• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.2
• /
• pp.215-221
• /
• 1984

To investigate stability for the quality of selected ginseng products, their sorption properties were clarified in red ginseng extract(RGEP), and red ginseng extract powder(RGEP), and red ginseng extract tea(RGET). Simultaneously, the BET monolayer value of each product was determined in order to inquire out the possibility of establishment as a criterion for the optimum moisture content of the ginseng products. Based on the BET monolayer moisture level of spray dried RGEP which ranged from 4.08 to 4.65%, it would be desirable to establish the optimum moisture content of the products at 4.4${\pm}$0.3%. This is 1.3 to 1.9% lower than the criter on, "less than 6.0%". The optimum moisture level for RGET of which monolayer value ranged 0.93 to 1.37% would be 1.2${\pm}$0.17%. In this case, the maximum permissible limit of moisture content could presumably be raised up to 1.37% in place of current criterion, "less than l.2%". From the results of a study on the growth of molds, the optimum moisture content for RGE assumed to be extended up to 40.0${\pm}$1.07 despite 36.0${\pm}$1.0% of the present criterion. On the other hand, a storage study under the maltreated condition, $48{\pm}2^{\circ}C$ 75%RH, was also carried out in order to make it clear whether the BET monolayer values were able to be used as indices for optimum moisture level of the products. In all samples tested adsorption occurred at even higher levels of moisture than the monolayer values. However, since there are many other possible factors affecting the quality of products the optimum moisture content is preferable to be reduced to the monolayer value. As a result, it was proved that the optimum level of moisture for both RGEP and RGET could be established by the monolayer values.

• Economic and Environmental Geology
• /
• v.43 no.6
• /
• pp.555-564
• /
• 2010

Remediation process by using the bio-carrier (beads) with dead Bacillus sp. B1 and polysulfone was investigated for heavy metal contaminated groundwater. Sorption batch experiments using the bio-carrier were performed to quantify the heavy metal removal efficiencies from the contaminated solution. The analyses using SEM/EDS and TEM for the structure and the characteristic of precipitates on/inside the beads were also conducted to understand the sorption mechanism by the bio-carrier. Various amounts of freeze-dried dead Bacillus sp. B1 were mixed with polysulfone + DMF(N,N-dimethylformamide) solution to produce the bio-carrier (beads; less than 2mm in diameter) and 5% of Bacillus sp. B1 in the bio-carrier was optimal for Pb removal in the solution. The removal efficiency ratings of the bio-carrier for Pb, Cu and Cd were greater than 80% after adding 2g of bio-carrier in 50ml of aqueous solution (<10mg/L of each heavy metal concentration). Reaction time of the bio-carrier was very fast and most of the sorption reaction for heavy metals were completed within few hours. Batch experiments were duplicated at various pH conditions of aqueous solutions and Cu and Pb removal efficiencies highly maintained at wide pH ranges (pH 2-12), suggesting that the bio-carrier can be useful to clean up the acidic waste water such as AMD. From SEM/EDS and TEM analyses, it was observed that the bio-carrier was spherical shape and was overlapped by many porous layers. During the sorption experiment, Pb was crystallized on the surface of porous layers and also was mainly concentrated at the boundary of Bacillus sp. B1 stroma and polysulfone substrate, showing that the main mechanism of the bio-carrier to remove heavy metals is the sorption on/inside of the bio-carriers and the bio-carriers are excellent biosorbents for the removal of heavy metal ions from groundwater.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.2
• /
• pp.57-65
• /
• 2000

