• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.147-157
• /
• 2019

The purpose of this study is to analyze the efficiency of urbanization in 31 provinces and cities in China, including both desirable and non-expected outputs produced during the urbanization process. Efficiency was analyzed by applying the SBM-DEA model using the urbanization calculation data of 2017 in 31 provinces and cities in China. The results show that the urbanization efficiency of eastern region is the highest, followed by central region and northeast region, and the urbanization efficiency of western region is the lowest. This study is meaningful in that it analyzes the efficiency of urbanization in 31 provinces and cities in China and suggests the direction of continuous urbanization policy. This study is limited in that it does not reflect the past trend only by conducting cross-sectional analysis for one year in 2017, and it is necessary to comprehensively evaluate urbanization efficiency by conducting additional longitudinal area analysis in the future.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.6 s.360
• /
• pp.24-30
• /
• 2007

In this paper, an energy detection-based low power, low complexity IR-UWB receiver in multipath impulse radio channel is presented. The proposed receiver has a simple 1-bit sampler for energy detection. Also, multipath signal received from multipath impulse radio channel is amplified and envelope of the signal is detected. Then, energy detection technique using integrator by summing multipath signals in certain period is adopted to minimize the BER loss by simple energy detection. In particular, in acquisition of a sample signal, SNR is additionally improved using a digital sampler. Symbol decision using several sampled signals is performed and thus the process of symbol synchronization is significantly simplified. Also, it is effectively designed to be compatible with influences of multipath and timing error. In addition, the proposed receiver complexity is reduced using pulse decision window. The performance of the proposed receiver is simulated based on IEEE 802.15.4a channel model and the algorithms are implemented on FPGA.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.4
• /
• pp.83-92
• /
• 1996

This paper describes Lombard effect compensation and noise suppression so as to reduce speech recognition error in noisy environments. Lombard effect is represented by the variation of spectral envelope of energy normalized word and the variation of overall vocal intensity. The variation of spectral envelope can be compensated by linear transformation in cepstral domain. The variation of vocal intensity is canceled by spectral magnitude normalization. Spectral subtraction is use to suppress noise contamination, and band-pass filtering is used to emphasize dynamic features. To understand Lombard effect and verify the effectiveness of the proposed method, speech data are collected in simulated noisy environments. Recognition experiments were conducted with contamination by noise from automobile cabins, an exhibition hall, telephone booths in down town, crowded streets, and computer rooms. From the experiments, the effectiveness of the proposed method has been confirmed.

• Journal of the military operations research society of Korea
• /
• v.34 no.1
• /
• pp.61-77
• /
• 2008

Data Envelopment Analysis(DEA) is a promising methodology to evaluate the relative efficiency of the decision-making units. We have compared the efficiency of six electric power generation companies in Korea using DEA. The analysis results by input-oriented CCR and BCC models are summarized as follows: first, different results were acquired between using input factors as total capacity of generators and as sub-totals of generator capacity based on primary energy sources. It is the result influenced by input factors which are characterized by the proportion of fixed costs(generating facilities) and variable costs(generation costs for primary energy), Second, the efficiency will be increased if the input factors selected, according to primary energy sources discussed in this research, are used during long-term expansion of electric power capacity plans. It is expected that this approach can give a feedback for management of electric power generation companies.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.2
• /
• pp.27-38
• /
• 2003

The characteristics and prediction model of the shear strength of unsaturated residual granite soils were studied in this paper. In order to investigate the influence of the net normal stress on the shear strength, unsaturated triaxial tests and SWCC tests were carried out by varying the net normal stress. Experimental data for unsaturated shear strength tests were compared with predicted shear strength envelopes obtained from existing prediction models. It was shown that the soil-water characteristic curve and the shear strength of the unsaturated soil varied with the change of the net normal stress. Therefore, to achieve a truly descriptive shear strength envelope for unsaturated soils, the effect of the normal stress on the contribution of matric suction to the shear strength has to be taken into consideration. In this paper, a modified prediction model f3r the unsaturated shear strength was proposed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11A
• /
• pp.909-917
• /
• 2009

