• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3761-3767
• /
• 2009

This study was investigated to determine the combustion characteristics, decomposition efficiency, and the flue gas concentrations after combustion in the high temperature reactor($1,250{\sim}1,400^{\circ}C$, 1 atm) for the liquid wastes(waste oil and waste solvent) generated from the industrial complex. The concentration of nitrogen oxide(NOx) is decreased and the synthetic gas is increased when the mass ratio of $O_2$/waste is about 1.53 because the reaction condition was changed to reduction state. And BTEXs(benzene, toluene, ethylbenzene, xylene) are decomposed more than 99.99%. If the highly concentrated liquid waste (waste oil and waste solvent) is treated under the operating conditions suggested by this study, our treatment method for the liquid waste was found to be proper because of the contaminants emission concentration is very low. In addition, the synthetic gas after combustion can be used as an alternative fuel.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.4
• /
• pp.41-48
• /
• 2015

Coffee consumption in Korea has been currently growing every year, and as a result, approximately 0.2 million tons of Spent Coffee Grounds (SCG) are being created every year. SCG, which is waste organic material, is often classified as food waste and an annual amount of 0.27 million ton is discarded while containing moisture and provoking serious environmental issue. Physico-chemical characteristics of SCG were analyzed in this study and medium and long-term growth experiments were conducted in order to evaluate its utilization potential. According to the experiment results, mixing SCG into the previous base material resulted in accelerated germination and growth in the mid-term compared to previous base material alone, despite slower germination or growth in early stage. Especially, it showed lower withering rate and decrease in various symptoms that are caused by nutrition shortage in case of discontinued sprinkling, etc., compared to the previous base material. Hence, while SCG has a feature of hindering early development due to its feature of waste organic material that is rich in nitrogen, its benefit for long-term growth coming its moisturizing ability and supply of organic matter was confirmed in the study. On balance, SCG is believed to be a material that can replace or complement the previous base materials.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.487-490
• /
• 2005

재생 가능한 자원인 동식물성 기름으로부터 만들어지는 수송용 연료 바이오디젤은 낮은 대기오염물질 배출과 $CO_2$ Neutral 특성으로 환경친화적인 연료로 인정올 받으며 전세계적으로 그 생산량이 급격히 증가하고 있다 한국에서는 년간 20만톤의 폐식용유가 배출되며 이중 약 10만톤이 회수 가능한 것으로 추산된다. 폐식용유의 무단 폐기로 인한 수질오염과 폐기물의 자원 재활용 및 에너지 생산 관점에서 폐식용유를 바이오디젤 원료로 사용하는 연구가 많이 진행되었다. 높은 함량의 유리지방산을 함유한 폐식용유를 효율적으로 전이에스테르화(methanolysis) 하기 위해서는 먼저 산 촉매를 이용한 유리지방산의 전환 제거가 필요하다 본 연구에서는 다양한 종류의 강산성 이온교환 수지를 폐식용유의 전처리(pre-esterification)용 고체 산 촉매로 회분식 반응기에서 테스트하였으며 그 결과 Amberlyst-15가 유리지방산의 에스테르화 반응에 가장 적합한 것으로 나타났다. 회분식 반응기에서 도출된 최적 전처리 반응조건을 적용한 200시간 이상의 연속 전처리 운전결과 폐식용유에 함유된 $5\%$의 유리지방산이 $90\%$이상 전환제거 되었다 전처리 반응 후의 폐식용유를 균질계 염기촉매(KOH) 존재하에 메탄올과 전이에스테르화 반응을 시킨 결과 바이오디젤로 불리는 지방산메틸에스테르(Fatty Acid Methyl Ester, FAME)의 생산 수율은 $85\%$로 얻어졌으며 국내 바이오디젤 표준 규격에 따른 연료특성 분석 결과 FAME의 농도 규격을 제외한 모든 항목이 국내 규격을 만족하였다 폐식용유 바이오디젤의 FAME 농도가 $94.3\%$로 국내 규격$96.5\%$에 미달하는 문제는 식물성 원료유로 제조한 고순도 바이오디젤과 혼합 사용하거나 감압 증류 공정을 통해 고농도의 폐식용유 바이오디젤을 제조하여 해결 가능하다. 대전시 신성동 소재의 음식점에서 수거한 폐식용유를 원료로 하여 생산한 바이오디젤의 차량 배출가스 실증 테스트 결과 경유 차량의 주 오염물질인 PM과 Soot 및 기타 오염물질의 배출량은 감소하였으나 NOx의 배출량은 약간 증가하는 것으로 나타났다

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.2
• /
• pp.65-71
• /
• 2018

Paper packs, glass bottles, metal cans, and plastic materials are classified according to packaging material recycling groups that are Extended Producer Responsibility (EPR). In the case of waste paper pack, the compressed cartons are dissociated to separate polyethylene films and other foreign substance, and then these are washed, pulverized and dried to produce toilet paper. Glass bottle for recycling is provided to the bottle manufacturers after the process of collecting the waste glass bottle, removing the foreign substance, sorting by color, crushing, raw materializing process. Waste glass recycling technology of Korea is largely manual, except for removal of metal components and low specific gravity materials. Metal can is classified into iron and aluminum cans through an automatic sorting machine, compressed, and reproduced as iron and aluminum through a blast furnace. In the case of composite plastic material, the selected compressed product is crushed and then recycled through melt molding and refined products are produced through solid fuel manufacturing steps through emulsification and compression molding through pyrolysis. In the recycling process of paper packs, glass bottles, metal cans, and plastic materials, the influx of recycled materials and other substances interferes with the recycling process and increases the recycling cost and time. Therefore, the government needs to improve the legal system which is necessary to use materials and structure that are easy to recycle from the design stage of products or packaging materials.

