• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.5
• /
• pp.410-416
• /
• 2008

합성 및 두부 제조 폐수로부터 혐기 세균 복합체를 이용하여 수소를 생산하였다. 수소생산 혐기 세균 복합체는 하수처리장 농축 소화조에서 발생하는 슬러지를 $90^{\circ}C$에서 20분간 열처리하여 얻었다. 혐기 세균 복합체는 $37^{\circ}C$ 회분식 운전조건에서 1% (w/v) 포도당 함유 PYG (peptone-yeast extract-glucose) 배지로부터 1.15 L-$H_2$/g-균체건조량의 수소를 생산할 수 있었고, 이때 주요 유기산으로 15 mM acetate와 32 mM butyrate가 생성되었다. 같은 발효조건에서 1.4% 전분과 0.07% 환원당을 포함하는 두부 제조 폐수로부터 1.76 L $H_2$/L-두부제조폐수의 수소를 발생하였다. 이와 같은 결과로 부터 포도당과 두부 제조 폐수로부터 혐기세균 복합체에 의한 수소생산 효율은 각각 1.9과 0.9 mol $H_2$/mol 포도당을 나타내었다. 반연속운전(HRT, 12 시간)시 합성폐수를 이용하여 60일 이상 안정적으로 수소를 생산할 수 있었고, 이 때 혐기 세균 복합체는 1.3-2.0 L $H_2$/L-배양액을 발생하였다. PCR-DGGE(polymer chain reaction-denaturing gradient gel electrophoresis) 분석결과, 반응기 내 세균 복합체의 주요 미생물은 Clostridium 종이었다. 본 연구는 적절한 열처리를 통해 혐기 소화조 슬러지로부터 고활성 수소생산 세균 복합체를 얻을 수 있으며, 이들 세균 복합체를 이용하여 합성 및 두부제조 폐수로부터 효율적인 수소생산이 가능하다는 것을 나타내고 있다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.275-284
• /
• 1992

A generated problem in treated highly concentrated organic wastewater by activated sludge process is the limitation of biomass concentration and oxygen transfer capability in aeration tank. To overcome the limitation, the deep shaft activated sludge process which has high oxygen transfer capability was applied to the wastewater treatment process. This paper investigated the characteristics of liquid circulation, oxygen transfer and biological treatment of paper mill wastewater by the deep shaft activated sludge process. From the obtained results, it was found that the oxygen transfer capability in the deep shaft system was much greater than those in the conventional aeration systems and almost tantamount to the pure oxygen system. The deep shaft system could treat highly concentrated organic wastewater by higher biomass concentration and organic loading rate.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.349-353
• /
• 1999

A study was carried out to see the effects of phenol on the biological degradation of a wastewater containing 2,4-dichlorophenol and 2,4-dinitrophenol and the biodegradation kinetic coefficients of Eckenfelder's modified model for the activated sludge process. The system containing base mix (BM) which was formulated with essential energy sources and nutrients was run down and washed out when 2,4-dichlorophenol and 2,4-dinitrophenol was introduced into the base mix unit without acclimation to phenol. Whereas for the system acclimated to phenol, the treatment efficiency was 91.9% in terms of $BOD_5$ and treatability for each chemical of phenol, 2,4-dichlorophenol, and 2,4-dinitrophenol was 99.8%, 43.3% and 62.5% based on concentration, respectively. Additional BM was added into the combined unit containing phenol, 2,4-dichlorophenol, 2,4-dinitrophenol so that the better treatment efficiency was achieved for each compound. The biokinetic coefficient of Eckenfelder's modified model without phenol acclimation was not estimated because the system did not reach the steady state. Thc coefficient for the phenol acclimation was 12.44 /day, however it was changed as 46.91 /day in addition of both of phenol acclimation and 47 mg/l of BM. The results presented above could be useful for the process design and further study in the field of biodegradation of benzene derivatives.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.7
• /
• pp.738-745
• /
• 2006

In this research, the decolorization mechanisms of dye wastewater were divided into two pathways, one was physicochemical sorption to biomass flocs and the other was biological removal by microbial metabolisms. Batch tests were conducted to examine the reaction conditions, anaerobic and aerobic conditions, types and dose of cosubstrates, and to confirm the mechanisms of decolorization through the biosorption tests using the activated sludge and the autoclaved deactivated sludge. From the tests, the decolorization efficiencies of dye wastewater were 102 ${\Delta}$unit/g MLSS under the aerobic condition and 123 ${\Delta}$unit/g MLSS under the anaerobic condition, and organic removals were 82 $mg{\Delta}$COD/gMLSS and 75 $mg{\Delta}$COD/gMLSS respectively. Acetate was the more efficient cosubstrate than the domestic wastewater in the decolorization step. In addition the removal of colors and organics was increased with cosubstrates dosage. And $20.3{\sim}37.3$ ${\Delta}$unit/g MLSS was removed by the autoclaved sludge and $102.0{\sim}159.0$ ${\Delta}$unit/g MLSS by the activated sludge. The physicochemical sorption was dominant in the beginning of biosorption tests, and the biological decolorization was increased with a cosubstrate in the course of time.

