• Social Workers
• /
• no.8 s.40
• /
• pp.4-11
• /
• 2005

현대사회에서 내 집 마련은 가정의 안정적 유지를 위한 기본적 요소이다. 그러나 지난 5월 통계청에서 발표한 '1/4분기 가계수지 동향'을 기준으로 가계소득 329만 1,000원인 도시근로자가 대출이나 부모의 도움 없이 저축만으로 내 집을 마련하는데 걸리는 기간은 서울 25평 아파트 20년 9개월, 32평형은 27년 5개월 걸리는 것으로 집계됐다. 그렇다면 '사회복지'라는 커다란 영역안에는 어떠한 형태의 집들이 존재할까? 우리나가 거의 대부분의 사회복지기관, 시설들은 지방자치단체에 의해 법인에게 위탁, 임대되어지는 것이 대부분이다. 물론 국가가 법인직영의 반위탁 형태로 운영되는 곳도 있지만 아주 극소수이다. 우리나라 지역복지의 핵심 주체인 지역사회복지관의 경우(한국사회복지관협회, 2005) 사회복지법인 289개소, 재단법인 47갯, 사단법인 9개소, 학교법인 22개소, 지방자치단체 직영이 14개로, 거의 대부분의 복지관이 민간위탁으로 운영되고 있다. 대부분이 전세집살이를 하고 있는 것이다. 이번호에서는 이러한 민간위탁의 미흡한 제도와 과정에 대한 현장의 소리를 들업고자 한다.

• Journal of the Korean Data and Information Science Society
• /
• v.8 no.2
• /
• pp.153-161
• /
• 1997

A Korean exporience life table(male) is constructed by using a mixture of weighted moving average(WMA) model and Gompertz' parametric survival model based on 25,000,000 insured of major 6 life insurance companies from 1988 to 1992. The graduated values are taken as those which minimize the composite measure of fittness and smoothness. Moreover, we propose closed form estimators for three parameters of Gompertz' model.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.846-851
• /
• 2004

A new method has been proposed for the calibration of frictional forces in atomic force microscopy. Angle conversion factor is defined using the relationship between torsional angle and frictional signal. Once the factor is obtained from a cantilever, it can be applied to other cantilevers without additional experiments. Moment balance equations on the flat surface and top edge of a commercial step grating are used to obtain angle conversion factor. Proposed method is verified through another step grating test and frictional behavior of Mica.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.3
• /
• pp.86-92
• /
• 2016

Mechanical milling, in association with electrical discharge machining (EDM) for hybrid machining, is presented in this paper. An end mill cutting tool, an electrode of the EDM, was used for the system. That means that some parts were cut by the mechanical cutting process and others by the EDM. The possibility of combining both processes was simulated with the cutting simulation software. In addition, the machining reality was verified by measuring the electrical signal from the EDM power supply, which was measured in time and frequency domains. From this initial research, the hybrid machining system proposed in this paper appears to be well suited for difficult to cut material processing.

• Journal of Environmental Impact Assessment
• /
• v.10 no.4
• /
• pp.297-304
• /
• 2001

Recently the road traffic noise has appeared as a significant environmental issue because of dramatic increase of vehicles and expansion of newly constructed road. Therefore, this study proposes the method that improves prediction factors and models through analysis of the existing road traffic noise prediction model. Prediction factors can be improved by establishing guideline for diffraction attenuation and applying daily traffic discharge, peak traffic discharge, and average traveling speed through an analysis of level service. Prediction must be made by periods of one or five years during 20 years. Prediction models also can be improved to include better prediction model through setting the database, establishing functional relation between physical properties and noise levels by acoustic analysis, and developing models for road traffic noise prediction in residential areas.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.6
• /
• pp.9-16
• /
• 2012

It is often thought that when a fire is found in parked motor vehicles, the fire may occur after an engine stops. Also, it is easy to judge that when motor vehicle fires occur during engine stopping, it may be caused by arson or electrical causes irrespective of a fuel system. This study analyzed motor vehicle fires which occurred in operation but were found after parking and revealed that these fires were caused by the defect of a fuel system and the same motor vehicle types had fires by the same causes. Moreover, this study provided judgement process of major fire causes and periods for fire investigators to apply when investigating fires of parked motor vehicles. And this fire is related to automotive products liability.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.6
• /
• pp.92-99
• /
• 2012

It is often thought that because no-start motor vehicles cannot start an engine, a fire cannot occur for motor vehicle causes. However, although the engine cannot start up, some parts may be live with electricity if a battery is connected. If the parts have problems, a fire can occur. This study analyzed the causes of fires occurring when a motor vehicle was loaded onto a tow truck to service no-start. It is suggested that no-start motor vehicles should separate a battery terminal to prevent a fire. And this fire is related to automotive products liability.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1998.10a
• /
• pp.92-94
• /
• 1998

최근 도시근교 시설재배토양의 염류 과다집적과 연작장해 발생으로 생산성이 저하되고 있다. 그리고 고품질 연중생산이 가능한 양액 재배 면적이 '93년 23ha에서 '97년 414ha로 급속히 증가되고 있는데 이 중 약12%가 담액경이나 박막수경의 순수 수경재배 방식이 차지하고 있다. 순환식 담액수경 상추재배를 기준으로 할 때 농가 300평 재배시 약 100ton의 양액이 소요되며 이 양액은 1회 재배가 끝난 후 상당량이 폐기되고 있고 고형 배지경 양액 재배의 경우에도 대부분 비 순환식 재배로 1회 관수 후 나오는 배액이 그대로 버려지고 이어 토양 및 지하수 등 환경오염, 자원 낭비 등의 여러 가지 문제를 야기시키고 있다. (중략)

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.199-204
• /
• 2006

Airborne LIDAR systems have been increasingly used for various applications as an effective surveying mean that can be complementary or alternative to the traditional one based on aerial photos. A LIDAR system is a multi-sensor system consisting of GPS, INS, and a laser scanner and hence the errors associated with the LIDAR data can be significantly affected by not only the errors associated with each individual sensor but also the errors involved in combining these sensors. The analysis about these errors have been performed by some researchers but yet insufficient so that the results can be critically contributed to performing accurate calibration of LIDAR data. In this study, we thus analyze these error sources, derive their mathematical models and perform the sensitivity analysis to assess how significantly each error affects the LIDAR data. The results from this sensitivity analysis in particular can be effectively used to determine the main parameters modelling the systematic errors associated with the LIDAR data for their calibration.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.223-228
• /
• 2006

Monitoring structures is important to maintain the safety and serviceability of the structures. The maximum displacement in the structure should be precisely and frequently monitored because it is a direct assessment index indicating its stiffness. However, no practical method has been developed to monitor such displacement precisely, particularly for high-rise buildings and long span bridges because they cannot be easily accessible. To overcome such difficult accessibility, we propose to use a LIDAR system that remotely samples the surface of an object using laser pulses and generates the coordinates of numerous points on the surface. By analyzing the LIDAR points sampled from the surfaces of a deformed structure, we can precisely determine the displacement of the structure. In this study, we thus develop a novel method based the LIDAR system and perform an indoor experiment to prove its performance. This experimental results strongly supports that the displacement measurement using the LIDAR system are enough accurate to be used for structural analyses.