Objective of research is obtain fundamental data of carbonized wood wastes for soil condition, de-ordorization, absorption of water, carrier for microbial activity, and purifying agent for water quality of river. The carbonization technique and the properties of carbonized wood wastes(wood-based materials) were analyzed. Proximate analysis showed the wood-based materials contains 0.37~2.27% ash, 70~74% volatile matter, and 17~20% fixed carbon. As carbonization temperature was increased, the charcoal yield was decreased. However, no difference in charcoal yield was found due to time increase. The specific gravity after the carbonization decreased about 30~40% comparing to green wood. The charcoal had 1.08~4.18% ash, 5.88~13.79% volatile matter, and 80.15~90.94% fixed carbon. The pH of plywood and particleboard(pH 9 at $400^{\circ}C$, pH 10 at $600^{\circ}C$ and $800^{\circ}C$) made charcoals was higher than that of fiberboard. The water-retention capacity was not affected by the carbonization temperature and time. The water-retention capacity within 24h was about 2~2.5 times of sample weight, and the Equilibrium moisture content(EMC) became 2~10% after 24h. EMC of charcoal from the thinned trees were 9.40~11.82%($20^{\circ}C$, RH 90%), 6.87~7.61%($20^{\circ}C$, RH 65%), and 1.69~2.81%($20^{\circ}C$, RH 25%). EMC of charcoal from the wood-based materials under $20^{\circ}C$, relative humidity(RH) 90% was similar to EMC of charcoal from the thinned trees(9~11 %). However, under $20^{\circ}C$, RH 25.65%, EMC of charcoal from the wood-based materials were higher(2~3%) than EMC of charcoal from the thinned trees. Every charcoal from the wood-based materials fulfilled the criteria in JWWA K 113-1947.

• Korean journal of food and cookery science
• /
• v.12 no.2
• /
• pp.186-192
• /
• 1996

Retrogradation of non-waxy rice (NWR) and waxy rice (WR) cakes (45% moisture) stored at 5$^{\circ}C$, $25^{\circ}C$ and -2$0^{\circ}C$ was studied by differential scanning calorimetry (DSC) and enzymatic ($\beta$-amylase-puuulanase) method. With DSC, endotherms did not appear with rice cakes stored at room ($25^{\circ}C$) and deep freezing (-2$0^{\circ}C$) temperatures but did with samples stored at low temperature (5$^{\circ}C$), showing accelerated retrogradation by low temperature. Onset temperature (To) and peak temperature (Tp) did not change under 14 days at 5$^{\circ}C$ but enthalpy values ($\Delta$H) increased rapidly within one day and increased steadily until 5th day of storage, then equilibrated. Higher $\Delta$H were obtained with WR cakes than NWR cakes. It was suggested that more amylopectin recrystallization occured with WR than NWR. Degrees of gelatinization of rice cakes determined by enzymatic method increased in the following order: 5$^{\circ}C$ < $25^{\circ}C$ < -2$0^{\circ}C$. In contrast with DSC results, dogrees of gelatinization of NWR cakes, were relatively lower than that of WR cakes. However, increased retrogradation extents (melting enthalpies) caused reduced enzyme susceptibilities to $\beta$-amylase-pullulanase system, among NWR or WR cakes stored at 5$^{\circ}C$. The degrees of retrogradation of rice cakes stored at 5$^{\circ}C$ were higher than those stored at $25^{\circ}C$ and -2$0^{\circ}C$ without regard to the kind of rice. The higher sensitivity of the enzymatic method was obtained than that of DSC method when the degrees of retrogradation of rice cakes were determined during storage under this experiment conditions.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.249-254
• /
• 2022

With the rapid advance of the semiconductor and Information and communication technologies, remote environment monitoring technology, which can detect and analyze surrounding environmental conditions with various types of sensors and wireless communication technologies, is also drawing attention. However, since the conventional remote environmental monitoring systems require external power supplies, it causes time and space limitations on comfortable usage. In this study, we proposed the concept of the self-powered remote environmental monitoring system by supplying the power with the levitation-electromagnetic generator (L-EMG), which is rationally designed to effectively harvest biomechanical energy in consideration of the mechanical characteristics of biomechanical energy. In this regard, the proposed L-EMG is designed to effectively respond to the external vibration with the movable center magnet considering the mechanical characteristics of the biomechanical energy, such as relatively low-frequency and high amplitude of vibration. Hence the L-EMG based on the fragile force equilibrium can generate high-quality electrical energy to supply power. Additionally, the environmental detective sensor and wireless transmission module are composed of the micro control unit (MCU) to minimize the required power for electronic device operation by applying the sleep mode, resulting in the extension of operation time. Finally, in order to maximize user convenience, a mobile phone application was built to enable easy monitoring of the surrounding environment. Thus, the proposed concept not only verifies the possibility of establishing the self-powered remote environmental monitoring system using biomechanical energy but further suggests a design guideline.