In this paper, we proposed and implemented the method to efficiently generate TDD synchronization signal and the digital circuit for the RF repeater which can eliminate the shadow region in the wireless communication field using the time division duplex (TDD) method. After detecting the TDD signal from the transmitted or received RF signal, the detected TDD signal is fed to the RF repeater for the normal operation. The proposed technique detects the envelop of the downlink signal and amplifies the detected envelop, and then restores the degraded envelop with the proposed digital filtering method. Finally the restored envelop is manipulated to the TDD synchronization signal. Our focus on the proposed algorithm is to develop it with simple feature and low cost but robust performance. The proposed scheme was implemented to the integrated system which has both RF and digital circuit and tested under the same condition with the commercial WiBro service.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3A
• /
• pp.196-204
• /
• 2002

The Sinusoidal Transform Coding(STC) is a vocoding scheme based on a sinusoidal model of a speech signal. The low bit-rate speech coding based on sinusoidal model is a method that models and synthesizes speech with fundamental frequency and its harmonic elements, spectral envelope and phase in the frequency region. In this paper, we propose the 2.4kbps low-rate speech coding algorithm using the sinusoidal model of a speech signal. In the proposed coder, the pitch frequency is estimated by choosing the frequency that makes least mean squared error between synthetic speech with all spectrum peaks and speech synthesized with chosen frequency and its harmonics. The spectral envelope is estimated using SEEVOC(Spectral Envelope Estimation VOCoder) algorithm and the discrete all-pole model. The phase information is obtained using the time of pitch pulse occurrence, i.e., the onset time, as well as the phase of the vocal tract system. Experimental results show that the synthetic speech preserves both the formant and phase information of the original speech very well. The performance of the coder has been evaluated in terms of the MOS test based on informal listening tests, and it achieved over the MOS score of 3.1.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.4
• /
• pp.101-111
• /
• 2013

In this study, DEA (Data Envelopment Analysis) was carried out on the four bridges, which have the same extension (L=1,615m), in order to select the most superior, economical method of construction using the LCC concept of each bridge structure in the case of the Ulsan-Pohang double track railway which is scheduled to be constructed. DEA models were analyzed with the CCR model, which was designed for the evaluation of relative efficiency of each model. The initial construction costs, maintenance costs, indirect costs (user costs + indirect loss of social costs), and life cycle costs were used as input variables, and average duration was applied as the output variable. LCC was applied to calculate the input variables, and to get the costs of LCC, 100 years of period and 4.83% of real discount rate were applied, and the costs are classified into initial construction, maintenance, user, and indirect loss of social cost. The analysis results showed that the Method 2 and 3 were evaluated as the most efficient, and the other alternatives were evaluated as the following order; Method 1, the default, and Method 4.

• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.117-126
• /
• 2009

Korea Highway Corporation has played a role of the construction and operation of the highway for the past for 40 years. The private sector since the 90s has made highway construction and operation. Central government and local governments were paid at subsidy in least operating income to 1.5896 trillion won for private operators from 2001 to 2008. Thus, Korea Highway Corporation will have important implications for understanding the cost structure. Korea Highway Corporation, a general analysis of the input element is used efficiently. And the operation of labor and capital estimated highly of the substitution elasticities. Korea Highway Corporation are judged to need financial separation of a strategic outsourcing(business) enabled and the construction(maintenance and management) and business institutions. In addition, currently running at highway the operation of institutions combined to configure a new institution, if that institution invigorate the hi-pass, more of the country's highway believe to be increase operational efficiency.

• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.43-54
• /
• 2010

In order to improve the existing evaluation system of bus services and gain more reasonable analysis outputs, the authors evaluate the efficiency of 113 arterial bus routes in Seoul in 2009 using a modified BCC model considering not only desirable outputs but also undesirable outputs. Each Decision Making Unit (DMU) is assumed to use inputs such as possession costs, operating costs, the ratios of median bus stops overlapped route lengths to produce estimates of desirable outputs (the number of passengers and service satisfaction score) and undesirable outputs (CO2 emissions). According to the analysis, the modified BCC model considering both desirable outputs and undesirable outputs shows more appropriate results. DMUs would be more efficient on average to reduce nearly 10% of the 3 inputs (possession costs, operating costs, and overlapped route lengths) and increase by about 160% the ratios of median bus stops. Also, a Tobit regression analysis is conducted to identify the most effective variables for maximum efficiency and discover that the variable of possession costs and the ratios of median bus stops are statistically significant.