• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.10
• /
• pp.713-722
• /
• 2013

This paper proposes a method of using depth information to detect the hand region in real-time based on the cascade method. In order to ensure stable and speedy detection of the hand region even under conditions of lighting changes in the test environment, this study uses only features based on depth information, and proposes a method of detecting the hand region by means of a classifier that uses boosting and cascading methods. First, in order to extract features using only depth information, we calculate the difference between the depth value at the center of the input image and the average of depth value within the segmented block, and to ensure that hand regions of all sizes will be detected, we use the central depth value and the second order linear model to predict the size of the hand region. The cascade method is applied to implement training and recognition by extracting features from the hand region. The classifier proposed in this paper maintains accuracy and enhances speed by composing each stage into a single weak classifier and obtaining the threshold value that satisfies the detection rate while exhibiting the lowest error rate to perform over-fitting training. The trained classifier is used to classify the hand region, and detects the final hand region in the final merger stage. Lastly, to verify performance, we perform quantitative and qualitative comparative analyses with various conventional AdaBoost algorithms to confirm the efficiency of the hand region detection algorithm proposed in this paper.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.4
• /
• pp.65-73
• /
• 2002

It has been recognized that the damage control must become a more explicit design consideration. In an effort to develop design methods based on performance it is clear that the evaluation of the nonlinear response is required. The methods available to the design engineer today are nonlinear time history analyses, monotonic static nonlinear analyses, or equivalent static analyses with simulated nonlinear influences. Some building codes propose the capacity spectrum method based on the nonlinear static analysis(pushover analysis) to determine the earthquake-induced demand given by the structure pushover curve. These procedures are conceptually simple but iterative and time consuming with some errors. This paper presents a nonlinear direct spectrum method(NDSM) to evaluate seismic performance of structures, without iterative computations, given by the structural initial elastic period and yield strength from the pushover analysis, especially for MDF(multi degree of freedom) systems. The purpose of this paper is to investigate the accuracy and confidence of this method from a point of view of various earthquakes and unloading stiffness degradation parameters. The conclusions of this study are as follows; 1) NDSM is considered as practical method because the peak deformations of nonlinear system of MDF by NDSM are almost equal to the results of nonlinear time history analysis(NTHA) for various ground motions. 2) When the results of NDSM are compared with those of NTHA. mean of errors is the smallest in case of post-yielding stiffness factor 0.1, static force by MAD(modal adaptive distribution) and unloading stiffness degradation factor 0.2~0.3.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.1
• /
• pp.28-38
• /
• 2004

The purpose of this study is to analyze the urban hydrologic state by the use of GIS, resolution and interpolation. The determination coefficient($R^2$) and Regression Formula were derived from the contour of digital map for the accuracy, and DEM data was made by using TIN interpolation by the size of the grid. By using the observed DEM data, topographical factors were extracted from the small basin, size, the width of a basin and the slope, and were applied in the urban runoff model. Through the model, we tried to find out the most suitable runoff model in a small basin of Yosu-Munsu area. As a result of applying models to the drainage considered, the runoff hydrograph estimated by SWMM model was closer to the observed one than that estimated by ILLUDAS model. The difference between the runoff hydrograph by SWMM and the observed one is maximum error of 19%, minimum error of 5% and average error of 13%. The influence of duration in contrast to pick time is insignificant in a urban small basin. As a conclusion of this study, SWMM model was more suitable and applicable for the urban runoff model than ILLUDAS model due to its accuracy and various abilities.

• Korean Journal of Social Welfare Studies
• /
• v.48 no.4
• /
• pp.59-89
• /
• 2017

Changes in the public welfare attitudes are very important to the welfare politics and policy. Considering that variability of public welfare attitudes has been ignored in previous studies, we analyzed welfare attitudes changes at individual level in Korea. Using the longitudinal data from the Additional Survey of 2010/2013/2016 Korea Welfare Panel Survey, we analyzed the changes in public welfare attitudes during 2010th-2016th years. Major findings are as follows. First, one of the findings from analysis is that the public welfare attitudes are very active and dynamic in Korea. This finding is contradiction to the results of the previous researches that are point to the stability or inertia of the public welfare attitudes in western welfare states and also in Korea. Second, occurrences of the welfare attitudes change are related with various individual characteristics; income status, occupation status, age, region, sex, political ideology, etc. These results from this study on the welfare attitudes change suggest that dynamics of the Korea welfare politics in recent years reflected the dynamic changes in public welfare attitudes. And, they suggest that Korea welfare politics are transformed from the traditional classes welfare politics to the new welfare politics which are influenced by various interests of the socio-demographic groups.

