• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.9
• /
• pp.785-795
• /
• 1990

For the far field radiation pattern of a microstrip array antenna which is conformed to a cylindrical surface and forms an arc array, an approximate analysis method using FOURIER TRANSFORM is presented. In this method, the conformal array antenna is projected on the effective aperture plane and assumed to be an aperiodic array with nonlinear phase tilt. The effective aperture plane includes four end-points of each arc on the cylindrical surface. When the effective aperture ratio which is normalized to the planar type is from 1.0 to 0.9, it is confirmed that this approximate method is valid. To the array on the effective aperture plane, it is assumed that the phase tilt is due to the distance between aperture plne and curvature surface. Specially, when the radius of arc is more than 5 times to its length, the FOURIER TRANSFORM METHOD could be used with only varying scale factors. The results of calculating by approximate method are good agreement with the results of COORDINATE TRANSFORM METHOD and experimentally measured value in the range of -40dB. And, the difference of half power angle is less than 5 degrees when the effective aperture ratio moer than 0.9.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.215-220
• /
• 2016

In this paper, a wideband antenna accomplished by adding a double sleeve of a rectangular planar monopole structure is proposed. In order to impedance matching of proposed antenna, the antenna performance was improved by adding two gap sleeves and outer sleeve for double sleeve structure. HFSS simulator of ANSYS corp. was used in order to confirm the antenna parameter characteristic. According to the simulation results, the VSWR was less than 2 for the range of 2.5GHz~10.5GHz. The frequency bandwidth is 8GHz. The frequency range of the actual fabricated antenna was 2.92GHz~10.32GHz, the frequency bandwidth is 7.4GHz. The measured radiation pattern frequency is 3GHz, 6GHz and 9GHz. The results are similar with dipole antenna pattern in all frequency. The antenna size is $40{\times}40mm^2$. The utilization possibility of the ultra-wideband planar monopole antenna could be confirmed according to compare and analyze the simulation and measurement data.

• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.549-555
• /
• 2011

In this paper, inverted triangle structural planar monopole antenna with Edge for UWB Communication (3.1 ~ 10.6 GHz) is presented. The antenna have broadband property structurally through inverted triangle structural planar monopole which have edge. Monopole and ground of proposed antenna exist on coplanar plane, and excite as CPW. It used FR4 dielectric substrate of ${\epsilon}_r=4.4$, and the size is $20{\times}20{\times}1.6mm$. Return loss is more than - 10dB in 3.1 ~ 10.1 GHz (7.0 GHz). Radiation pattern is about the same that of dipole antenna at all frequency. At measured result, max gain is 8.44 dBi at E - plane.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.05a
• /
• pp.195-198
• /
• 2002

본 논문에서는 영상 해석 알고리즘의 하나인 원형 패턴 벡터 알고리즘과 퍼지 추론을 사용하여 손가락으로 커서를 제어하는 인터페이스를 구현하였다. 최대 원형 이동법을 이용하여 물체의 무게 중심점을 찾아서 그 점에서 원형 패턴 알고리즘을 적용하면 외곽가지 거리 스펙트럼을 추출할 수 있다. 손에 대한 조건을 제시하여 일치하는 스펙트럼이 추출되면 손으로 인식하게 하였다. 커서의 방향제어는 크게 수평 방향과 수직 방향으로 나눌 수 있다. 커서의 수평 방향은 거리 스펙트럼에 의해 지시 손가락 부분을 찾아서 평면 좌표로 해석하여 제어 하였고, 커서의 수직 방향은 최대 원형의 크기와 손의 최대 크기를 입력 받아 퍼지 추론하여 커서의 위치를 제어 하였다. 퍼지 추론을 이용함으로써 기존의 불연속적인 커서의 수직 방향 제어를 좀 더 유연하고 연속적으로 제어 할 수 있었다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.12a
• /
• pp.173-176
• /
• 2001

본 논문은 영상 해석 알고리즘의 하나인 원형 패턴 벡터 알고리즘을 이용하여 손가락으로 커서를 제어하는 시스템을 구현하였다. 이 알고리즘을 적용하기 위하여 영상에서 손 영역에만 해당하는 최대 원을 여러 개 그린 후 가장 큰 원의 중심점을 무게 중심점으로 사용하였으며, 무게 중심점에서 손의 외곽까지의 거리를 구하여 가리키는 손가락을 찾도록 하였다. 화면상의 커서의 수평 방향은 가리키는 손가락 방향을 이용하여 평면 좌표로 해석하여 제어하였고, 수직 방향은 모니터 중앙 상단에 한대의 카메라를 사용하였기 때문에 손가락 길이를 이용하여 불연속적으로 상-중-하의 세 영역으로 제어하였다. 수직 방향의 커서이동이 불연속적이기 때문에, 구축한 인터페이스 화면의 범위를 축소한 후 축소된 범위를 전체 화면으로 확대해 나감으로써 사용자가 원하는 목표지점으로 커서를 이동시킬 수 있다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.2
• /
• pp.7-13
• /
• 1982

