• Korean journal of applied entomology
• /
• v.16 no.2 s.31
• /
• pp.79-86
• /
• 1977

Four experiments were carried out under farmer's field conditions to determine economic threshold levels of major rice pests aad attempt a reduction in the number of insecticide applications. In the experiments were included check treatments, insecticide schedules representing the official recommendations to farmers, and several corrective treatments. A careful record was kept of insect pest densities and disease incidence. i) In the north at Suweon and Icheon where Chilo suppresalis. (Walk.), the striped rice borer, was active in the first generation, no significant yield differences were obtained between plots receiving several insecticide applications and those left totally unprotected. The mean yields were high (5.2-7.6t/ha). ii) First generation borer activity rising to $8.6\%$ injured tillers was below the economic threshold since no yield reduction was recorded in either japonica varieties or the high-yielding Tongil variety. iii) Evidence was obtained thst berer damage was made good by replacement of infested tillers (compensatory growth), C. suppressalis populations were always low in the second generation. iv) The experimental results obtained at Suweon and Icheon do not justify the present official recommendations of 6-7 pesticide applications. v) further south at Iri a substantial yield reduction occurred due to an early outbreak of stripe disease transmitted by Laodelphax striatellus (Fallen), the small brown planthopper; a mean of 1-2 individuals/hill was recorded immediately after transplanting. C. suppressalis probably contributed to this yield reduction. vi) Several applications against the vector failed to prevent the rapid spread of stripe to the susceptible variety in the Iri experiment: in surrounding fields the resistant Tonsil varivety was ralatively unaffected. vii) Pests of lesser importance were Nephotettix cinctieps (Uhler), Nilaparvata lugens (Stil), Sogatella furcifera (Horv..), and leaf miners.

• Korean journal of applied entomology
• /
• v.11 no.2
• /
• pp.101-107
• /
• 1972

This experiment was conducted in order to determine the fungi associated with ear blight of rice and their chemical control. 1, Pyricularia oryzes, Helminthosporium oryzne, Epicoccum purpurascens, Curvularia lunata, Cladosporium cladosporoides and Alternaria tenuis et al. were mainly detected in large quantities from the discolored seeds of recommended varieties but Trichoconis padwickii, Fusarium dimerum, and Nigrospora oryzae were mainly detected from Tongil. 2. Pyricularia oryzae, Nigrospora oryzae, and Curvularia lunate et at. were from the necks; Helminthosporium oryzae, Trichoconis padwickii, Stemphylium sp. , Cladosporium cladosporoides, and Alternaria tenuis et at. were from the branches of ear; and Phoma spp. was mainly detected from the kernels. 3. In the laboratory Difolatan WP $0.13\%$ gave good control of Helminthosporium oryzae, Cladosporium cladosporoides, and Alternaria tenuis, et al.; and Dithane M-45 WP $0.2\% gave especially good control of Pyricularia oryzae, Trichoconis padwickii, and Curvularia lunate. 4. In field experiments, the appropriate date of chemical spray was milk ripening stage or panicle emergence stage. Under these conditions Hinosan Ec and Kasugamin Ec were more effective than Difolatan WP and Dithane M-45 WP. However, the assessment of ear blight was complicated by a severe outbreak of neck blast.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.279-282
• /
• 2011

Projectile can be damaged during the storage and handling. Maximum range calculation of the ammunition was performed on the assumption that each projectiles have 1.5mm/3.3mm axisymetric dent on the surface. Drag coefficient for trajectory calculation was delivered from CFD using commercial software FLUENT. In the result of CFD, damaged projectiles those have 1.5mm/3.3mm axisymetric dent have similar drag coefficient compare with normal projectile in the region of subsonic. But, in supersonic region, drag coefficient was increased 3%, 9% each in average. In the result of trajectory calculation, Maximum rage was decreased 1%, 3% each.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.3
• /
• pp.88-94
• /
• 2006

In order to substitute current aluminum sabot and to increase the penetration performance of the kinetic energy projectiles, the research and development program for composites sabot has been conducted. For carbon/epoxy composites sabot, unidirectional carbon fiber reinforced epoxy prepreg was chosen and thick sectioned composites preforms with the different fiber angles along the circumferential direction of sabot were prepared by compression molding under the careful processing conditions at $150^{\circ}C$ for 1hour with $70kgf/cm^2$ curing pressure. The composites sabot demonstrated a weight reduction by approximately 30% than that of current aluminum sabot. The muzzle velocity of a kinetic energy projectile with composites sabot was measured to be about 63m/s higher than that with aluminum sabot. These results imply that the penetration performance is expected to be considerably increased when the composite sabot is applied to the kinetic energy projectiles.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.10a
• /
• pp.47-50
• /
• 2003

