• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.3
• /
• pp.547-556
• /
• 2000

A study have been conducted for the adsorption and desorption characteristics of Cu ion using manganese nodule as adsorbent. For 100 ppm Cu ion solution, the adsorbed amount of Cu ion was more than 90 % at equilibrium state. Adsorption was equilibrated in 42 hours the adsorption reaction was shown to be first order reaction. For the desorption reaction of Cu ion in the region of solution pH 3.5~9.5, the desorption was completed in the acidic region, but it has been decreased as the pH was raised. Also, the desorption rate was higher in the acidic region compared with alkaline region. The desorbed amount was decreased as the reaction temperature increased, therefore, the desorption reaction was thought to be exothermic. Also, several thermodynamic properties were calculated based on experimental results and compared with theoretically driven values. To see the effect of complexing agent on the desorption of Cu ion, EDTA was introduced and the des orbed amount increased in the presence of EDTA.

• Journal of the Korean Chemical Society
• /
• v.36 no.2
• /
• pp.174-179
• /
• 1992

Reaction of aniline and iodine in$CHCl_3,\;CH_2Cl_2 : CHCl_3$(1 : 1), and $CH_2Cl_2$ has been studied kinetically by using conductivity method, Pseudo first-order rate constants ($k_{obs}$) and second-order rate constants ($k_{obs}$/[aniline]) are dependent on the aniline concentration. Second-order rate constants obtained were increased with increasing aniline concentration. We analysed these results on the basis of formation of charge transfer complex as reaction intermediate. From the construction of react ion scheme and derivation of rate equation, we calculated equilibrium constants and activation parameters for the formation and transformation of charge transfer complex. The equilibrium constants were decreased by an increase in the dielectric constant of the solvent and the value is 1.7-3.7$M^{-1}$. The rate of transformation are markedly affected by the solvent polarity. ${\Delta}H^{\neq}$ is about 14.2kJ/mol, and ${\Delta}S^{\neq}$ is large negative value of -243J/mol K.

• Journal of the Korean Geophysical Society
• /
• v.9 no.1
• /
• pp.27-36
• /
• 2006

The radiative convective equilibrium (RCE) temperature was calculated for the climate change study at King Sejong Station in West Antarctica. As a result of RCE model sensitivity test, the increases of surface albedo, solar zenith angle, and cloud optical thickness decrease surface temperature. On the other hand, the increases of carbon dioxide and cirrus cloud amount are caused by surface warming due to the greenhouse effect. According to the model calculation result, annual mean surface temperature shows a upward trend of 0.012oC/year during the period of 1958-2001. During the period of 1989∼2001, the trend of monthly mean surface temperature by model calculation is 0.01oC/month and the observation trend is 0.005oC/month.

• Economic and Environmental Geology
• /
• v.48 no.2
• /
• pp.131-145
• /
• 2015

Thermodynamic prediction of weathering products from primary aquifer minerals around underground disposal sites was investigated. The distribution of solubility quotients for kaolinite-smectite reactions showed the trend of reaching at equilibrium with Ca-, Mg-, and Na-smectite for deep groundwaters in granitic aquifers. The values of $10^{-14.56}$, $10^{-15.73}$, and $10^{-7.76}$ were proposed as equilibrium constants between kaolinite and Ca-, Mg-, and Na-smectite end members, respectively. On stability diagrams, most of deep groundwaters were located at equilibrium boundaries between stability fields of kaolinite and smectites or on stability fields of smectites and illite. Shallow groundwaters in basic rock aquifer were plotted at the same stability areas of deep granitic groundwaters on stability diagrams. The results indicated that the primiary mineralogical composition may be important to predict weathering products in deep aquifers.

• Resources Recycling
• /
• v.23 no.1
• /
• pp.33-39
• /
• 2014

In this study, the solubility of Cu, which is a main metal component of wasted PCB, in $CaO-SiO_2-Al_2O_3-MgO$ slag system was investigated. Each 20 grams of Cu chips and the quaternary slag manufactured was placed in an carbon crucible and melted for 10 hours in the temperature between 1673 K and 1825 K to confirm the equilibrium state. The oxygen partial pressure was controlled by the ratio of CO and Ar gas in the range of $10^{-17.23}$ to $10^{-15.83}$ atm. The concentration of Cu in the slag increased with increasing oxygen partial pressure, slag basicity, and MgO content in the slag. The concentration of Cu in the slag decreased with increasing temperature. The Cu dissolution reaction in the slag is an exothermic reaction.

