• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12A
• /
• pp.991-997
• /
• 2009

Transmit beamforming is simple method to achieve the full diversity gain that is available in multiple antenna(MIMO) wireless systems. Unfortunately, the prior condition to achieve this gain requires perfect channel knowledge at both transmitter and receiver, which is impractical on account of limited feedback link. Therefore, for the practical system, codebook based feedback scheme is often employed, where the beamforming vector is selected from the codebook to maximize the output signal-to-noise ratio (SNR) at receiver, and the receiver only sends back the index of the best beamforming vector to the transmitter. In this paper we derive analytical expression of average bit error rate (BER) for the codebook based transmit beamforming MISO system over the feedback error channel. Using this analytical result, we present optimum codebook indexing scheme to improve the performance of this system. From some selected numerical examples we show that our proposed codebook indexing scheme can provide nonnegligible performance improvements in terms of average BER over the severe feedback error channel.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.3
• /
• pp.27-33
• /
• 2008

In this paper, we propose a cognitive beamforming scheme for coexistence of CR (Cognitive Radio) and IR (Incumbent Radio) systems. In order to maintain the priority of the IR in spectrum utilization the proposed cognitive beamforming scheme needs to have the CR not cause any interference to the IR systems occupying the same frequency band at the same time. In addition the proposed scheme has to provide maximum channel gain to the CRU (CR User) in a boundary of satisfying the former criterion. For this purpose, the proposed scheme does not cause any interference to the IRU (IR User), while the CRU is served without additional radio resource consumption. From simulation, we confirmed that when using the proposed scheme the CRU does not interfere with the IRU and there is little bit error rate performance degradation of the CRU as compared to that of the ideal beamforming system, which does not consider the IR priority.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.451-456
• /
• 2016

Because GPS signals are weak, system jamming is a real and present danger. This can happen when the receiver is subjected to intentional or unintentional interference by a transmitter. If the jamming signal is strong enough, the receiver can be operated to take corrective action automatically. Current methods to protect GPS receiver from jamming condition are based on spatial filtering. In this paper, the beamforming as referred to in signal processing technique used in arrays for directional signal reception was suggested and analyzed for anti-jamming. In order to change the directionality of the array when receiving a jamming signal, a beamformer can control the signal at each sensor. Therefore, cutoff angle ${\theta}$ was measured in the opposite direction of the jammer. GPS signals are only processed when the antenna element is within inside the cutoff angle. As a result, GPS positioning can be used in condition under cutoff angle $30^{\circ}$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.6
• /
• pp.653-663
• /
• 2014

To cope with an increasing amount of data traffic, research efforts are being made to maximize the data rate by reducing the interference between the transmission nodes. This paper also focuses on interference control schemes utilizing antenna sub-array beam-forming. The first scheme relies on horizontal beam rotation which utilizes three types of narrow beam patterns. Different beam patterns are applied to transmit signals in rotating fashion to control the interference. The second scheme is based on user-specific sub-array beamforming, which uses the precoding matrix based on users' location and controls the amount of interference in the multi-user environment. The performance of the proposed schemes is evaluated using the computer simulation to demonstrate the performance enhancement.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.949-958
• /
• 2018

A voice recognition control system is a system for controlling a peripheral device by recognizing a voice. Recently, a voice recognition control system have been applied not only to smart devices but also to various environments ranging from IoT(: Internet of Things), robots, and vehicles. In such a voice recognition control system, the recognition rate is lowered due to the ambient noise in addition to the voice of the user. In this paper, we propose a dual channel acoustic beamforming hardware architecture for MEMS(: Microelectromechanical Systems) microphones to eliminate ambient noise in addition to user's voice. And the proposed hardware architecture is designed as ASIC(: Application-Specific Integrated Circuit) using TowerJazz $0.18{\mu}m$ CMOS(: Complementary Metal-Oxide Semiconductor) technology. The designed dual channel acoustic beamforming ASIC has a die size of $48mm^2$, and the directivity index of the user's voice were measured to be 4.233㏈.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.3
• /
• pp.459-468
• /
• 2015