• Journal of Korea Water Resources Association
• /
• v.52 no.10
• /
• pp.671-680
• /
• 2019

Many researches illustrated that the magnitude and frequency of hydrological event would increase in the future due to changes of hydrological cycle components according to climate change. However, few studies performed quantitative analysis and evaluation of future rainfall in North Korea, where the damage caused by extreme precipitation is expected to occur as in South Korea. Therefore, this study predicted the extreme precipitation change of North Korea in the future (2020-2060) compared to the current (1981-2017) using stationary and nonstationary frequency analysis. This study conducted nonstationary frequency analysis considering the external factors (mean precipitation of JFM (Jan.-Mar.), AMJ (Apr.-Jun.), JAS (Jul.-Sept.), OND (Oct.-Dec.)) of the HadGEM2-AO model simulated according to the Representative Concentration Pathway (RCP) climate change scenarios. In order to select external factors that have a similar tendency with extreme rainfall events in North Korea, the maximum annual rainfall data was obtained by using the ensemble empirical mode decomposition (EEMD) method. Correlation analysis was performed between the extracted residue and the external factors. Considering selected external factors, nonstationary GEV model was constructed. In RCP4.5, four of the eight stations tended to decrease in future extreme precipitation compared to the present climate while three stations increased. On the other hand, in RCP8.5, two stations decreased while five stations increased.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.46-46
• /
• 2015

강우가 지역별 계절별로 편중되어 있는 우리나라는 수자원의 안정적인 확보와 이용을 위해 다양한 형태의 댐을 건설하여 운영하고 있다. 그러나 대부분의 댐건설을 통해 형성된 저수지들은 탁수 장기화 및 녹조 발생 등의 환경, 생태적인 문제를 겪고 있으며, 그에 따른 사회적 우려로 인해 신규댐 건설을 통한 수자원확보는 더 이상 어려운 실정이다. 이러한 문제에 대응하기 위한 대안으로 기존 댐 저수지들(안동호-임하호)의 구조적 연계운영방안이 진행되고 있다. 본 연구의 목적은 2차원 CE-QUAL-W2모형을 활용하여 안동호와 임하호의 구조적 연결에 따른 탁수의 이동과 각 저수지 내에서의 유동 변화를 해석하는데 있다. 저수지 연계 시나리오는 EL. 138 m 위치에 길이 2 km, 직경 5.5 m 의 콘크리트관(마찰계수 0.05)이 안동호 좌안인 임동면 마리와 임하호 우안 망천리를 연결하는 것으로 가정하였다. 모델의 보정은 실측자료가 풍부한 2006년도 수문사상을 대상으로, 개별 저수지에 대해 수행하였고, 탁수 유동 시나리오 해석은 임하호에 심각한 탁수장기화 문제가 발생했던 2002년을 대상으로 댐 연계 탁수모의를 수행하였다. 안동호와 임하호의 댐 앞에서 모의값과 실측값을 오차를 분석한 결과 탁수예측오차는 AME 0.5~24 mg/L, RMSE 0.7~30.2mg/L의 범위로 비교적 실측값을 잘 반영한 것으로 나타났다. 임하댐의 경우 탁수층의 위치와 두께, 그리고 최고 탁도값을 적절히 재현 하였지만, 안동댐은 최고 탁도값 예측에서 다소 오차가 발생하는 것으로 나타났다. 안동호와 임하호 단독 운영시와 연계 운영시의 탁수변화 파악을 위해 초기 홍수사상이 발생한 8월 이후부터 저수지내의 TSS농도 분포를 비교하였다. 안동호의 경우 댐앞지점의 탁수분포는 수온성층구조에 영향을 받아, 단독 운영시(EL. 130 m)보다 연계운영시(EL. 140 m)에 탁수의 중심이 높은 위치에 형성되었다. 단독 운영시 10월 이후에 전도현상으로 인해 침강되지 않은 잔류 탁수층이 저수지 하부로 확산되었지만, 연계 운영시에는 재부상 되어 상층으로 확산되는 것으로 모의되었다. 또한 연계운영시 유량이동으로 인해 안동호의 탁수 댐앞 도달시간이 짧아지는 것으로 나타났다. 반면 임하호는 연계 운영시 안동댐으로 유출이 생기면서 중층에서 탁수량이 저감되는 것으로 모의되었다. 저수지 내 탁수량 분석을 위해 SS 15 mg/L 이상의 잔류 탁수량을 분석한 결과, 연계운영시 안동호의 평균 잔류탁수량 비율은 11.8% 증가, 임하호의 경우 11.7% 감소하였다. 또한, 탁수의 댐하류 방류일수도 SS 15 mg/L 기준 임하호 9일 저감, 안동호는 70일 증가하여 임하호의 탁수가 안동호의 탁수 장기화에 영향을 주는 것으로 나타났다.

