• Elastomers and Composites
• /
• v.42 no.4
• /
• pp.249-258
• /
• 2007

In this study, the EPDM powder which was surface activated by high temperature and shear pulverization process was prepared and the mechanical properties and odor material analysis were investigated. Analysis for particle size and size distribution of waste of the EPDM powder has been performed. The waste EPDMs used in this study were 4 types of solid, sponge, solid+sponge, and solid+metal. According to the results, the solid type showed the smallest particle size among the 4 types of EPDM powder. Effective surface devulcanization of EPDM powder could be obtained by the addition of the reclaiming agent. The dicumyl peroxide was considered as the best crosslink agent for dynamic vulcanization when the surface activated EPDM powder was blended with polyolefin in order to make TPE. Also, the optimum amounts of DCP was 6 phr in terms of surface crosslink reaction and mechanical properties of EPDM powder. The processes of water adsorption and rose oil addition were employed to remove the odor of EPDM powder caused by reclaiming agent. The GC/MS was used to analyze the odor compounds.

• Resources Recycling
• /
• v.21 no.6
• /
• pp.65-73
• /
• 2012

Selective catalytic reduction(SCR) catalysts are obtained from de-NOx system of thermoelectric power plant. A process was developed for valuable metals such as vanadium and tungsten recovery from spent SCR catalyst by using soda roasting followed by water leaching. Spent SCR catalyst having $V_2O_5$(1.23 mass %) and $WO_3$(7.73 mass %). For getting soluble metal forms of the targeted metals like vanadium and tungsten soda roasting process was implemented. In soda roasting process, sodium carbonate added 5 equivalent ratio at roasted temperature $850^{\circ}C$ with 120 min roasted time for $544{\mu}m$ particle size of spent SCR catalyst. After soda roasting process moved to water leaching for roasted spent catalyst. Before leaching process the roasted spent catalyst was grinded up to $-45{\mu}m$ size. The leaching time is 30 min at $40^{\circ}C$ temperature, 10 % pulp density. The final leaching efficiency obtained 46 % of vanadium and 92 % of tungsten from present process.

• Journal of the Korean Society of Radiology
• /
• v.84 no.5
• /
• pp.1191-1196
• /
• 2023

Bronchial artery aneurysm (BAA) is a rare disease, and multiple aneurysms of a single bronchial artery are rarer. Regardless of the size of the lesion, it is at risk of rupture and can cause massive hemoptysis or severe pain. We report a rare case of bronchial artery embolization (BAE) of multiple aneurysms of a single bronchial artery. During medical examination, a 64-year-old female was diagnosed with multiple BAAs and endobronchial lesions in the right lower lung on CT 10 years prior to presentation to our hospital. Further evaluation of the lesions was recommended; however, the patient was lost to follow-up. The patient complained of dyspnea and visited our hospital, and the size of the BAA had increased on CT. BAE was done successfully using N-butyl-2-cyanoacrylate and detachable coils. Follow up CT after BAE showed significant decrease in extent of inflammatory lesion in the right lung.

