• International Journal of Highway Engineering
• /
• v.4 no.1 s.11
• /
• pp.161-170
• /
• 2002

This study is a fundamental research for recycling waste polyethylene film(WPF) in asphalt concrete for roadway pavement. The objective of this study is to develop technology of making waste polyethylene asphalt mixture and evaluate properties of the asphalt concrete containing WPF. Asphalt concrete for surface course of pavement was produced through an appropriate mix-design using dense-graded and gap-graded aggregates. Marshall mix design, indirect tensile strength test, wheel tracking test and tensile fatigue test were performed. Test result showed that some WPF asphalt mixtures had a high tensile property and good resistances against rutting and fatigue cracking, compared with normal asphalt mixture.

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.4
• /
• pp.5-16
• /
• 2003

The aggregate out of waste polyethylene was made in order to recycle waste polyethylene wasted in the country side. Many physical and mechanical experiments which include leaching test, specific gravity test, compaction test, LA abrasion test, large-scaled shear test, and permeability test were performed for the waste polyethylene aggregate. The thermal conductivity test, unfrozen water content test and frost heave test were also performed. The temperature distribution for both gravels and waste polyethylene aggregate, which were constructed in the frost heave layer in the field, was measured in winter season of continuous 2 years and compared.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.12
• /
• pp.5-11
• /
• 2017

The 19 mm-sized aggregate was produced by melting vinyl waste (waste polyethylene film) generated from vinyl greenhouses in rural areas. It was mixed with As'cone at various weight ratios, and then insulation effect test, tension test after repeated freezing and thawing, ice pull-out strength test and field density test were conducted for the mixtures. These results demonstrated that as the mixing ratio of polyethylene aggregate increased, the insulation effect increased, due to the many pore spaces that existed in the polyethylene aggregate. After repeatedly freezing and thawing As'cone, the tensile strength significantly increased at 2.5% of the polyethylene aggregate content rather than 0% of polyethylene aggregate content but it also slightly decreased at 5% and 10% of polyethylene aggregate content in comparison to 2.5% of its polyethylene aggregate content. As'cone added with polyethylene aggregate by 2.5% resulted in lower ice pull-out strength than that of normal As'cone. As a result of the porosity test for the samples taken at the site, porosity of the As'cone, which added polyethylene aggregate, was smaller than that of the general As'cone.

• Clean Technology
• /
• v.25 no.4
• /
• pp.289-295
• /
• 2019

Though the usage of vinyls and plastics produced from fossil fuels has been increasing in the world, the eco-friendly domestic disposal or recycling of waste vinyls has to be executed because the migration or importation of waste vinyls or waste plastics are globally prohibited. Even though the eco-friendly domestic disposal or recycling of waste vinyls and waste plastics should be developed, promising eco-friendly recycling methods are few because there are extraneous substances in waste vinyls and waste plastics. Also, conventional incineration and landfill methods result in secondary contamination and then increase disposal costs. Therefore, the selective elimination of extraneous substances or other materials included in waste vinyls and waste plastics could make valuable recycling or reuse possible. In particular, the novel hybrid process in which crushing and screening are simultaneously conducted in a rotary kiln type reactor can domestically maximize the material recycling or reuse. In this study, the feasibility study for a crushing/screening hybrid process developed in Korea was performed and evaluated in case of thermal recycling (TR) and material recycling (MR). The effect of various subsidies on economic efficiency was especially evaluated by means of domestic recycling plans. The incentive revenues from waste vinyl recycling and the incineration share of waste vinyls affected the net present values and internal rate of returns of the hybrid process.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2003.10a
• /
• pp.151-151
• /
• 2003

토양에 방치된 농업용 폐비닐은 거의 분해가 되지 않으며, 수분과 공기의 유통을 차단하고 토양 내 미생물들의 흐름을 막아 토양을 더욱 황폐화시키게 된다. 불법적인 소각 때는 산불의 위험에다 다이옥신, 염소 및 염화수소가스 등을 배출해 대기오염을 유발시킨다. 폐비닐을 열분해과정으로 처리하여 아주 작은 입자로 미분쇄하고 겔상태로 용융된 원료물질속으로 완전히 균일하게 혼합하여 골재로 활용하는 과정에서 가스상과 액상의 여러 가지 중간생성물질이 발생하게 되며, 농약의 살포에 의한 잔류농약 둥 인체에 유해가능한 요소들이 있을 수 있다. 본 연구에서는 개발공정이나 제품에서 인체에 영향을 미칠 수 있는 물질에 대하여 유해성을 평가하고 용응 겔 및 가스와 오일에 함유된 화학성분을 분석하였기에 보고하고자 한다 시험동물의 혈액생화학적 검사에서는 농업용 폐비닐물질 및 열분해 파생물질의 혈청 Cholesterol, 혈청 Alanine aminotranseferse와 Aspartate aminotransferse, Albumin 수치, LDH, Glucose, Uric acid, A/C 비 등의 생화학적 활성도를 측정한 결과들에서는 농업용 폐비닐물질을 투여한 시험군에서 나타난 결과와 비교하여 열분해 파생물질을 투여한 시험군에서 나타난 결과가 감소된 통계결과를 보였다. 이 결과들은 농업용 폐비닐물질을 투여한 시험군보다 열분해 파생물질을 투여한 시험군의 외부독성물질 투여에 의한 생체독성의 영향과 생체에 가해진 스트레스강도가 작았음을 의미하는 것이다. 잔류농약분석에서는 시료로부터 농약을 추출하는 용매추출과정, 시료추출물 중 공존하는 방해성분을 제거하는 정제과정, 폐비닐물질 및 열분해 파생물질 성분을 100mg/kg 이상군의 투여 후 시험동물의 부검시 모든 투여군에서 독성소견이 인정되지 않았다. 이와 같은 결과로 열분해 및 연소과정에서 발생하는 파생물질의 분석결과를 응용하여 대기오염을 방지하고 인체 유해물질을 차단하는 공해 방지 설계의 기초자료를 제안하고자 한다.

