• Title/Summary/Keyword: 평지보행

Search Result 40, Processing Time 0.027 seconds

A Study on Walking Movements for Skirt Patterns with 3D Motion Analysis System (3차원 동작분석장치를 이름한 하지동작 연구)

  • Kim, Jung-Sook
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.25 no.9
    • /
    • pp.1603-1613
    • /
    • 2001
  • 본 연구는 동작분석장치를 이용하여 하지동작분석을 시도함으로서 실제 동작 시 적응 할 수 있는 의복설계를 위한 기초 자료로서 하지부 실루엣 변화의 특성을 밝히고자 하였다. 대퇴돌기점을 기준으로 본 하지동작의 진행방향 이동과 상향 방향이동을 살펴보았는데 보행유형에 따라 여유량이 특히 요구되는 부위가 각기 다르며, 부위별 필요 여유 량도 각기 다르다는 것을 알 수 있었으며 , 이러한 보행유형 별 스커트 실루엣의 특징은 기능복 설계 시 고려되어야 하겠다. 평지보행 시는 발목부위가 전면방향보다 후면방향으로 이동의 범위가 크므로 트임이나 주름이 뒷면에 있는 것이 적합하고, 계단승강이나 버스승강의 경우 무릎전면에 여유량이 필요하므로 주름이나 트임을 앞쪽에 주는 것이 바람직하며 그 길이는 대퇴돌기점 높이정도에서 시작하여야 하고 무릎아래에 있는 앞트임은 하지동작에 도움이 되지 않음을 알 수 있었다.

  • PDF

Simulation of Various Walking Based on FSR Sensor (FSR 센서를 이용한 다양한 보행 구현)

  • Noh, Gyung-Gon;Kim, Jin-Geol
    • Proceedings of the KIEE Conference
    • /
    • 2008.07a
    • /
    • pp.1793-1794
    • /
    • 2008
  • 본 연구는 다양한 환경에서의 인간형 로봇의 안정적인 보행을 하기위한 FSR (Force Sensing Resistor) 센서 기반의 보행패턴에 관한 전체 시스템의 설계와 이의 모의실험이다. 인간형 로봇의 안정적인 보행을 구현하기 위해서는 보행 패턴의 ZMP(Zero Moment Point) 궤적이 안정 영역 내에 위치하게 하여야 하고, 실제 보행 중에도 외부의 환경적인 요인과 내부의 제어 오차에 따라 보행패턴의 수정과 보완이 요구된다. 이에 FSR 센서를 적용하여 전체 인간형 로봇의 보행 시스템을 설계하고 안정적인 다양한 보행을 구현하기 위한 보행패턴을 제안한다. 이를 모의실험을 통해 평지, 계단, 경사면에 따른 보행 안정성을 검증한다. 차후 이러한 모의실험 결과를 보완하여 FSR 센서를 실제 인간형 로봇에 장착하고 실험하여 안정적인 보행을 구현할 계획이다.

  • PDF

Analysis of stair walking characteristics for the development of exoskeletal walking assist robot (외골격 보행보조로봇 개발을 위한 정상인의 계단보행특성 분석)

  • Cho, H.S.;Chang, Y.H.;Ryu, J.C.;Mun, M.S.;Kim, C.B.
    • Journal of rehabilitation welfare engineering & assistive technology
    • /
    • v.6 no.2
    • /
    • pp.15-22
    • /
    • 2012
  • The mechanical system of wearable walking assist robot needs to be optimized for adapting with human body structure and the planned control algorithm should have a secure procedure when a incongruity situation which can cause musculoskeletal injury occurs because a wearable robot is attached to a body. The understanding of walking or musculoskeletal motions characteristics must be preceeded and analyzed for developing novel wearable walking assist robot. In this study we tried to find out the capacities of powers and torques of joint actuators to design optimized performances of system and to obtain the analysis data to figure out the characteristics of joint movements during some types of walk. The major types of walk and motion are stair climbing and descending, sit-to-stand motion, and slope walking. In this study all these motions were analyzed experimentally except slope walking.

  • PDF

Data preprocessing for gait type analysis using smart insole (스마트 깔창을 이용한 보행 형태 분류를 위한 데이터 전처리 기법에 대한 연구)

  • Seo, Woo-Duk;Lee, Sung-Sin;Choi, Sang-Il
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2017.11a
    • /
    • pp.885-886
    • /
    • 2017
  • 본 연구에서는 스마트 깔창을 사용한 보행 분석을 위한 데이터 전처리 기법을 제안한다. 이를 위해 본 논문에서는 평지 보행, 오르막 보행, 내리막 보행, 계단 오르기, 계단 내려가기, 달리기, 빠른 보행의 7가지 종류의 보행 데이터를 수집하였다. 수집한 데이터에 대해 제안한 데이터 전처리 기법을 적용한 결과를 실제 걸음 수와 비교하였다. 실험결과 전처리한 결과가 실제 걸음 수에 가까운 결과를 보임을 확인하였다.

