• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.6
• /
• pp.659-665
• /
• 2008

This study is about zeolite synthesis from the sewage sludge incinerator fly ash of "S" sewage treatment center located in Seoul. For this purpose, the properties of raw fly ash as starting material, the hydrothermal conditions for zeolite synthesis and the environmental applicabilities of synthesized zeolites were examined. Fly ash from sewage sludge incinerator has large quantities of SiO$_2$ and Al$_2$O$_3$ and their contents are 42.8 wt.% and 21.2 wt.% respectively. So fly ash is considered to be possible starting material for zeolite synthesis. The results from leaching test of fly ash showed that the concentration of hazardous metals were very low as compared with the Korea leaching standard of the Waste Management Law. But the concentration from total recoverable test of fly ash were higher than the fertilizer standard of Fertilizer Management Law. Major zeolite products synthesized by hydrothermal reaction are analcime in teflon vessel and zeolite P1 in borosilicate flask. Optimum conditions for the synthesis of analcime were 1 N of NaOH concentration, 16 hour of reaction time and 135$^{\circ}C$ of reaction temperature. For the zeolite P1 formation, the proper conditions were demonstrated to be 5 N of NaOH concentration, 16 hour reaction time and 130$^{\circ}C$ of reaction temperature in this study. Hazardous metal contents in the analcime product are similar with those in raw fly ash. In case of the zeolite P1, the contents are reduced to nearly a half. Raw fly ash and the analcime product showed NH$_4{^+}$ ion exchange capacity of 0$\sim$1.0 mg of NH$_4{^+}$g$^{-1}$ and 3.0$\sim$7.4 mg of NH$_4{^+}$g$^{-1}$, respectively. However, the zeolite P1 product reached exchange capacity to 14.6$\sim$17.8 mg of NH$_4{^+}$g$^{-1}$. This values are in the range of those of natural clinoptilolite and phillipsite. From this point of view, zeolite synthesis from sewage treatment sludge incinerator fly ash is a good alternative for solid waste recycling.

• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.650-658
• /
• 2006

The recycling of TDA from solid waste of TDI plant(TDI-R) by near-critical hydrolysis reaction had been studied by means of a statistical design of experiment. The main and interaction effects of process variables had been defined from the experiments in a batch reactor and the correlation equation with process variables for TDA yield had been obtained from the experiments in a continuous pilot plant. It was confirmed that the effects of reaction temperature, catalyst type and concentration, and the weight ratio of water to TDI-R(WR) on TDA yield were significant. TDA yield decreased with increases in reaction temperature and catalyst concentration, and increased with an increase in WR. As a catalyst, NaOH was more effective than $Na_2CO_3$ for TDA yield. The interaction effects between catalyst concentration and temperature, WR and temperature, catalyst type and reaction time on TDA yield had been defined as significant. Although the effect of catalyst concentration on TDA yield at $300^{\circ}C$ as subcritical water was insignificant, the TDA yield decreased with increasing catalyst concentration at $400^{\circ}C$ as supercritical water. On the other hand, the yield increased with an increase in WR at $300^{\circ}C$ but showed negligible effect with WR at $400^{\circ}C$. The optimization of process variables for TDA yield has been explored with a pilot plant for scale-up. The catalyst concentration and WR were selected as process variables with respect to economic feasibility and efficiency. The effects of process variables on TDA yield had been explored by means of central composite design. The TDA yield increased with an increase in catalyst concentration. It showed maximum value at below 2.5 of WR and then decreased with an increase in WR. However, the ratio at which the TDA yield showed a maximum value increased with increasing catalyst concentration. The correlation equation of a quadratic model with catalyst concentration and WR had been obtained by the regression analysis of experimental results in a pilot plant.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.3
• /
• pp.115-122
• /
• 2019