• Korean Journal of Animal Reproduction
• /
• v.23 no.2
• /
• pp.141-148
• /
• 1999

This study was to test whether the viability of bovine hatched blastocysts (HBs) can be maintained after vitrification and thawing. The HBs were produced in vitro at Day 9 and Day 10 after IVF, and they were classified to small (S-HBs; ø$\leq$300 ${\mu}{\textrm}{m}$) and large(L-HBs; ø＞300 ${\mu}{\textrm}{m}$) on the basis of embryo diameter using eyepiece micrometer. As freezing solution, we used EFS35 which consisted of 35% ethylene glycol (EG), 18% ficoll, 0.3 M sucrose and 10% FBS added in mDPBS. Vitrification was taken by two-step method, the HBs were equilibrated in 10% EG for 5 minutes and then shortly exposed in EFS35 and plunged into L$N_2$for 30~45 sec. After thawing, the survival rates were assessed by the re-expansion of the blastocoel during 2 h and 16 h of culture. The results obtained in these experiments were summarized as follows; 1) When the blastocysts(40.8%) recovered at Day 8 after IVF were further cultured for 24 h(Day 9 after IVF) and 48 h(Day 10 after IVF), the rates of HBs were 20.5% and 6.7%, respectively. Also, the total cell number of HBs on Day 9 was significantly higher than that of HBs on Day 10 (p＜0.01). 2) When the effects of freezing solution to the survival of Day 9 L-HBs were examined, the rate of vitrified group (75.7%) was significantly lower than 100% of control and exposed group(p＜0.05). 3) When the survival rates of vitrified HBs according to size and developmental age were examined, the data of L-HBs (75.5%) and S-HBs(63.6%) on Day 9 were slightly higher than those of L-HBs(64.3%) and S-HBs(60.7%) on Day 10. 4) Also, when the in vitro survival of Day 9 HBs was evaluated under different culture condition after thawing, the result in culture medium only (79.3%) was significantly higher than 43.2% in co-culture group (p＜0.05). These results demonstrated that bovine HBs can be successfully cryopreserved by two-step vitrification method using EFS35.