In this Paper, the radiation Patterns of long wire antennas are computed by applying Dyadic Green's Function to the propagation vector, This result is used to analyze the polarized radiation patterns for the various geometrical structures of the bent dipole antennas. When the ratio of the vertical portion over the total length of the bent dipole antenna is 0.4major angle and axail ratio are changed most sensitively for the azimuth rotation, and the radiation field propagates strongly perpendicular to the bent antenna plane.

• Korean Journal of Optics and Photonics
• /
• v.2 no.2
• /
• pp.83-88
• /
• 1991

Studies on space-invariant pattern recognition have been carried out from various approaches. Pattern recognition system using SDF filter, from weighted linear summation of tranining images, has been the focus of research since its first appearence. In this thesis, off-axis pSDF spatial matched filter has been constructed by combining angular multiplexing of off-axis reference plane wave with pSDF filter made from pseudo-inverse algorithm, and transformed to phase only filter. From observation of the correlation responses in the correlation plane, it is shown that proposed off-axis pSDF spatial matched filter is available to pattern classification and can be used for optical correlator.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.05a
• /
• pp.673-676
• /
• 2006

본 논문은 산업현장의 불균등한 조명 조건에서 정확한 카메라 교정을 수행할 수 있는 방법을 제안한다. 비접촉 계측을 위한 카메라 교정법은 패턴에서 교정점들을 정확하게 추출할 수 있어야 하며, 평면 패턴을 사용하는 교정 방법은 최소 7개의 교정점을 알아야 한다. 그러나 비접촉 치수 계측기가 설치된 산업현장에서 카메라 교정에 알맞은 조명을 기대하기 힘들다. 본 논문에서는 최적조명제어가 어려운 산업현장에서 치수계측을 위한 카메라 교정을 효과적으로 수행할 수 있는 반자동 카메라 교정방법을 제안한다. 교정패턴상의 최소 4점을 사용자가 지정함에 의해, 조명제어의 어려움으로 인해 교정점 추출이 실패한 교정패턴의 불완전 교정점을 사용하여 이상적인 조명상태에서의 교정점 정보를 예측하고, 이 정보로부터 다시 정확한 교정인자들을 반복적으로 추출하는 방법을 적용한다. 제시된 방법은 렌즈의 투사왜곡에 의한 교정패턴에서도 성공적으로 적용될 수 있음을 실험을 통해 확인하였다.

• Journal of KIISE:Software and Applications
• /
• v.31 no.4
• /
• pp.478-487
• /
• 2004

We had proposed the RPA(Recursive Partition Averaging) method in order to improve the storage requirement and classification rate of the Memory Based Reasoning. That algorithm worked not bad in many area, however, the major drawbacks of RPA are it's partitioning condition and the way of extracting major patterns. We propose an adaptive RPA algorithm which uses the FPD(feature-based population densimeter) to stop the ARPA partitioning process and produce, instead of RPA's averaged major pattern, optimizing resulting hyperrectangles. The proposed algorithm required only approximately 40% of memory space that is needed in k-NN classifier, and showed a superior classification performance to the RPA. Also, by reducing the number of stored patterns, it showed an excellent results in terms of classification when we compare it to the k-NN.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.3
• /
• pp.309-316
• /
• 2015

A state-based peridynamic model is able to describe a general constitutive model from the standard continuum theory. The response of a material at a point is dependent on the deformation of all bonds connected to the point within the nonlocal horizon region. Therefore, the state-based peridynamic model permits both the volume and shear changes of the material which is promising to reproduce the complicated dynamic brittle fracture phenomena, such as crack branching, secondary cracks, cascade cracks, crack coalescence, etc. In this paper, the two-dimensional state-based peridynamic model for a linear elastic plane stress solid is employed. The damage model incorporates the energy release rate and the peridynamic energy potential. For brittle glass materials, the impact of the crack-parallel compressive stress waves on the crack branching pattern is investigated. The peridynamic solution for this problem captures the main features, observed experimentally, of dynamic crack propagation and branching. Cascade cracks under strong tensile loading and secondary cracks are also well reproduced with the state-based peridynamic simulations.