JA2 Propellants, made by non-solvent process, are of great interest for the tank gun propellant. This is due to high energy. The grain geometries of JA2 and modified JA2 propellant were designed for application to 105mm APFSDS projectile. The combustion, thermochemical, and interior ballistic properties of the propellant were tested and calculated. The performances of the propellant were evaluated out using 105mm slug T2 projectiles and 105mm tank gun. The muzzle velocity of the propellants was higher than that of the KM30 for K274 projectile.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.1
• /
• pp.53-57
• /
• 1990

Among the 6 treatment of not topped and suckered, topped and not suckered, hand suckered, maleic hydrazide treated, fatty alcohol treated to normal Hyangcho, and male sterile line, yield and Quality by price was lower at not topped and suckered, topped and not suckered or male sterile line plot. The content of petroleum ether extracts and ash was lower in hand suckered, maleic hydrazide and fatty alcohol plot, but the trends of reducing sugar, nicotine, and pH were in reverse. Reducing sugar was higher, nicotine and pH was lower in maleic hydrazide plot than in hand suckered or fatty alcohol plot. Filling value and combustibility was lower in maleic hydrazide plot than in hand suckered.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.4
• /
• pp.615-621
• /
• 2011

In this paper, the proper quantity of conditioning rounds has been studied using the statistical analysis on the basis of the acceptance test data of K676 and K677 propelling charge for K9 self propelled howitzer. In general, the muzzle velocity of the initial rounds tends to be a little lower than that of the succeeding rounds. The latter rounds are likely to have the constant velocities after firing the appropriate conditioning rounds. The main cause of velocity difference was proved to be the proper quantity of conditioning rounds by doing the correlation analysis among the initial tube temperature, the tube life and the quantity of conditioning rounds. The result of paired t-test shows that two rounds of conditioning projectiles are proved to be enough to maintain the constant velocity in the case of the acceptance test of K676 and K677 propelling charge.

• Journal of the Korean Magnetics Society
• /
• v.2 no.1
• /
• pp.69-74
• /
• 1992

This paper describes the energy and speed characteristics of an induction coil-gun. The coil-gun has some merits that it can be easily installed and repeatedly used many times, it does not damage mechanically in the course of launch and the force exerted on the projectile is distributed uniformly. An equivalent circuit is employed for modeling the coil-gun. The circuit equations and equation of motion are then derived based on the equivalent circuit. These equations are solved numerically by using Runge-Kutta method. Finally the energy transfer ratios are obtained according to the variations of the resonant frequency of driving circuit and charging voltage of capacitors. The muzzle velocities of projectile are also obtained according to the variations of electrical conductivity and initial position of projectile, firing angle of driving circuit, charging voltage of capacitor and resistance of driving coil, respectively.

• Korean Journal of Ichthyology
• /
• v.18 no.1
• /
• pp.55-58
• /
• 2006

Three juvenile specimens (40.7~58.4 mm SL) of orbicular batfish, Platax orbicularis were collected from the coastal waters of Jeju Island, and described as the first record from Korea. These specimens were characterized by having a diamond body shape with triangular dorsal and anal fins with V, 35~37 and III, 26~27 rays, respectively. The new Korean name of 'nam-bang-je-bi-hwal-chi' is proposed for the species.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.618-624
• /
• 1989

Ultrasonically induced bubble formation in thermoplastic matrix was investigated experimentally and theoretically. polystyrene was saturated with nitrogen under the pressure of 0.2 to 3.45 MPa in a pressure chamber, followed by pressure release and ultrasonic bubble nucleation. Zinc stearate was added to polystyrene as the nucleating agent to induce heterogeneous nucleation. Various mixture of low density polyethylene and polyethylene wax was also saturated with the gas. The foamed specimens with or without ultrasonically induced bubble nucleation was modeled by modifying the classical nucleation theory. The rate of ultrasonic nucleation was predicted for homogeneous and heterogeneous nucleation at a conical cavity. This study showed that the heterogeneous and heterogeneous nucleation at a conical cavity. This study showed that the heterogeneous nucleation must be employed for ultrasonic production of bubbles in a viscous fluid and the homogeneous nucleation for ultrasonic production of bubbles in a low viscosity fluid.