Electric arc furnace dust (EAFD), which is a dust waste generated in the steel manufacturing process, contains heavy metals. Recently, researches of recycling a large amount of valuable metals such as zinc and iron in EAFD are being actively carried out. In this study, EAFD is used as a substitute for cobalt in blue ceramic pigments without any pretreatment. Then, the synthesized blue ceramic pigment using EAFD was micronized and formulated as a ceramic ink for inkjet printer. The particle size distribution, crystal structure and color characteristics during the micronization process were investigated for the development of ceramic ink. $Co_{0.75}Zn(EAFD)_{0.25}Al_2O_4$ ceramic pigments showed excellent blue coloric properties and monomodal distribution through micronization process. The average particle size of $Co_{0.75}Zn(EAFD)_{0.25}Al_2O_4$ ceramic pigments after 3 hours of milling was $0.271{\mu}m$, which is smaller than $0.303{\mu}m$, which is the average particle size of $CoAl_2O_4$ ceramic pigments without EAFD after 5 hours of milling. Especially, it was confirmed that $Co_{0.75}Zn(EAFD)_{0.25}Al_2O_4$ ceramic pigments showed a color difference (${\Delta}E{^*}_{ab}$) value of 5.67, which smaller than ${\Delta}E{^*}_{ab}$ value of $CoAl_2O_4$ during micronization. These results show that EAFD can be used as a raw material for a blue ceramic pigment by replacing expensive cobalt without any pretreatment.

• Food Science and Industry
• /
• v.55 no.2
• /
• pp.188-202
• /
• 2022

In the insect industry, as the scope of application of insects is expanded from pet insects and natural enemies to feed, edible and medicinal insects, the demand for quality control of insect raw materials is increasing, and interest in securing the safety of insect products is increasing. In the process of expanding the industrial scale, controlling the temperature and humidity and air quality in the insect breeding room and preventing the spread of pathogens and other pollutants are important success factors. It requires a controlled environment under the operating system. European commercial insect breeding facilities have attracted considerable investor interest, and insect companies are building large-scale production facilities, which became possible after the EU approved the use of insect protein as feedstock for fish farming in July 2017. Other fields, such as food and medicine, have also accelerated the application of cutting-edge technology. In the future, the global insect industry will purchase eggs or small larvae from suppliers and a system that focuses on the larval fattening, i.e., production raw material, until the insects mature, and a system that handles the entire production process from egg laying, harvesting, and initial pre-treatment of larvae., increasingly subdivided into large-scale production systems that cover all stages of insect larvae production and further processing steps such as milling, fat removal and protein or fat fractionation. In Korea, research and development of insect smart factory farms using artificial intelligence and ICT is accelerating, so insects can be used as carbon-free materials in secondary industries such as natural plastics or natural molding materials as well as existing feed and food. A Korean-style customized breeding system for shortening the breeding period or enhancing functionality is expected to be developed soon.

• Korean Journal of Mineralogy and Petrology
• /
• v.37 no.1
• /
• pp.1-11
• /
• 2024

World stone production in 2021 stood at 162.5 million tons, up by 7.5 million tons, or 4.8 percent, compared to the previous year when the production came in at 155 million tons. Six top countries with the most of stone production were China, India, Turkey, Brazil, Iran and Italy and these six countries accounted for 72.8 percent of total production in the world. Stone exports stood at $21.68 billion in 2021, up by $2.3 billion from the previous year. Exports of raw materials and processed stones stood at 54.4 million tons, up by 2.98 million tons from the previous year. In terms of aggregate exports, exports of natural stones increased by $2.3 billion to $21.7 billion while exports of artificial stones rose $2.6 billion to $13.6 billion in 2021 compared to the previous year. The average price of stone (Code: 68.02) was up by $65.2 per ton to $794.82. The price of board, processed stone, an ingredient for building materials, increased by $3.52 per square meter to $42.96 per square meter. Recycling was always the problem as the volume of the total quarry was 333.5 million tons, of which only 28.8 percent were finished products and the remaining 71.2 percent were waste generated from stone extraction and processing. Korea's stone exports stood at $1.97 million in 2021, down 38.3 percent on year, while imports were up 8.6 percent to $758.9 million. Stone exports are expected to grow to 66.1 million tons in 2025, while usage is expected to reach 108.92 million tons, or 2 billion square meters.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.4
• /
• pp.37-45
• /
• 2006

