• Proceedings of the KIEE Conference
• /
• 2006.05a
• /
• pp.86-89
• /
• 2006

대상 전력기기와 위치가 정해지지 않은 상태에서 UHF 부분방전 센서의 성능 측정시, 유효높이는 유용한 파라메터이며 이를 용이하게 측정하기 위해서 표준전계 발생장치가 필요하다. 표준전계를 발생을 위해 평행판 전송선로 형태의 TEM Line을 설계 제작하였으며, 제작된 TEM Line의 특성을 살펴보았고, 표준프로브법을 이용하여 TEM Line의 내부 전계를 보정하기위한 실험을 실시하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2007.11a
• /
• pp.63-66
• /
• 2007

본 논문에서는 주변에서 쉽게 구할 수 있는 재료를 이용해 만든 인덕터와 커패시터를 사용해 윌킨슨 전력 분배기를 설계/제작하였다. 일반적으로 전력 분배기는 $\lambda/4$ 전송선로를 이용하기 때문에 인덕터와 커패시터를 사용할 수 있도록 전송선로를 집중소자로 변환해야 한다. 전송선로를 집중소자로 변환하기 위해 한 개의 직렬 인덕터와 두 개의 병렬 커패시터로 등가화하였다. 인덕터는 솔레노이드 형태로 선의 굵기와 솔레노이드의 반지름, 감은수에 변화를 주며 제작하였고, 커패시터는 평행판 커패시터 형태로 넓이에 변화를 주어 제작하였다. 구현된 전력 분배기는 설계 주파수에서 각각의 출력 포트에 -3.30dB, -3.31dB로 전력이 균등분배 되는 특성을 보였고, 반사손실은 -42.36dB, 출력 포트 간의 격리도는 -31.54dB로 설계 조건을 만족하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1159-1164
• /
• 2006

Broadband antennas have late-time ringing by multi-reflections between feed points and 0pen ends of the antennas, which indicates the narrowband nature of the antenna. The resistive loading has been used to reduce the late time ringing that is important for ground penetrating radar and resonance detection systems in order to prevent masking of target. In this paper, we design an ultra wide band antenna with resistive loading technique to reduce the internal reflections within the antenna.. The designed antenna is implemented and tested to show inIproved characteristics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.10
• /
• pp.1077-1086
• /
• 2014

We propose a design method of a Rotman lens for curved array antenna applicable to conformal array. In this paper, design equations are derived to obtain an array curve, transmission line lengths of a Rotman lens in conjunction with a curved array antenna, and the phase error of a Rotman lens based on these design equations is minimized through the beam curve optimization procedure and the refocusing procedure. Rotman lenses designed by the proposed design equations and design procedures still maintain 3 focal points, can feed a convex or concave array antenna with circular curve, parabolic curve, V-shaped curve, etc as well as a straight line array antenna, and have minimal phase error.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.5
• /
• pp.87-93
• /
• 2011

A threat of the EMP(Electromagnetic Pulse) is recently increasing, so the development of electromagnetic security technology against the EMP is needed. However, the state of the domestic electromagnetic security technology against the EMP is lower level than the foreign. In this paper, the bounded-wave EMP simulator antenna for the development of electromagnetic security technology against a threat of the EMP is designed. The structure of the designed antenna is from a sort of the basic form of the bounded-wave EMP simulator such as a parallel-plate simulator for testing EMP immunity performance within the EUT(Equipment Under Test). The design processes of the designed simulator is including wave launcher, transmission line and termination taper. In the working volume of the designed antenna, the test object within 30 cm is forming predominant TEM field, so it is confirmed that the designed EMP simulator antenna can be used as the EMP simulator.

• Progress in Medical Physics
• /
• v.12 no.1
• /
• pp.51-58
• /
• 2001

Synchrotron radiation (SR) has several advantages over convetional x-rays, including its phase, collimation, and high flux. A synchrotron radiation beamline 5C1 at Pohang Light Source (PLS) was recently built for imaging applications. We have shown that a SR imaging system is useful in imaging microscopic structures. SR with broad-band energy spectrum were adjusted to an object by Si wafers and their energy were approximately ranging from 6 keV to 30 keV. SR were passed through an object and finally transformed into visible lights by CdWO$_4$ scintillator screen. The visible lights which were reflected at an angle of 90 degrees by gold plated mirror were detected by a CCD camera and the image data were acquired using image acquisition system. A high-resolution phantom, capacitor, adult tooth, child tooth, cancerous breast tissue, and mouse lumbar vertebra were imaged with SR imaging system. The Objects were rotated within the field of view of the CCD detector, and their projection image data were obtained at 250 steps over 180 degrees rotation. Image reconstructions were carried out in a PC by using IDLTM(Research systems, Inc., US) program. The spatial resolution of the images acquired by the SR imaging system was measured with a high-resolution chart manufactured for several micrometer resolution. The specimens were also imaged with conventional x-ray radiography system to compare the image quality of radiography obtained with the SR imaging system. The results showed more structural details and high contrast images with SR imaging system than conventional x-ray radiography system. The SR imaging system may have a potential for imaging in biological researches, material applications, and clinical radiography.