• Resources Recycling
• /
• v.30 no.1
• /
• pp.53-59
• /
• 2021

Waste vinyl generated from household waste has been used as a solid refuse fuel (SRF) due to the presence of impurities such as soil, metal, and glass; however, the amount of SRF used has been decreasing owing to recent environmental problems, thereby necessitating the need for recycling. In this study, the mixed recycled raw material produced from household waste vinyl and polyethylene (PE) single recycled raw material produced from agricultural waste vinyl were examined. Raw material analysis revealed that waste vinyl was mainly composed of polyethylene, and approximately 2% of ash remained in the mixed recycled raw material, whereas no ash was found in the PE single recycled raw material. In addition, the analysis of tensile strength according to the mixing ratio of the two recycled raw materials revealed that the highest tensile strength was approximately 16 MPa under the heat treatment temperature of 200 ℃, compression pressure of 30 MPa, and a mixing ratio of 3:7 (mixed:PE single). In addition, the highest bending strength was approximately 39 MPa under the heat treatment temperature of 200 ℃, compression pressure of 30 MPa, and a mixing ratio of 3:7 (mixed:PE single). Therefore, the possibility of recycling waste vinyl was suggested by investigating the change in strength characteristics according to the mixing ratio of the recycled raw materials.

• Resources Recycling
• /
• v.8 no.3
• /
• pp.3-8
• /
• 1999

An air-washer was developed in order to remove the soil on the films collected from agricultural use, The washed films were subjected to TGA analysis to measure the residual soil content and DSC analysis to evaluate composition as well as compositional ratro, Mechanical properties of washed films were measured via tensile test ,md the properties of washed films were compared with those of neat resin blend. Major component of air washed films was polyethylene, and compositional ratio was 10:6:3:1 (HDPE:LLDPE:LDPE:EVA). 30 min air-washed films showed 2.1 % of residual soil content, while the water washed films had 1.5%. Tensile properties of washed (air and water) films were almost same as those of neat resin mixture.

• Resources Recycling
• /
• v.33 no.1
• /
• pp.48-57
• /
• 2024

This study aimed to improve utilization of the Class C vinyl waste generated in rural areas based on a preliminary investigation on the use of eco-powder, generated through pyrolysis, as a raw material for plastic. The efficiency of pre-processing treatments in controlling ash content of the generated eco-powder and its effect on the basic properties of manufactured plastic were evaluated. The basic properties included ash content of the compressed eco-powder at different levels of ash content, impact strength, flexural strength, and tensile strength. The experimental results confirmed that pre-processing improved the separation efficiency of soil particles and vinyl waste through physical impact. The eco-powder with ash content of less than or equal to 26% was found to satisfy the target performance during impact strength, flexural strength, and tensile strength evaluation. Thus, it was confirmed that the Class C vinyl waste, having low utilization and recovery rates, could be effectively utilized as a plastic raw material after optimum thermal treatment and physical processing using the eco-powder.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.07a
• /
• pp.187-192
• /
• 2003

우리나라의 밭작물 재배 시 잡초발생의 억제, 토양온도 및 수분 유지, 수량증수 등의 목적으로 약 274천㏊가 비닐피복재배를 하고 있으나, 한국자원재생공사에 의하면 2000년도 폐비닐 발생량중 약 48%만이 회수되고 있어 폐비닐에 의해 농토와 주변환경의 오염이 심각한 지경에 이르고 있다. 또한 폐비닐의 수거작업은 인력에 의존하고 있어 많은 노력이 들기 때문에 환경오염을 줄이고 수거노력 절감을 위해 기계화가 절실히 요구되고 있다. (중략)

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.218-218
• /
• 2021

최근 환경 문제과 관련하여 건설 분야에서 발생하는 환경적인 부담을 줄이고자 다양한 재활용 소재들에 대한 연구에 대한 관심이 증가하고 있다. 특히 폐기물 중 생활계에서 발생하는 폐플라스틱은 '쓰레기 대란'이라는 사회적 문제로 대두된 사례가 있다. 생활계에서 발생하는 폐비닐은 다양한 조성으로 이루어져 재활용 대상에서 제외되기 때문에 매립 또는 소각되는 플라스틱의 양을 줄이고 재활용율을 늘릴 수 있는 연구가 필요하다. 본 연구는 생활계에서 발생하는 폐비닐을 융용시켜 무기첨가제 등을 한 복합 Alloy를 생산한다. 또한 재생이 가능한 복합 Alloy를 압출 또는 사출 과정을 통해 테트라포드의 형태를 만들 수 있는 Preform으로 가공하는 공정연구 하였으며 이러한 Preform을 해안 및 항만에서 사용되는 콘크리트 피복재에 적용하였을 때 플라스틱 소재와 콘크리트 소재의 비중의 차이로 인해 발생하는 안정성을 정량적으로 평가하는 수리모형 실험를 수행하였다.