Recently, wood-framed houses has been built in the Korea for pension. Wood is good material for human healthy, while the construction lumbers are treated with preservative such as CCA (chromated copper arsenate), which contain some toxic elements for human body. However, if the waste woody biomass treated with various heavy metals, which has been collected from house construction or demolition, was fired in the field, and incinerated or landfilled after mass collection, such components will result in the toxic air pollutants in the burning or land fills, and spreaded into other areas. So the careful selection of wood and chemicals are required in advance for house construction, in particular, for environment-friendly housings. Therefore, this study was carried out to determine the content of toxic heavy metals in woody materials such as domestic hinoki and imported hemlock treated with CCA for housing materials, and the post-treated wood components such as organic fertilizer, sludge, dry-distilled charcoal and carbonized charcoal, to be returned finally into soil. The results are as follows. 1) The chemical analysis of toxic trace elements in various solid biomass required accurate control and management of laboratory environment, and reagents and water used, because of the error of data due to various foreign substances added in various processing and transporting steps. So a systematic analyzers was necessary to monitor the toxic pollutants of construction materials. 2) In particular, the biomass treated with industrial biological or thermal conditions such as sludge or charcoals was not fully dissolvable after third addition of $HNO_3$ and HF. 3) The natural woody materials such as organic fertilizer, sludge. and charcoals without any treatment of preservatives or heavy metal components were nontoxic in landfill because of the standard of organic fertilizers, even after thermal or biological treatments. 4) The CC A-treated wood for making the construction wood durable should not be landfilled, because of its higher contents of toxic metals than the criterion of organic fertilizer for agriculture or of natural environment. So the demolished waste should be treated separately from municipal wastes.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.1
• /
• pp.103-111
• /
• 2006

Fresh dairy cow manure was mixed with dried sawdust at the following moisture contents and manure: sawdust ratios: 50% and 57:43 ($\underline{M50}$), 55% and 64:36 ($\underline{M55}$), 60% and 70:30 ($\underline{M60}$), 65% and 76:24 ($\underline{M65}$), 70% and 83:17 ($\underline{M70}$) 75% and 90:10($\underline{M75}$) and 80% and 96:04($\underline{M80}$). The mixtures were fermented by a fungal mycelium of Fomitella flaxinea for 2wk at 29 C to recycle cow manure along with sawdust and fungal mycelium as a ruminant feedstuff. Chemical composition and in vitro rumen dry matter digestibilities of fermented mixtures were compared with unfermented mixture. The crude protein contents of mixtures were not changed by fermentation with fungal mycelium. Neutral detergent fiber contents of 4WK fermented mixtures (90.6, 85.3, 80.4, and 76.4% for $\underline{M50}$, $\underline{M60}$, $\underline{M70}$ and $\underline{M80}$, respectively were lower (P<0.05) than those of unfermented mixtures (91.1, 89.9, 84.3, and 79.4%). However, acid detergent fiber contents of fermented mixtures (73.8, 68.9, 65.3, and 58.0%) were higher (P<0.05) than those unfermented mixtures (70.2, 67.8, 61.7, and 56.3%). In vitro rumen dry matter digestibilities of fermented mixtures for four weeks(49.4, 36.8, 28.6, and 22.3% for $\underline{M50}$, $\underline{M60}$, $\underline{M70}$ and $\underline{M80}$) were higher than those of unfermented mixtures(34.1, 27.5, 20.6, and 15.4%) (P<0.05).

