• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.2
• /
• pp.113-119
• /
• 2019

We have developed the multi-functioned friction measuring instrument for the previous research. In here, we improved the performance of friction measuring instrument by applying the adaptive smoothing method and analyzed the friction of plate and monitoring function of friction surface through scratch tests. We substituted lubricant steel plate to lubricant oil used for reducing the friction when fabricating steel plate because lubricant oil was regarded as one of the major causes for the environmental pollution. In particular, the functions of various plate such as galvannealed steel sheets were analyzed because friction coefficient could be changed depending on the type of organic/inorganic plate or state of coating layer. Therefore, we demonstrated that adaptive smoothing method could enhance the accuracy of measuring instrument which eliminate the noise. As a result of using the method, it showed the reduction rate 0.0417% for the friction coefficient 0.16.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1684-1691
• /
• 2015

For performance improvement and compactness, usage of enhanced tube is inevitable. However, studies on enhanced tubes for generator is very limited. In this study, pool boiling tests were conducted for 7 heat transfer tubes. Test range covered pressure 7.38~101.3 kPa and heat flux $20{\sim}40kW/m^2$. Results show that boiling heat transfer coefficient increases as pressure or heat flux increases. Under atmospheric condition, high heat transfer coefficients were obtained for notched fin and low fin tubes(225% and 202% of the 19.0 mm smooth tube, which yielded the lowest heat transfer coefficient). As pressure decreased, high heat transfer coefficients were obtained for a low fin tube(290% and 288% of the 19.0 mm smooth tube at 12.34 and 7.38 kPa).

• The Korean Journal of Applied Statistics
• /
• v.13 no.2
• /
• pp.371-381
• /
• 2000

In this paper, we describes smoothing spline in nonparametric regression and some asymptotic results for estimates of the regression cofficients in the parametric part were biased on semi parametric regression estimator.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.163-163
• /
• 2011

평활입자동역학법(SPH, Smoothed Particle Hydrodynamics)은 붕괴파(도수, 댐붕괴류, 쇄파) 등과 같이 수면 변동이 큰 유체 역학 문제를 해결하기 위한 무격자법 중의 하나이다. SPH를 이용한 붕괴파의 모의에서는 압력, 점성, 밀도(압축성), 척력 등 다양한 계산 인자가 필요하다. 이들 인자가 SPH 모의 결과에 미치는 영향을 도수와 댐붕괴류에 대해서 검토하였다. 그 결과 압력과 관련하여, 상태 방정식 계수로 표현되는 유체의 음속은 입자들의 흩어짐 현상과 밀접한 관계를 가지는 것을 밝혀내었다. 평활 거리는 수치해의 안정성과 밀접한 관련이 있으며, 너무 작거나 크게 설정하는 경우 해의 정확도가 떨어지는 것으로 나타났다. 일반적으로 2차원 문제의 경우 20~23개 정도의 입자가 해의 내삽에 사용되는 것이 바람직하다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.311-315
• /
• 1992

일반적으로 기계구조물에서는 비교적 응력확대계수 K의 해석이 용이한 판 두께를 관통하는 관통크랙보다는 표면에 존재하는 결함에서 발생, 전파하는 표면 크랙이 대부분이다. 표면은 내부보다 소성변형에 대한 저항이 작고, 대기에 직접 접해 있으며, 평활재에 있어서의 인장, 압축이외의 응력은 일반적으로 표면에서 최대가 되는 등의 이유로 내부보다 쉽게 피로재해를 받는다. 침탄질화 열처리를 하는 중요한 목적이 재료 표면에 있어서 경화능과 피로강도의 향상이므로 침탄질화 처리재의 표면 크랙에 관한 연구가 절실히 요구됨은 당연하다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.6
• /
• pp.787-795
• /
• 2009