In this paper, we consider an uplink multiuser hybrid beamforming system where an access point (AP) communicates with multiple users simultaneously. The performance of the uplink multiuser hybrid beamforming system depends on the effective channel which is given by the product of the channel matrix and the analog beams. Therefore, to maximize the performance, we need to obtain the channel information and then select the analog beams appropriately by using the acquired channel information. In this paper, we propose the channel estimation method and low complexity analog beam selection algorithm for the uplink multiuser hybrid beamforming system. Additionally, our analysis shows that the proposed low complexity analog beam selection algorithm provides much less complexity than the optimum analog beam selection algorithm. From the numerical results, we confirm that the proposed low complexity analog beam selection algorithm has little performance degradation in spite of much less complexity than the optimum analog beam selection algorithm under the equal system configuration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.11-19
• /
• 2021

In this paper, we propose a non-orthogonal multiple access (NOMA) method based on channel alignment to simultaneously transmit multiple unicast and multicast streams in frequency-efficient manner. In this method, all receivers in a multicast cluster use the receive beamforming vectors that align their channels, and the base station uses the aligned channel information to design the transmit beamforming vectors that eliminate interference between multicast clusters. Using the effective receive channel information combined with the transmit beamforming vectors, unicast receivers design their own receive beamforming vectors that eliminate interference between unicast receivers. Since the proposed method effectively eliminates the interference, it achieves a higher sum rate than the existing orthogonal multiple access (OMA) method in high SNR regions. In addition, we present a hybrid method that exploits the benefits of the proposed NOMA method and the existing OMA method. Depending on the channel state, the hybrid method adaptively employs the existing OMA method, which improves the received signal power, in low SNR regions and the proposed NOMA method, which effectively eliminates the interference, in high SNR regions, thereby achieving a good sum rate over the entire SNR region.

• Aerospace Engineering and Technology
• /
• v.13 no.2
• /
• pp.131-141
• /
• 2014

Synthetic Aperture Radar (SAR) is a powerful and well established microwave remote sensing technique which enables high resolution measurements of the Earth surface independent of weather conditions and sunlight illumination. In this study, this paper first summarizes the basic SAR theory and the history of the SAR satellites. The second part of this paper gives an overview of new technologies for future SAR systems. New innovative concepts and technologies for SAR satellites will be digital beamforming, High Resolution Wide Swath (HRWS), Waveform Encoding, Terrain Observation by Progressive Scan (TOPS), and so on. These technologies will play an important role for future spaceborne SAR satellites.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2298-2304
• /
• 2015

In this paper, we provide a new approach which optimizes the vertical tilting angle of the base station for multi-cell multiple-input single-output (MISO) downlink active antenna systems (AAS). Instead of the conventional optimal algorithm which requires an exhaustive search, we propose simple and near optimal algorithms. First, we represent a large system approximation based vertical beamforming algorithm which is applied to the average sum rate by using the random matrix theory. Next, we suggest a signal-to-leakage-and-noise ratio (SLNR) based vertical beamforming algorithm which simplifies the optimization problem considerably. In the simulation results, we demonstrate that the performance of the proposed algorithms is near close to the exhaustive search algorithm with substantially reduced complexity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5C
• /
• pp.673-682
• /
• 2004

The adaptive beam-forming is promising approach for noise reduction in hearing aids. This approach has come in the focus of interest only recently, because of the availability of new and powerful digital signal processors. The adaptation U using usually a Least Mean Squares algorithm, updates the weight vector. In this Paper, we propose a fast wavelet based adaptive algorithm using variable step size algorithm which varies adaptive constant by the change of signal environment. We compared the performance of the proposed algorithm with the known adaptive algorithm using computer simulation of multi channel adaptive bemformer in hearing aids. As the result the proposed algorithm is suitable for adaptive signal processing area using hearing aids and has advantages reducing computational complexity. And we show the beam-forming system using proposed algorithm converges stably in a sudden change of system environment.