• Journal of Chest Surgery
• /
• v.31 no.4
• /
• pp.362-368
• /
• 1998

The aim of this study was to evaluate a usefulness of serum SCC antigen in diagnosis or evaluation of therapeutic effect of lung cancer by investigation of the differences of SCC antigen concentration in lung mass according to TNM staging, and mass size of lung cancer. And the other aim was to know whether SCC antigen plays a role in infiltrative growth of lung cancer or not, comparing with concentration of epidermal growth factor receptor(EGFr) in tissue which is related with growth and differentiation of tumor cell. The results of this study were as follows. The concentration of SCC antigen in squamous cell carcinoma of lung(69${\pm}$25ng/ml) was higher than in unaffected lung tissue(34${\pm}$7ng /ml).(p＜0.05). The concentration of SCC antigen was higher in squamous cell carcinoma (69${\pm}$25ng/ml) than in adenocarcinoma (35${\pm}$25ng/ml) (p＜0.05), but the concentration of EGFr showed no any significant difference in both histological types. In small sized mass(＜3cm in diameter) the concentration of SCC antigen in central portion of tumor was higher than that of peripheral portion, whereas in large sized mass($\geq$5cm in diameter), the concentration of SCC antigen in peripheral portion of tumor was higher than that of central portion.(p＜0.05). The concentration of EGFr according to tumor size was not significantly different in central and peripheral portion of tumor. The concentration of SCC antigen according to TNM staging of lung cancer was that from central portion was higher in stage I, II, but that from peripheral portion was higher in stage III, IV (p＜0.05). The concentration of EGFr from central portion was higher in higher TNM stage(not significant) but that from peripheral portion shows no significant changes. In conclusion, the concentration of SCC antigen in tissue was higher in squamous cell carcinoma than in unaffected lung tissue or adenocarcinoma, and the concentration of SCC antigen increased according to tumor size or TNM staging like in serum level. so, serum SCC antigen is a useful tumor marker to diagnose or evaluate therapeutic effect of squamous cell carcinoma of lung. But further studies are necessary to confirm the relation of infiltrative growth in lung cancer and concentration of SCC antigen because there was a different pattern of regional tissue concentration of SCC antigen and EGFr

• Elastomers and Composites
• /
• v.33 no.4
• /
• pp.290-296
• /
• 1998

Recycling of waste tire has been limited and very simple, few applications have been observed. This study introduces a new elastic and permeable pavement made of scrap tire. Experimental results showed that key factors affecting the compressive strength were the size of scrap tire, size of aggregate, amounts and property of binder. Also, the water permeability depended on the size of aggregate and scrap tire. The compressive strength and water permeability of the samples were 1.4 and 116 times higher than those of the conventional porous cement concrete, respectively.

• Journal of Chest Surgery
• /
• v.29 no.8
• /
• pp.816-821
• /
• 1996

Lung transplantation is the established treatment for the end stage lung disedse find preservation of the organ is a major obstacle In performing lung transplantation. For solving this problem, we evaluated the histopathologic changes for various preservation solutions. Male mongrel dogs of similar size and weight (15∼20 kg) were used. The dog lungs were flushed with 4fl normal saline(group 1 'n:5): Modified Euro-Collins solution(group 2 n:5) and University of Wisconsin solution (group 3 : n=6), 60m11kg through a catheter placed in the main pulmonary artery aft r flushing of PGE 1 (20ng1kg). The lungs were preserved for 60 hours and measured dry and wet weights. Histologic specimens were taken every 6 hours and %toed for light microscopic evaluation. The edema ratio of the lungs peaked in 12 hours although there was no difference between the groups. Histologically, alveolar septal changes developed in one case (20%) after 1 hour preservation with normal saline. In case of the University of Wisconsin solution, the alveolar septal distortions and swellings were seen in 1 cases (20%) after 6 hours preservation compared with 3 cases (60%) after 6 hours preservation with Modified Euro-Collins solution. Changes of the pneumocytes were observed after 24 hours preser- vation in group 1, after 48 hours preservation in group 2 and after 60 hours preservation in group 3. We conclude that University of Wisconsin solution might have a superior preservation effect compare to normal saline and Modified Euro-Collins solutions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.04b
• /
• pp.449-453
• /
• 1994

공작기계의 가공정밀도는 공구와 공작물간의 상대변위 크기로서 평가되는데, 이 상대변위는 가공중에 발생 하는 절삭력이 공구-척-주축-기계구조물-안내면-가공테이블-공작물로 이어지는 하중전달 폐곡선을 흐르면서 경로상의 정적, 동적 취약부의 주된 영향을 받아 생기거나 각 요소부품의 변형이 누적되어 생겨난다. 본 연구에서는 주축의 취약부를 규명하기 위하여 정적으로는 정적 처짐곡선을 이용하고, 동적으로는 진동모우드의 굽힘곡선을 이용하여 주축선단의 처짐에 가장 영향을 많이주는 부위를 파악하였다. 취약부의 개선방법으로는 주축지름을 변화시켜 주축선단 근처에서 굽힘이 집중되지 않도록 유도하였다. 그리고 구조개선의 효과를 확인 하기 위해서 기존 주축시스템과 개선 주축시스템의 정적, 동적 특성변화를 비교하였다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.04a
• /
• pp.249-250
• /
• 2002