This paper presents a histogram equalization based on the logistic function for enhancing the quality of images. The histogram equalization is a simple and effective spatial processing method that it enhances the quality by adjusting the brightness of image. The logistic function that is a nonlinear transformation function is applied to adaptively enhance the brightness of the image according to its intensity level frequency. We propose a flexible and asymmetrical logistic function by only using the intensity level with maximum frequency and the maximum intensity level in an histogram, and the total number of pixels. The proposed function excludes both the computation load of an exponential function and the heuristic setting of an optimal parameter values in the traditional logistic function. The proposed method has been applied for equalizing many images with a different resolution and histogram distribution. The experimental results show that the proposed method has the superior enhancement performances and the faster equalizing speed compared with the traditional histogram equalization and the adaptively modified histogram equalization, respectively. And the proposed histogram equalization can be used in various multimedia systems in real-time.

• Composites Research
• /
• v.12 no.3
• /
• pp.26-35
• /
• 1999

The static strength and fatigue life of repaired graphite/epoxy laminates are observed using tensile coupon. The lay-up of investigated laminates was [$0^{\circ}$/$\pm$$45^{\circ}$/$90^{\circ}$]$_s$. Static strength was measured from the specimens prepared by various repair techniques such as precured-single patch, precured-double patch and cure-in-place methods. The strength was recovered to the extent of 60~80 % of unnotched case. Fatigue life was also measured from the laminates repaired with cure-in-place method. Hwang and Han's MFLPE 1(modified fatigue life prediction equation 1), which was based on the fatigue modulus degradation model and reference modulus, was chosen for fatigue life prediction of repaired specimen and compared with the conventional fatigue life equation such as S-N curve and Basquin's relation. The MFLPE 1 has better agreement with experimental data than S-N curve and Basquin's relation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.2009-2019
• /
• 2013

Traffic volumes are the important basic data which are directly used for transportation network planning, highway design, highway management and so forth. They are collected by two types of collection methods, one of which is the continuous traffic counts and the other is the short duration traffic counts. The continuous traffic counts are conducted for 365 days a year using the permanent traffic counter and the short duration traffic counts are conducted for specific day(s). In case of the continuous traffic counts the missing of data occurs due to breakdown or malfunction of the counter from time to time. Thus, the diverse imputation methods have been developed and applied so far. In this study the applied exponential smoothing method, in which the data from the days before and after the missing day are used, is proposed and compared with other imputation methods. The comparison shows that the applied exponential smoothing method enhances the accuracy of imputation when the coefficient of traffic volume variation is low. In addition, it is verified that the variation of traffic volume at the site is an important factor for the accuracy of imputation. Therefore, it is necessary to apply different imputation methods depending upon site and time to raise the reliability of imputation for missing traffic values.

• Solar Energy
• /
• v.13 no.2_3
• /
• pp.91-106
• /
• 1993

The purpose of this study was to investigate the enhancement of heat transfer coefficient in double pipe fluidized bed heat exchangers. The inner tube used a smooth tube and a finned tube equipped with longitudinal fins. The heat transfer coefficients between the heated tube and fluidized bed of alumina beads were calculated as a function of fluidized velocity in various particle sizes($d_p$=0.41, 0.54, 0.65, 0.77mm) and static bed heights($H_o$=50, 100, 150, 200, 250mm). The coefficient for finned tube is higher than for smooth tube. And the maximum increasing rate is 7.8 times in smooth tube and 12.9 times in finned tube.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.1
• /
• pp.17-27
• /
• 1991

The determination of the stress intensity factors is investigated by means of a surface integral defined around the crack tip of the structure. It has been shown in this work that this integral is derived from the standard path integral J. The use of the surface integral has also been extended to the case where body forces act. Computer program obtaining the stress intensity factors $K_I$ and $K_{II}$ is developed, which prepares input variables from the result of the conventional finite element analysis. This paper provides a parabolic smooth curve function. By the use of the function and conventional element meshes in which the aspect ratio (element length/crack length)is about 25 percent, relatively correct $K_I$ and $K_{II}$ values can be obtained for the exterior radius ranging from 1/3 to 1 of the crack length.