• Korean Chemical Engineering Research
• /
• v.48 no.1
• /
• pp.103-109
• /
• 2010

Anaerobic digestion has been widely used for the treatment of sludge, which is generated from the municipal and industrial wastewater treatment, for its volume reduction and methane production. Many researches on sludge pre-treatment have been carried out in order to enhance the performance of anaerobic digestion by increasing the hydrolysis of sludge which is the rate limiting step of anaerobic digestion. In this study, the effect of pre-treatment on sludge hydrolysis(solubilization), methane production and sludge reduction by anaerobic digestion after thermal, ultrasonic, and thermal-alkali sludge treatment were compared. Thermal-alkali treatment showed 67 and 70% solubilization with municipal and industrial wastewater sludge, respectively, while ultrasonic treatment and thermal treatment gave similar solubilization efficiency of 40% or more. Methane content of the anaerobic digestion gas reached 45~70% and pretreated sludge gave higher methane content than the control sludge. Methane production of thermal, ultrasonic, and thermal-alkali pre-treatment gave 2.6, 2.7, 3.5 times of municipal control sludge and 3.5, 4.1, 4.2 times of industrial control sludge, respectively. Sludge reduction of pre-treated sludge after anaerobic digestion gave 5~19% point higher than that of control sludge, and thermal-alkali treatment showed higher reduction efficiency than thermal and ultrasonic treatment. The results proved that pre-treatment contributed significantly not only for the methane production but also for the cost reduction of sludge treatment and disposal, and thermal-alkali treatment gave the best performance for the sludge treatment.

• Resources Recycling
• /
• v.13 no.4
• /
• pp.17-22
• /
• 2004

This study was focused on the treatment of thickened sewage sludge. General bacteria and E. coli were disinfected over 99％ and organic compounds were decomposed after irradiation. It was suggested that this process can be an alternative for digestion Process. The moisture content in sludge was decreased over 10％ (w/w) and the coagulation of sludge particles was enhanced by irradiation at the dose of 15 kGy and addition of sea waste resource (star-fish) as a dewatering aid.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.2
• /
• pp.179-186
• /
• 2006

Chemical wastes are generated from nuclear facilities and R&D laboratories, but the uranium concentration in the final dried cake is evaluated into 11.2 Bq/g, which exceeds the exemption level of 10 Bq/g for each U isotopes, so the cake is categorized into a radioactive waste. Acid dissolution was applied to extract uranium from the waste sludge, and uranium adsorption on the dissolved solution was experimented by using IRN-77 and Diphosil bead. A large amount of resin was required to get above 80% of uranium removal, which was found to be due to a large amount of metal ions simultaneously dissolved from the precipitates with uranium. As an alternative method, acid dissolution is applied to the dewatered wet cake of the sludge, and the natural evaporation method is adopted for the dissolved solution. The uranium concentration of the dissolved solution was estimated to be 6.97E-01 Bq/ml, and the specific activity of the final waste sheets is evaluated to be 4.3 Bq/g. These results lead to the suggestion that the application of acid dissolution to the wet cake and the natural evaporation for the dissolved solution is an effective treatment method for chemical wastes containing uranium.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.533-536
• /
• 2001

In this study, biological activity in activated sludge process for pharmaceutical wastewater was analyzed by using respirometer. For various amounts of BOD loadings. oxygen uptake rate was measured and kinetic paramelers were evaluated. By repetition of experiments, optimal operating conditions (eg. MLSS. BOD loadings. oxygen concentration, etc) were decided for the enhancement of activated sludge process.

• Resources Recycling
• /
• v.8 no.4
• /
• pp.39-44
• /
• 1999

Nightsoil and brewery sludges usually contain a high concentration of organic matters. A composting study using reactors was carried out for the recycle of brewery wastewater sludge and nightsoil treatment sludge, which have been landfilled. A good composting process was obtained with a sludge mixing ratio of 1:1 and injual pH had no effect on temperature increase related to microbial activity. The injtial C/N ratio at approximarely 15 decreased to 13 without the increase in pH.. It was found that agitation of one time a week provided the most effective composting process.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.8
• /
• pp.578-582
• /
• 2011

Aerobic digestion of organic sludge generates stabilized slurry which could be used as a nitrogen-rich liquid fertilizer. In this study, the effects of air supply rate and eggshell addition on the sludge fertilizer efficiency were examined. Sludge from a wastewater treatment plant in a food industry was fed to a lab-scale aerobic digester, and the fertilizer efficiency was assessed by the growth of cucumber. Increase of air supply rate up to 200 mL/L/min enhanced the fertilizer efficiency as well as the nitrification efficiency. The addition of eggshell, a potassium-rich leftover, in fertilizer application was also beneficial to the cucumber growth. A proper control of air supply rate and the use of an inexpensive additive would guarantee the quality of sludge liquid fertilizer.