• 재활복지
• /
• v.14 no.3
• /
• pp.225-256
• /
• 2010

This study aims to provide the basic data of the rehabilitation program for the schoolchild with intellectual disability by designing new framework of the features of postural control for the schoolchild with intellectual disability. For this, the study investigated what sensations the schoolchild are using to maintain posture by selectively or synthetically applying vision, vestibular sensation and somato-sensation, and how the coordinative sensory system of the schoolchild is responding to any sway referenced sensory stimulus. The study intended to prove the limitation of motor system in estimating the postural stability by providing the cognitive motor task, and provided the features of postural control of the schoolchild with intellectual disability by measuring the onset times and orders of muscle contraction of neuron-muscle when there is a postural control taking place due to the exterior disturbance. Furthermore, by comparatively analyzing the difference between the normal schoolchild and the intellectually disabled schoolchild, this study provided an optimal direction for treatment planning when the rehabilitation program is applied in the postural control ability training program for the schoolchild with intellectual disability. Taking gender and age into consideration, 52 schoolchild including 26 normal schoolchild and 26 intellectually disabled schoolchild were selected. To measure the features of postural control, CTSIB test, and postural control strategy test were conducted. The result of experiment is as followed. First, the schoolchild with intellectual disability showed different feature in using sensory system to control posture. The normal schoolchild tended to depend on somato-sensory or vision, and showed a stable postural control toward a sway referenced stimulus on somato-sensory system. The schoolchild with intellectual disability tended to use somato-sensory or vision, and showed a very instable postural control toward a sway referenced vision or a sway referenced stimulus on somato-sensory system. In sensory analysis, the schoolchild with intellectual disability showed lower level of proficiency in somato-sensation percentile, vision percentile and vestibular sensation percentile compare to the normal schoolchild. Second, as for the onset times and orders of muscle contraction for strategies of postural control when there is an exterior physical stimulus, the schoolchild with intellectual disability showed a relatively delayed onset time of muscle control, and it was specially greater when the perturbation is from backward. As for the onset orders of muscle contraction, it started from muscles near coax then moved to the muscles near ankle joint, and the numbers and kinds of muscles involved were greater than the normal schoolchild. The normal schoolchild showed a fast muscle contracting reaction from every direction after the perturbation stimulus, and the contraction started from the muscles near the ankle joint and expanded to the muscles near coax. From the results of the experiments, the special feature of the postural control of the schoolchild with intellectual disability is that they have a higher dependence on vision in sensory system, and there was no appropriate integration of swayed sensation observed in upper level of central nerve system. In the motor system, the onset time of muscle contraction for postural control was delayed, and it proceeded in reversed order of the normal schoolchild. Therefore, when use the clinical physical therapy to improve the postural control ability, various sensations should be provided and should train the schoolchild to efficiently use the provided sensations and use the sensory experience recorded in upper level of central nerve system to improve postural control ability. At the same time, a treatment program that can improve the processing ability of central nerve system through meaningful activities with organizing and planning adapting reaction should be provided. Also, a proprioceptive motor control training program that can induce faster muscle contraction reaction and more efficient onset orders from muscularskeletal system is need to be provided as well.

• Economic and Environmental Geology
• /
• v.56 no.2
• /
• pp.125-138
• /
• 2023

Most of previous cesium (Cs) sorbents have limitations on the treatment in the large-scale water system having low Cs concentration and high ion strength. In this study, the new Cs sorbent that is eco-friendly and has a high Cs removal efficiency was developed by improving the coal mine drainage treated sludge (hereafter 'CMDS') with the addition of Na and S. The sludge produced through the treatment process for the mine drainage originating from the abandoned coal mine was used as the primary material for developing the new Cs sorbent because of its high Ca and Fe contents. The CMDS was improved by adding Na and S during the heat treatment process (hereafter 'Na-S-CMDS' for the developed sorbent in this study). Laboratory experiments and the sorption model studies were performed to evaluate the Cs sorption capacity and to understand the Cs sorption mechanisms of the Na-S-CMDS. The physicochemical and mineralogical properties of the Na-S-CMDS were also investigated through various analyses, such as XRF, XRD, SEM/EDS, XPS, etc. From results of batch sorption experiments, the Na-S-CMDS showed the fast sorption rate (in equilibrium within few hours) and the very high Cs removal efficiency (> 90.0%) even at the low Cs concentration in solution (< 0.5 mg/L). The experimental results were well fitted to the Langmuir isotherm model, suggesting the mostly monolayer coverage sorption of the Cs on the Na-S-CMDS. The Cs sorption kinetic model studies supported that the Cs sorption tendency of the Na-S-CMDS was similar to the pseudo-second-order model curve and more complicated chemical sorption process could occur rather than the simple physical adsorption. Results of XRF and XRD analyses for the Na-S-CMDS after the Cs sorption showed that the Na content clearly decreased in the Na-S-CMDS and the erdite (NaFeS₂·2(H₂O)) was disappeared, suggesting that the active ion exchange between Na⁺ and Cs⁺ occurred on the Na-S-CMDS during the Cs sorption process. From results of the XPS analysis, the strong interaction between Cs and S in Na-S-CMDS was investigated and the high Cs sorption capacity was resulted from the binding between Cs and S (or S-complex). Results from this study supported that the Na-S-CMDS has an outstanding potential to remove the Cs from radioactive contaminated water systems such as seawater and groundwater, which have high ion strength but low Cs concentration.