• Journal of the Korean Chemical Society
• /
• v.45 no.2
• /
• pp.131-137
• /
• 2001

The protonation and stability constants of complexation of Zn(II), Cd(II) and Pb(II), Hg(II) ion with sulfur-containing podand ligands such as tri(phenylthio-2-ethy1)amine (Podand N$_1$S$_3$)tetra(phenylthio-2-ethyl)ethylenediamine (Podand N$_2$S$_4$) , tris(1-benzylaminoethyl)amine (Podand N$_4$) have been determined by potentiometric titration in 95% methanol at variable temperatures, From these studies, we observed that podand N$_4$ ligand showed the largest protonation constant. Protonation constant, stability constant, enthalpy, entropy of Zn(II), Cd(II) and Pb(II), Hg(II),ions increased with the following order podand N$_1$S$_3$$_2$S$_4$$_4$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.3
• /
• pp.276-280
• /
• 2017

In this study, we investigated the effect of sterilization and the neutralization of treated ballast water using seawater electrolysis. The electrolysis apparatus has a cation-selective membrane for passing the cation and a titanium electrode in each cell. We examined the sterilization effect after an incubation period of 24 hr. The oxidation reaction during electrolysis caused, the solution to become strongly acidic due to the generation of a hydroxyl group, and the oxidation reduction potentials(ORP) was increased to 800 - 1200mV. After the reduction reaction, the solution became alkaline(pH 9 - 12), and ORP was decreased to - 900 - - 750 mV. It might be possible to control the pH of ballast water through electrolysis. In addition, we demonstrated the effects of sterilization of ballast water containing generated hypochlorous acid using electrolysis under high ORP condition.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.1
• /
• pp.35-45
• /
• 2005

Numerical study is carried out to investigate the effects of chemistry and thermal radiation on the rocket plume flow field at various altitudes. Navier-Stokes equations for compressible flows were solved by a fully-implicit TVD code based on the finite volume method. An infinitely fast chemistry module for hydrocarbon mixture with detailed thermo-chemical properties and a thermal radiation module for optically thick media were incorporated with the fluid dynamics code. The plume flow fields of a kerosene-fueled rocket flying at Mach number zero at sea-level, 1.16 at altitude of 5.06 km and 2.90 at 17.34 km were numerically analyzed. Results showed the plume structures at different altitude conditions with the effects of chemistry and radiation. It is understood that the excess temperature by the chemical reactions in the exhaust gas may not be ignored in the view point of propulsion performance and thermal protection of the rocket base, especially at higher altitude conditions.

• Journal of the Korean Chemical Society
• /
• v.39 no.4
• /
• pp.281-287
• /
• 1995

Copper(Ⅱ) complexes with N,N'-oxalylbis(salicylaldehydehydrazone), N,N'-malonylbis(salicylaldehydehydrazone) and N,N'-succinylbis(salicylaldehydehydrazone) have been prepared in 95% DMF. Their protonation and stability constants were investigated by potentiometric titration. We observed that MBSH ligand showed the largest protonation constant. The values of the protonation constants among three different ligands were increased as following order SBSH < OBSH < MBSH. However, the increasing order of stability constants was somewhat different such as Cu(Ⅱ)-SBSH < Cu(Ⅱ)-MBSH < Cu(Ⅱ)-OBSH. In addition, thermodynamic parameters, ΔH and ΔS of Cu(Ⅱ) complexes have been studied. As a result, we found the SBSH ligand produced the best stable copper (Ⅱ) complex.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3319-3326
• /
• 2014

Eosin yellow is used a dye and colorant but it is harmful toxic substance. In this paper, batch adsorption studies were carried out for equilibrium, kinetics and thermodynamic parameters for eosin yellow adsorption by activated carbon with varying the operating variables like pH, initial concentration, contact time. Equilibrium adsorption data were fitted into Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherms. By estimated Langmuir constant value, $R_L$=0.067-0.083, and Freundlich constant value, $\frac{1}{n}=0.237-0.267$, this process could be employed as effective treatment for removal of eosin yellow. From calculated Temkin constant, value, B=1.868-2.855 J/mol, and Dubinin-Radushkevich constant, value, E=5.345-5.735 kJ/mol, this adsorption process is physical adsorption. From kinetic experiments, the adsorption process were found to confirm to the pseudo second order model with good correlation coefficient($r^2$=0.995-0.998). The mechanism of the adsorption process was determined two step like as boundary and intraparticle diffusion.