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.4
• /
• pp.5-11
• /
• 2014

Recently, there have been various lifeline installations constructed in the underground space of urban area due to the effective use of land. For newly installed lifelines or the management of the installed lifelines, many construction activities of excavation and backfilling are observed. Around these area, there are possibilities of collapse or excessive settlement due to the leaking of the pipe or unsatisfactory compaction of backfill material. Besides, construction costs can be saved since the on-site soils are used. The application of this liquidity filling material is not only to the lifeline installation but also to underpin the foundation under the vibrating machinery. On the evaluation of the applicability of this method to this circumstance, the strength should be investigated against the static load from the machine load as well as the vibration load from the activation of the machine. In this study, the applicability of the liquidity fill material on the foundation under the vibrating machinery is assessed via uniaxial compression and resonant column tests. The liquidity filling material consisting of the on-site soils with loess and kaolinite are tested to investigate the static and dynamic characteristics. Furthermore, the applicability of the reclaimed ash categorized as an industrial waste is evaluated for the recycle of the waste to the construction materials. The experimental results show that the shear modulus and 7 day uniaxial strength of the liquidity filling material mixed with reclaimed ash show higher than those with the on-site soils. However, the damping ratio does not show any tendency on the mixed materials.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24
• /
• pp.5-38
• /
• 1991

비료(肥料)를 공업적(工業的)으로 제조(製造)하여 농업(農業)에 사용(使用)하기 시작(始作)한 이래(以來) 신비종(新肥種)의 개발(開發)에 대한 관심(關心)은 부단(不斷)히 계속(繼續)되어 왔으며 현재(現在)에도 어느 국가(國家)나 생산업계(生産業界)에서 개발(開發)을 위한 노력(努力)을 많이 기우리고 있음이 현실(現實)일 것이다. 어느 국가(國家)와 어느 시대(時代)에 있어서나 현존(現存) 비종(肥種)을 생산(生産)함에는 소비(消費)와 생산면(生産面)에서 상응(相應)하는 사정(事情)이 있었을 것이며 또한 미래(未來)에도 신비종(新肥種)을 개량(改良)하거나 창제(創製)함에는 여러 가지 관련문제(關聯問題)를 검토(檢討)하여 새로운 요구(要求)에 합리적(合理的)으로 부합(符合)되도록 설계(設計)해야 할 것이다. 비료(肥料)는 현대(現代) 농업(農業)에서 불가피(不可避)하게 사용(使用)되는 기본자재(基本資材)이며 세계적(世界的)으로 그 소비(消費)가 증가(增加)되나 국가별(國家別) 농업(農業)의 특수성(特殊性)에 맞추어서 비료(肥料)의 형태(形態)와 생산량(生産量)에 차이(差異)가 있게 되며 또 변화(變化), 개량(改良)될 것이다. 우리나라의 농업(農業)이 최근(最近) 급속(急速)히 변화(變化)되면서 생산수단(生産手段)과 경영(經營)에도 큰 변혁(變革)이 불가피(不可避)하게 따라야 할 것으로 판단(判斷)된다. 생산수단(生産手段)의 개량(改良)은 농산물(農産物) 생산가(生産價)를 낮추고 노력(勞力)의 투입(投入)을 줄이며 우수품질(優秀品質)의 농산물(農産物)을 안정적(安定的)으로 생산(生産)하기 위한 대응책(對應策)이 될 것이다. 비료(肥料)의 사용(使用)은 이러한 시대적(時代的) 요구(要求)에 맞추어 신비종(新肥種)이 개발(開發)되고 시용기술면(施用技術面)에서 발전(發展)이 있어야 될 것이다. 미래(未來)의 우리 나라 농업(農業)을 위하여 개발(開發)되어야 할 비종(肥種)의 형태(形態)와 그에 관련(關聯)되는 요건(要件)은 다음과 같이 요약(要約)된다. 1. 시비효율(施肥效率)을 높히기 위하여서나 성력재배(省力裁培)를 위하여 완효성(緩效性) 비료(肥料) 특히 질소비료(窒素肥料)의 신비종(新肥種) 개발(開發)이 절실(切實)히 필요(必要)하다고 판단(判斷)됨. 신비종(新肥種)은 대상작물(對象作物)의 종류(種類), 재배방식(裁培方式) 및 기계화(機械化) 상태(狀態)에 적합(適合)한 형태별(形態別)로 제조(製造)됨이 바람직함. 완효성(緩效性) 질소비료(窒素肥料)의 제조(製造)에는 화학합성(化學合成), 성형화(成形化), 흡착화(吸着化) 및 피복화(被覆化) 방식중(方式中) 성형화(成形化)에 의한 것이 최다(最多)이나 피복화(被覆化)도 재료(材料)와 기술(技術)의 발전(發展)에 따라 증가(增加)의 경향(傾向)임. 2. 현존(現存) 복합비료(複合肥料)의 토양(土壤) 및 작물(作物)에 대한 적합성(適合性)을 재검토(再檢討)하여 효율(效率)을 높히도록 개량(改良)함. 3. 소시비방식(少施肥方式)의 영농(營農)으로서 환경(環境)을 오염(汚染)으로부터 방호(防護)할 것이며 4. 작물종류(作物種類)(품종포함(品種包含)) 유전자형별(遺傳子型別) 비료감응성(肥料感應性)을 검정(檢定)하여 소시비(少施肥), 고효율(高效率)을 기(期)하도록함. 5 작물(作物)의 영양생리학(營養生理學) 분야(分野)에서도 비료외적(肥料外的)인 성장관련요인(成長關聯要因)의 작용(作用)을 연구(硏究)하여 응용(應用)의 가능성(可能性)을 추구(追究)함이 미래(未來)의 한 과제(課題)가 될 것으로 생각됨. 예(例): 유전공학적(遺傳工學的) 기법(技法)에 의한 성장인자(成長因子)의 개량(改良) 또는 시비효율(施肥效率)의 증대(增大) 작물성장(作物成長)과 미생물활동(微生物活動)과의 상호관계(相互關係) 등(等). 6. 가용(可用) 자원(資源)의 비료화(肥料化)를 위하여 타산업(他産業)의 부산물(副産物) 및 폐기물(廢棄物) (특히 유기질(有機質) 자원(資源))을 효율적(效率的)으로 재활용(再活用)하도록 함.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.1
• /
• pp.27-34
• /
• 2008