A Study on Classification Network at Edge Device for Real-time Environment Recognition of Walking Assistant Robot (보행 보조 로봇의 실시간 환경 인식을 위한 엣지 디바이스에서의 분류 네트워크에 관한 연구)

  • Shin, Hye-Soo;Lee, Jongwon;Kim, KangGeon
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2022.11a
    • /
    • pp.435-437
    • /
    • 2022
  • 보행 보조 로봇의 효과적인 보조를 위해서는 사용자의 보행 유형을 인식하는 것이 중요하다. 본 논문에서는 end-to-end 분류 네트워크 기반 보행 환경 인식 방법을 사용하여 사용자의 보행 유형을 강인하게 추정한다. 실외 보행 환경을 오르막길, 평지, 내리막길 3 가지로 분류하는 딥러닝 모델을 학습시켰으며, 엣지 디바이스에서 이를 사용하기 위해 네트워크 경량화를 진행하였다. 경량화 후 추론 속도는 약 47FPS 수준으로 실시간으로 보행 보조 로봇에 적용 가능한 것을 검증했으며, 정확도 측면에서도 97% 이상의 성능을 얻을 수 있었다.

A study on extract in gait pattern characteristic using a tilt sensor and EMG (기울기 센서와 근전도를 이용한 보행패턴 특징 추출에 관한 연구)

  • Moon, D.J.;Kim, J.Y.;Jung, H.D.;Noh, S.C.;Choi, H.H.
    • Journal of rehabilitation welfare engineering & assistive technology
    • /
    • v.7 no.2
    • /
    • pp.75-84
    • /
    • 2013
  • In this study, the patterns and characteristics according to gait cycle were analyzed using to EMG signals during walking, and analyzed in the time domain and frequency domain. The experiments was performed divide to level-ground walking and stair walking, and gait cycle was analysis by stance and swing. In the sagittal plane by using the tilt sensor measures the angle of the lower leg, and EMG was measured from the quadriceps and biceps femoris. The tilt of the lower leg was showed the biggest tilt at HS, and showed lowest value at TO. All in walking according to the gait cycle IEMG showed a specific pattern, and is expected useful to determine the gait cycle and kind. In the frequency domain analysis was using STFT on able to frequency analysis according to time, and using the tilt sensor was identify gait cycle. We analyzed also spectrum of the results of the STFT in all gait types, and recognized that stance had broad bandwidth than that of swing. Through this study, it was confirmed the possibility of judgment and analysis of the gait cycle using EMG and the tilt in the sagittal plane of the lower leg. When used it, can improve the quality of life of amputation patients

  • PDF

Stairs Walking of a Biped Robot (2족 보행 로봇의 계단 보행)

  • 성영휘;안희욱
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.5 no.1
    • /
    • pp.46-52
    • /
    • 2004
  • In this paper, we introduce a case study of developing a miniature humanoid robot which has 16 degrees of freedom, 42 cm heights, and 1.5kg weights. For easy implimentation, the integrated RC-servo motors are adopted as actuators and a digital camera is equipped on its head. So, it can transmit vision data to a remote host computer via wireless modem. The robot can perform staircase walking as well as straight walking and turning to any direction. The user-interface program running on the host computer contains a robot graphic simulator and a motion editor which are used to generate and verify the robot's walking motion. The experimental results show that the robot has various walking capability including straight walking, turning, and stairs walking.

  • PDF

The Comparison of Characteristics of Foot pressure between Treadmill and Ground walking in Normal person (정상인의 평지보행과 트레드밀 보행 시 족저압의 특성 비교)

  • Kim, Ji-Hye;Oh, Tae-Young
    • Journal of the Korean Society of Physical Medicine
    • /
    • v.5 no.1
    • /
    • pp.53-61
    • /
    • 2010
  • Purpose : The purpose of this study is to compare the distribution of foot pressure, knee and ankle joint angle between treadmill walking and ground walking in normal person. Methods : 18 Person of subject has participated this study, let subject to walk in ground and treadmill in order to gain data of foot distribution and knee, ankle joint angle using by parotec system. and Dartfish system. Walking velocity was constrained by 2Km/h and more 10sec. Date analysis was used by paired-t test using SPSS/PC statistical programs for window. Results : Result show that total contact times has shown symmetry between both legs, and more increase of left foot pressure in treadmill walking. Foot pressure of treadmill walking was significantly decreased in right hind foot and fore foot and hallux area. The ankle joint angle of treadmill walking was significantly decreased in initial contact phase. Conclusion : Results of this study show that foot pressure of treadmill walking was more decreased than ground walking in right hind foot and fore foot, hallux area. And the ankle joint angle of treadmill walking was significantly decreased in initial contact phase.