• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.890-893
• /
• 2002

This study is focused to predict the behavior of Al foam with closed-cell structure during the 3 point bending test and the upsetting test according to aspect ratio. We calculated characters of aluminum foams with closed-cell structure and took the simulation. The effects on the aspect ratio of the cell was investigated parametrically. The analysis was carried out on two models, First, the bending test in elasticity of the rectangular beam, and Second, the upsetting test in plasticity of the circular cylinder. In the analysis, the deformation of the beam and the cylinder was influenced by the aspect ratio of the cell. Further, We assumed that the geometry of feared aluminum cell change the stress and strain in the test.

• Korean Journal of Environmental Biology
• /
• v.39 no.1
• /
• pp.88-99
• /
• 2021

In this study, a land-based marine closed mesocosm (LMCM) experiment was performed to objectively assess the initial stability of an artificial ecosystem experiment against biological and non-biological factors when evaluating ecosystem risk assessment. Changes in the CV (coefficient of value) amplitude were used as data to analyze the stability of the experimental system. The CV of the experimental variables in the LMCM groups (200, 400, 600, and 1,000 L) was maintained within the range of 20-30% for the abiotic variables in this study. However, the difference in CV amplitude in biological factors such as chlorophyll-a, phytoplankton, and zooplankton was high in the 600 L and 1,000 L LMCM groups. This result was interpreted as occurring due to the lack of control over biological variables at the beginning of the experiment. In addition, according to the ANOVA results, significant differences were found in biological contents such as COD (chemical oxygen demand), chlorophyll-a, phosphate, and zooplankton in the CV values between the LMCM groups(p<0.05). In this study, the stabilization of biological variables was necessary to to control and maintain the rate of changes in initial biological variables except for controllable water quality and nutrients. However, given the complexity of the eco-physiological activities of large-scale LMCMs and organisms in the experimental group, it was difficult to do. In conclusion, artificial ecosystem experiments as a scientific tool can distinguish biological and non-biological factors and compare and analyze clear endpoints. Therefore, it is deemed necessary to establish research objectives, select content that can maintain stability, and introduce standardized analysis techniques that can objectively interpret the experimental results.

• 한국IT서비스학회:학술대회논문집
• /
• 2008.05a
• /
• pp.272-277
• /
• 2008

무선통신망의 망고도화로 3세대 이동통신 서비스가 개시됨에 따라 소비자들은 다양한 서비스와 콘텐츠를 제공받을 수 있게 되었다. 현재의 모바일 무선인터넷은 네트워크를 소유하고 있는 이동통신사들이 사실상 전권을 행사하고 있어 폐쇄적 성격이 짙다. 하지만, 작년 Google이 개방형 모바일 플랫폼 "안드로이드"를 공개한데 이어, 최근 LGT의 무선인터넷서비스 "OZ"의 런칭으로 무선인터넷 활성화에 대한 기대감이 높아지고 있다. 기존의 무선인터넷 산업에 대한 연구는 선형적인 가치사슬에 기반하여 해석되었기 때문에, 복잡한 네트워크로 진화해가는 해당 산업에 대한 명확한 분석을 할 수가 없었다. 따라서, 본 연구에서는 가치네트워크 개념을 도입하여 모바일 플랫폼의 개방이 이동통신 가치네트워크에 미치는 영향에 대하여 연구한다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.2
• /
• pp.1-9
• /
• 2015

In this paper, the RC column-based joint connection part carry out loading test by reinforced hollow or extended Base Plate in order to confirm that RC joint punching shear reinforcement effect of applying the Base Plate. Base Plate thickness, extension length, size, and type as the variable, Base Plate suitable for the stress distribution and shape and dimensions confirmed through experiment and then reinforcing effect was analyzed. Experimentally, vertical load transmitted to the Base Plate from column to foundation is effective to stress distribution and then, type of hollow reinforcement more efficient than a closed. Through experiment, improve performance and ductility due to reinforcement and relative to the thickness of the existing foundation reduced even showed better performance than the existing. The behavior of the reinforced specimens be able to induce from brittle to ductile. Experiment on loading to destroy performed the pattern of cracks, destruction aspect before and after reinforcement.

• Composites Research
• /
• v.17 no.2
• /
• pp.34-39
• /
• 2004

In this paper, a modified and representative unit cell model was employed to study the tensile behaviour of closed-cell metallic foams with varying spatial density distribution as well as material imperfections. The density variation was assumed to follow a statistical probability distribution of the Gaussian type. A multiple cell finite element model, utilising the modified unit cell, was developed. The model exhibits deformation patterns similar to those observed in tensile testing. The nominal stress-strain curve obtained from quasistatic tensile of the foam was compared with experimental findings and was found to be in good agreement in the scheme of maximum strength only if the appropriate density distribution and volume fraction of internal imperfections are taken into account. Moreover, maximum tensile strength of the aluminium foam was found to be more sensitive to the volume fraction of imperfection than standard deviation of the density.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.99-102
• /
• 2005

