 지속적인 수요창출과 간편성을 고려하여 밥 대신 간편하게 식사대용으로 많이 이용되고 있는 국수류에 이용하고자 하였다. 증숙면은 압출식 증숙면 제조시설만 있으면 연속 공정이 가능하고 생산된 면을 포장하면 곧바로 상품의 되며 소비자가 식용할 때 제품의 식감이 우수하다는 장점이 있다. 밀가루에는 글루텐이 12%정도 함유되어 있어 반죽이 만들어지고 이를 이용하여 제면이 가능하나 쌀만으로는 면을 만들기 어렵기 때문에 일반적으로 쌀가루에 밀가루를 혼합하여 건면을 제조한다. 증숙면식 쌀 국수를 만들기 위해서는 쌀가루와 밀가루의 혼합후 물성개량제의 첨가가 필요하다. 따라서 본 연구에서는 식품첨가물로 사용되는 성분중에 글루텐, 곤약, 유화유지를 적절히 배합 사용하여 증숙식 쌀국수를 만들고, 유통후 소비자에 의해 식용될 때에 적절한 물성을 유지할 수 있도록 하여, 최적의 상품성을 지닌 쌀 국수를 제조하고자 하였다. 먼저 예비실험을 통해 쌀가루와 밀가루의 혼합비는 70:30이 가장 우수하였다. 여기에 물성개량제로 글루텐(l％,2％,3％), 곤약(0.5%,1%,2%), 유화유지(1%,2%,3%) 비율을 각각 달리하여 쌀가루에 첨가하여 증숙면식 쌀 국수를 제조한 후 관능적인 특성과 기계적 특성을 비교, 검토하였다. 글루텐은 외관은 좋지 않으나 텍스쳐 면에서 가장 좋게 평가되었고, 곤약은 관능적 특성과 기계적 특성에서 좋게 평가되었고, 유화유지는 텍스쳐 보다는 면의 광택효과와 노화방지에서 좋게 평가되었다.

• Composites Research
• /
• v.37 no.3
• /
• pp.143-149
• /
• 2024

This paper measures the mechanical properties of corrugated cardboard, an eco-friendly packaging material, and applies these measurements to the MAT_PAPER model in LS-DYNA for finite element analysis. Although MAT_PAPER is primarily designed for modeling the behavior of paper, this research demonstrates its applicability to corrugated cardboard as well. Tensile, compression, and shear behaviors of a corrugated cardboard were measured and analyzed, and based on these results, six yield surfaces were derived and integrated into the MAT_PAPER model. By comparing the finite element analysis of the material tests and the low velocity collapse analysis of the corrugated cardboard square boxes with each experimental results, it was shown that the behavior of corrugated cardboard could be equivalently considered well by the MAT_PAPER model. However, since the model is not rate-dependent, the high strain rate properties of liner materials were measured and used for strain rate correction. Consequently, this matches well with the results of the high-speed compression tests of the corrugated cardboard square boxes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.741-749
• /
• 2019

A hydraulic breaker attached to an excavator is a kind of constructuion equipment which is used for the disassembling of buildings, crashing road pavement, breaking rocks at quarry and etc. Therefore, the performance of the hydraulic breaker is mainly evaluated by the impact quantity and impact efficiency, which is an important factor for both the manufacturer and the user. In this paper, modeling and simulation for the prediction of the impact of the hydraulic breaker was conducted according to hydraulic pressure area and operating conditions of the hydraulic valve and piston using the commercial tools SimulationX for the 20ton hydraulic breaker which is mainly used in construction site. In order to verify the reliability of modeling and simulation, the results of previous experimental studies were compared and verified. The results of this study are expected to be useful for predicting the impact of the hydraulic breaker at the design stage before manufacturing and for studying parameters for improving the impact quantity. In addition, the manufacturer predicts that the development time and cost will be reduced through trial and error prevention by predicting the impact of the hydraulic breaker through the results of this paper.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.1
• /
• pp.9-15
• /
• 1986