입자상 물질은 호흡에 의해 폐 깊숙이 침착되어 인체에 피해를 줄 수 있다 같은 질량의 거대 및 미세 입자가 있을 경우, 입자의 크기가 작아짐에 따라 비표면적이 급속히 커지기 때문에 입자가 유해 중금속 성분을 함유하고 있을 경우 그 중금속의 농축 정도가 크다. 지하철 역사는 사람들이 가장 많이 생활하는 지하 공간중의 하나이며, 유동인구가 많아 입자상 물질의 발생이 심한 지역으로 외기에 비해 희석, 화산 공간이 크지 않기 때문에 역사 내 유해 환경 오염 물질의 영향과 관리 대책에 대한 연구가 진행되고 있다. (중략)

• Journal of Radiation Protection and Research
• /
• v.28 no.4
• /
• pp.321-325
• /
• 2003

The effects of AMAD, absorption type, and intake pattern were compared and analysed for the internal dose evaluation of workers who chronically inhale uranium. The committed effective doses$(E_{50})$ based on AMAD, absorption type, and intake pattern were evaluated using 3 monthly lung predicted monitoring data due to a chronic intake of uranium for 5 years. The relative error ranges of $E_{50}$ evaluated with each AMAD$(0.1{\sim}10{\mu}m)\;to\;E_{50}$ evaluated with $5{\mu}m$ AMAD were $-37.0{\sim}49.8%$, and the relative error ranges of En evaluated with Type M to $E_{50}$ evaluated with Type S were $15.9{\sim}56.6%$, and the relative error ranges of $E_{50}$ evaluated with an acute intake to $E_{50}$ evaluated with a chronic intake were $0.55{\sim}4.52%$. Thus AMAD and the absorption type affected the results of $E_{50}$, but the intake pattern didn't really affect the results of $E_{50}$.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.5
• /
• pp.628-635
• /
• 1999

Background : Maximal expiratory flow rate is determined by the size of airway, elastic recoil pressure and the collapsibility of airway in the lung. The obstruction of expiratory flow is one of the major functional impairments of emphysema, which represents COPD. Nevertheless, expiratory narrowing of upper airway may be recruited as a mechanism for minimizing airway collapse, and maintaining lung volume and hyperinflation by an endogenous positive end-expiratory pressure in patients with airflow obstruction. We investigated the physiologic role of trachea in respiration in emphysema. Method : We included 20 patients diagnosed as emphysema by radiologic and physiologic criteria from January to August in 1997 at Seoul Municipal Boramae Hospital. Chest roentgenogram, high resolution computed tomography(HRCT), and pulmonary function tests including arterial blood gas analysis and body plethysmography were taken from each patient. Cross-sectional area of trachea was measured according to the respiratory cycle on the level of aortic arch by HRCT and calibrated with body surface area. We compared this corrected area with such parameters of pulmonary function tests as $PaCO_2$, $PaO_2$, airway resistance, lung compliance and so on. Results : Expiratory cross-sectional area of trachea had significant correlation with $PaCO_2$ (r=-0.61, p<0.05), $PaO_2$ (r=0.6, p<0.05), and minute ventilation (r=0.73, p<0.05), but inspiratory cross-sectional area did not (r=-0.22, p>0.05 with $PaCO_2$, r=0.26, p>0.05 with $PaO_2$, and r=0.44, p>0.05 with minute ventilation). Minute ventilation had significant correlation with tidal volume (r=0.45, p<0.05), but it had no significant correlation with respiratory frequency (r=-0.31, p>0.05). Cross-sectional area of trachea had no significant correlation with other parameters of pulmonary function including $FEV_1$, FVC, $FEV_1$/FVC, peak expiratory flow, residual volume, diffusing capacity, airway resistance, and lung compliance, whether the area was expiratory or inspiratory. Conclusion : Cross-sectional area of trachea narrowed during expiration in emphysema, and its expiratory area had significant correlation with $PaCO_2$, $PaO_2$, and minute ventilation.