An approach to adaptive finite element analysis of three-dimensional forging processes is presented in this paper. In the approach, an optimal tetrahedral element generation technique is employed and the mesh density is specified by the combination of the normalized effective strain and the normalized effective strain rate. The approach is applied to computer simulation of an enclosed die forging process of a bevel gear and its results are compared with experiments.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.3
• /
• pp.79-84
• /
• 1999

The existing EMTP(Electromagnetic Transients Program) is writted by FORTRAN-77, has a closed architecture and uses a large number of code lines to satisfy requirements ranging from low level data manipulation to the actual solution mathematics which eventually become diluted and almost impossible to visualize. Thus has a difficulty in the development and maintenenace of its program module. This paper proposes a new design idea suitable (or a re-development of EMTP using the MATLAB and VISUAL-C++, which presents the development of the new EMTP package is operated in the window environment. The package has the GUI(Graphic User Interface) ability, and the MATLAB computation engine for an analysis of a transient state in an electric circuit.

• Spatial Information Research
• /
• v.13 no.1 s.32
• /
• pp.43-53
• /
• 2005

This paper presents tile modeling of non-point source pollutants runoff and its desirable water environmental management to closed waterbody. To obtain spatially distributed environmental information, fro have used contour data to extract stream channels automatically and to divide networks of watershed. A Quasi Digital Elevation Model (DEM) has been developed, validated, and adopted to estimate the runoff of total nitrogen pollutant from watershed. The GIS-linked model can be applied effectively to the non-point source pollutants from watersheds considering water conditions in receiving waters. It will be useful to manage water environment in receiving waters.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.4 no.4
• /
• pp.208-218
• /
• 1992

Analytic solutions for the gradient of surface elevation and vertical profiles of velocity driven by the wind stress in the one-dimensional rectangular basin were obtained under the assumption of steady-state. The approach treats the bottom frictional stress $\tau$$_{b}$ as known and includes vertically varying eddy viscosity $textsc{k}$$_{M}$, which is constant, linear and quadratic of water depth. When the $\tau$$_{b}$ is param-terized with surface stress, depth averaged velocity and bottom velocity, the result shows the relation of the no-slip bottom velocity condition and the bottom frictional stress $\tau$$_{b}$. The results of a mode splitted, (x-$\sigma$) coordinate, numerical model were compared with the derived analytic solutions. The comparison was made for the case such that $textsc{k}$$_{M}$ is the constant, linear and quadratic function of water depth. In the case of constant $textsc{k}$$_{M}$, the gradient of surface elevation and vertical profiles of velocity are discussed for a uniform depth, a mild slope and a relatively steep slope. When $textsc{k}$$_{M}$ is a linear and quadratic function of water depth, the vertical structures of velocities are discussed for various $\tau$$_{b}$. The result of the comparison shows that the vertical structure of velocities depends not only on the value of $textsc{k}$$_{M}$ but also on the profile of $textsc{k}$$_{M}$ and bottom stress $\tau$$_{b}$. Model results were in a good agreement with the analytic solutions considered in this study.his study.y.his study.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.62-62
• /
• 2011

한강하구지역의 강화해협은 한강, 임진강과 예성강의 강물이 흘러들어오는 하구형 수로로서 폭이 좁고, 유속이 매우 빠른 특성을 갖는다. 또한 조류(潮流)의 영향을 강하게 받아 상당량의 유량을 경기만으로 내보내고, 한강의 상류로부터 유입되는 상당량의 물질이 하구로 운반되어 침전하여 쌓이거나 하류의 외해로 배출하는 역할을 한다. 본 연구에서는 한강하류부에 위치한 강화해협의 유 무에 따른 한강과 임진강의 흐름특성 변화를 분석하였다. 수치모의를 위해 복잡한 하구지역의 물의 흐름해석이 가능한 일차원적인 모델링 도구인 MIKE 11 모형을 이용하여 정류 및 부정류 해석을 실시하였다. 상류경계조건은 홍수 시 방류량이 크게 증가하는 홍수기 유량과 조위의 영향을 많이 받는 평수기 시 유량으로 설정하였고, 하류경계조건은 평수기를 비롯하여 홍수기에도 임진강과 한강의 유량에 영향을 미치는 서해 조위로 설정하였다. 강화해협의 폐쇄에 따른 수위 변화의 영향은 홍수기 시 실제 강우 사상을 모의 하였을 때 최대 8.21% 수위가 상승하였으며, 200년 빈도 계획홍수량을 모의한 결과로는 정류 해석의 경우 최대 8.25%의 변화율을 보였고, 부정류 해석의 경우 최대 13.08%의 변화율을 보였다. 평수기는 창조기에 수위 변화가 적었던 반면 낙조기에는 창조기에 비해 수위 변동이 심하게 일어나는 것으로 나타났다. 추후 강화해협 뿐만 아니라 해양생태계의 중요한 가치를 지니고 있는 한강하구의 다른 수로에 의한 영향을 분석함으로써 수로의 중요성을 평가하고, 2차원 수치해석 등을 통한 다양한 분석을 실행하여, 홍수 및 해양환경 훼손으로부터 하구 환경을 보호하는 보다 정량적인 대응체계가 정립되어야할 것으로 사료된다.