To establish an efficient light control method using three covering materials on tunnel shaped rice seed-bed at greening stage after seedling emergence, four rice cultivars, Nampungbyeo, Taebaegbyeo, Seonambyeo, and Seomjinbyeo were sown on 15 April and 10 May in 1983 and 1984 respectively. After seedling emergence by a simplified emerging methods the seedling boxes were moved onto tunnel shaped seed-bed which was covered with combined matrials of PE film, silverpoly sheet, and spunbonded polyester fabric. For machine transplanting of rice seedlings in cases of early season and optimum season seeding in central part of Korea, PE film tunnel with silverpoly mulched, and PE film tunnel methods with spunbonded polyester fabric mulched reduced injuries of non-parasitic seedling damping-off and a albinism as affected by it, protected rice seedlings from injuries by extremely low temperature in the night, and reduced less differences in diurnal temperature than those in the other covering methods. At late season seeding for double cropping system of paddy field in southern part of Korea, a single silver-poly or a single spunbonded polyester fabric-covered tunnel method showed good green seedlings, and prevent-ed extreme rising of diurnal temperature by light interception in the tunnel.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.2
• /
• pp.165-170
• /
• 1994

High quality rapeseed cultivars including Nojeokchae, Yeongsanyuchae Halla-yuchae and Tamrayuchae have been released and recommended as a zero erucic acid variety to Cheju farmers for 13 years, where is a major rapeseed production area in korea. However, rapeseeds produced in Cheju island in 1992 and 1993 contained 47.7% and 37.0% of erucic acid respectively resulting in poor quality oil being not adequate for edible oil. It was considered that the zero erucic acid varieties did not have an opportunity to be cultivated in Cheju island by farmers living in the Island. Thus, the new rapeseed varieties without erucic acid should be bred and recommended to the farmers of southern area of Korea as a multiple cropping crop just after rice harvest, and for large scale mechanized and labour-serving rapeseed culture. The change of rapeseed breeding goal would be desirable for fatty acid composition improvement of rapeseed to develop varieties adaptable to southern part of Korea, and to produce rapeseed oil directly used as an edible oil safely.

• Journal of Biosystems Engineering
• /
• v.23 no.5
• /
• pp.499-506
• /
• 1998

An expert system to diagnose cucumber's diseases and nutritional disorders(ESCD) was developed using HCLIPS. The knowledge base was made through interviews with farmers who had cultivated cucumbers for years and experts who had a specialty of cucumber's diseases and disorders. The photographs of cucumber's diseases and nutritional disorders were used to assist users to comprehend queries of the ESCD. The ESCD was able to diagnose 11 fungal and bacterial diseases and 10 nutritional disorders, which could be frequently found in the fields and greenhouses. Diagnosis accuracy of the developed ESCD was validated by the farmers and the expert who joined the development.

• Journal of Biosystems Engineering
• /
• v.20 no.4
• /
• pp.323-332
• /
• 1995

The horizontal compression test of some selected corrugated fiberboards was performed to determine the cushioning properties of them. Creep behavior of the corrugated fiberboard boxes, which have been widely used in rural area for packaging fruits and vegetables, was tested. The flute crushing stress of the corrugated fiberboard depended upon mainly the basic weight of the corrugated medium, comparing with the combined basic weight of corrugated fiberboard. When moisture content of the corrugated fiberboards was increased about 8% (d.b.), the flute crushing stress of them was decreased at the rate of 44%~64%. The cushion factor of the sample fiberboards showed much higher value at the lower moisture content of them. These trends appeared to be more obvious at the lower applied stress levels. Also, the cushion factors of the double wall corrugated fiberboards(DW) were observed to be little higher than those of the single wall corrugated fiberboards(SW). The creep behavior of the sample boxes was found to be highly moisture and static load dependent. The creep behavior of the corrugated fiberboard boxes could be well analyzed by the asymptotic slope derived from the creep model.

• Journal of Biosystems Engineering
• /
• v.28 no.3
• /
• pp.245-252
• /
• 2003

This study was investigated the possibility of measuring chlorophyll in paddy crops using two kinds of chlorophyll meters(SPAD-502, Field Scout). The results of correlation analysis showed the 0.7758(r$^2$) relationship between the chlorophyll contents of paddy leaves measured by SPAD and spectrophotometer. It indicates that chlorophyll content in paddy crops could be measured using the SPAD. Considering the data of the SPAD and Field Scout there was significant difference between their chlorophyll contents measured by the SPAD and Field Scout. Likewise, such results were consistent with the corrected data using light intensity. According to the results, it can be concluded that it is difficult to describe the rice chlorophyll measured by the Field Scout more accurately than the SPAD when using one standard spectrum and another spectrum for reflectance measuring. The chlorophyll variance measured at a research institute and a farmer's field revealed that the output of SPAD was more reliable than that of the Field Scout.