• Journal of Life Science
• /
• v.16 no.4
• /
• pp.555-560
• /
• 2006

A bacterium producing novel lipolytic enzyme was isolated from house sewage and identified as Acinetobacter sp. BD5 based on physiological characterization and 16S rDNA sequencing. The lipolytic activity of Acinetobacter sp. BD5 was tested using an EL agar medium and CE agar medium supplemented with 1% tributyrin and olive oil, respectively. The formation of a clear zone around the colony was detected by agar medium supplemented with 1% tributyrin and olive oil, respectively and Acinetobacter sp. BD5 formed powder-like zone around the colony on LB agar medium containing Tween 20. The quantitative lipolytic activity was determined by using p-NP butyrate as substrate. Acinetobacter sp. BD5 secreted the lipolytic enzyme during exponential growth phase, reaching a maximum amount after 6 hours of incubation. The lipolytic enzyme was found to be optimally active at $60^{\circ}C$ and retained more than 70% at $70-80^{\circ}C$. It displayed a high degree of activity in a pH of 7.0 to 10.6, with an optimal pH of 9.0.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.2
• /
• pp.120-129
• /
• 2023

Marine structures are subject to damage not only from sea salt but also from the adhesion of marine microorganisms and suspended particles, which cause additional damages. In order to prevent this, periodic coating is employed in the case of vessels to maintain the necessary performance. However, it is true that periodic coating is difficult for concrete or steel support structures, and there is a risk of marine environmental pollution. In this study, authors developed an anti-fouling coating agent using eco-friendly materials that possess hydrophilic cellulose nanofibers and AKD(alkyl ketene dimer). To achieve a homogeneous mixture, the content of cellulose nanofibers was fixed at 1 %, and AKD, distilled water, and waste glass were mixed using a digital mixer and homogenizer. The contact angle of the prepared coated surface was observed to be over 130°, indicating sufficient performance even in a water droplet flow test with a 15° slope, suggesting self-cleaning capability. Furthermore, through the analysis of viscosity characteristics at different temperatures, it was confirmed that the application is feasible at room temperature. Microstructure analysis also verified that the coating agent is uniformly applied to the concrete surface.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.6
• /
• pp.954-964
• /
• 1996

Background : The type of the infiltrating cells in al veolitis may be determined by the chemokines in the lesion. MIP-1 ${\alpha}$, a C-C type chemokine, stimulates proliferation and cytokine secretion from macrophages and induces early neutrophilic and later monocytic inflammation in vi vo. IL-8, a C-X-C type chemokine is known to attract neutrophils and T-lymphocytes. This study is performed to find out the relative role of two different chemokines in diffuse interstitial lung disease. Subject and Method : We measured the secretion of MIP- 1 ${\alpha}$ and IL-8 from alveolar macrophages(AM), and their level in BAL fluid of 26 patients with DILD (10 IPF, 4 collagen disease, 10 sarcoidosis, and 2 hypersensitivity pneumonitis) and 7 normal control. Result: IL-8 secretion was significantly increased in patients with DILD ($8.15{\pm}4.58$ ng/ml) than in normal ($1.10{\pm}0.93$ ng/ml, p=0.0003). Significant correlation was found between IL-8 secretion and total cell number in BAL fluid (r=0.484, p=0.0068), %(r=0.592, p=0.0004) and No. (r=0.516, p=0.0042) of lymphocyte, and % of AM (r=-0.505, 0.0032). MIP- 1 ${\alpha}$ secretion was also increased in DILD ($2.41{\pm}1.45$ ng/ml) compared to control ($0.63{\pm}0.30$ ng/ml, p=0.0031), and showed a tendency of correlation with total cell number (r=0.368, p=0.0456) and No. of alveolar macrophages (r=0.356, p=0.0579) in BAL fluid. The concentration of IL-8 in BAL fluid was significantly increased in the patients with DILD ($40.4{\pm}34.5$ pg/ml) compared to control ($3.90{\pm}2.47$ pg/ml, p=0.0094) and it showed a significant correlation with the total cell number (r=0.484, p=0.0068), %(r=-0.505, p=0.0032) of AM, and % (r=0.592, p=0.0004) and No. (r=0.516, p=0.0042) of lymphocyte in BAL fluid. But there was a no significant difference in MIP- 1 ${\alpha}$ concentration in BAL fluid between normal control group and the patients with DILD. Conclusion : From the above results, we concluded that AM of DILD releases increased amount of both IL-8 and MIP- 1 ${\alpha}$ but IL-8 has better correlation with the type of alveolitis.