To effectively treat the domestic sewage that was produced on a small-scale in farming and fishing village in order to encourage an ecologically friendly environment, a small-scale sewage treatment apparatus using natural purification methods that consisted of an aerobic and an anaerobic plots were constructed. The efficiency of sewage treatment according to the sewage loading was investigated to obtain the optimum sewage loading in small-scale sewage treatment apparatus. Removal rate of pollutants according to the sewage loading were in the order of $150\;Lm^{-2}day^{-1}{\fallingdotseq}300\;Lm^{-2}day^{-1}>600\;Lm^{-2}day^{-1}$. Therefore, the optimum sewage loading was 300 L m-2 day-1. Under the optimum sewage loading, removal rate of BOD, $COD_{Mn}$, turbidity, T-N and T-P were 99, 94, 99, 49 and 89%, respectively. However, to satisfy the water quality standard in effluent in small-sclae sewage treatment apparatus for domestic sewage treatment, the low removal efficiency of T-N and T-P must be improved. So to improve the removal rate of T-N and T-P, the efficiency of sewage treatment according to the improved sewage treatment process such as, re-treatment at aerobic plot, anaerobic condition of aerobic plot, changing the filter media sizes and the depths in anaerobic plot, and also addition of oyster shells to filter media at anaerobic plot were investigated. In case of 150 cm depth in anaerobic plot with filter medium A (effectivity particle size 1.50 mm) and addition of oyster shells to filter media at anaerobic plot, removal rate of T-N and T-P in both plots were increased by 10 and 3%, and 14 and 7% in comparison with 100 cm depth in anaerobic plot with filter medium B(effectivity particle size 0.95 mm), respectively. The optimum improved sewage treatment process in small-scale sewage treatment apparatus were 150 cm depth in anaerobic plot with filter medium A and addition of oyster shells to filter media at anaerobic plot.