• Geophysics and Geophysical Exploration
• /
• v.13 no.2
• /
• pp.153-158
• /
• 2010

To investigate the velocity structure in the central and southern parts of the Korean peninsula, a 299-km NW-SE seismic refraction profile KCRT-2008was obtained across major tectonic boundaries. Seismic waves were generated by detonating 250 ~ 1500 kg explosives at depths of 50 ~ 100 m in eight drill holes located at intervals of 21 ~ 113 km. The seismic signals were detected by 4.5 Hz geophones at a nominal interval of 500 m. The first-arrival times were inverted to derive a velocity tomogram. The raypaths indicate several mid-crust interfaces including those at approximate depths of 2 ~ 3, 11 ~ 13, and 20 km. The Moho discontinuity with refraction velocity of 7.7 to 8.1 km/s has a maximum depth of 34.5 km under the central portion of the peninsula. The Moho becomes shallower as the Yellow Sea and the East Sea are approached on the west and east coasts of the peninsula, respectively. The depth of the 7.6 km/s velocity contour varies from 31.3 km to 34.4 km. The velocity tomogram shows the existence of a 129 km wide low-velocity zone centered at 7.2 km depth under the Okchon fold belt and Gyeonggi massif and low-velocity(< 5.4 km/s) rocks in the Gyeongsang sedimentary basin with a maximum thickness of 2.6 km

• Proceedings of the SOHE Conference
• /
• 1999.10a
• /
• pp.85-101
• /
• 1999

새천년에 대한 미래를 생각해보면 우리에게 회망과 동시에 웬지 모를 불안올 주기도 한다. 발전지향적으로 살아 온 우리 인간의 지혜로 말미암아 현대에 살고 있는 우리는 과 거 우리 조상 어느 시대 못지 않게 첨단 과학 기술의 혜택으로 물질적 풍요와 함께 사 상적으로도 신분계급이나 남녀문제나 이데올로기의 극심한 차별이 사라져가는 그야말 로 자유스러운 생활올 맛보고 있다. 그러나 한편으로는 이러한 혜택과 이익을 얻는 대 신 지나친 물질의 생산과 사용의 과다는 우리 환경을 파괴하고 나아가 정신적으로도 물질의 지배를 받게 되는 즉, 물질의 소유와 사용에 따른 삶과 사람의 평가가 횡행하 는 기이한 구조에 우리 자신도 모르는 사이에 말려 들어가 피폐된 정신환경의 진행을 우려하지 않올 수 없다. 누구든지 공감하는 이러한 부분이 아마도 다가올 21세기에 대 한 불안이 아닐까 생각한다. 우리의 주거생활도 반세기도 채 안되는 이 시점에 그동안 놀라운 변모를 거듭하여 비교적 선진국과 가까운 수준에 육박하고 있다. 그렇다면 지금 이 시점에서 다가올 주 생활에 대한 이야기는 잘못되어지는 불안을 막고 더 멋지고 쾌적한 주거환경올 창출하 여 주거의 질을 높히기 위한 선도적 쟁점이 되어야 할 것이다. 이러한 의미에서 본고 에서는 새천년의 주거생활문화에 대한 주제를 거시적이고 개념적인 정책적 내용보다는 생활과학의 한 맥락에서 미시적이고 구체적이며 실천지향적인 뜩변에서 나아가야 할 쟁점이 무엇인지를 함께 생각해 보고자 하며 학술 이론적 내용보다는 평이한 사례를 중심으로 함께 생각해 보고자 한다. 밝혀졌다. 그러나, 생산계획시스템에서 1주 간격으로 계획오더를 이송할 때는 Order Release 방법을 적용하여 작업현장에서의 평균 리드타임과 리드타임의 변동, 공정중재고가 줄어드는 결과를 보였고, 가동률 수준이 높을수록 ORR 방법간의 차이가 크게 나타났다. 그리고 부하평준화 기능은 Order Release 정책의 유효성에 별 영향을 주지 않는 것으로 나타났다. 결론적으로, Order Release 방법은 우선순위규칙간의 성능차이를 줄이거나, 대체할 수 통제 기법이라기보다는 우선순위규칙을 보완하여 공정중재고와 작업현장에서의 리드타임, 리드타임의 편차를 줄여주는 역할을 한다고 볼 수 있다. 그리고, 계획시스템이 존재하여 계획오더가 일정기간간격으로 이송되는 환경에서 특히 유용하다는 결론을 얻었다. 알 수 있었다. 것인데, 제조업에서의 심각한 고비용, 저효율 문제 를 해결하기 위해 필수적으로 도입해야만 하는 실정이다. 또한 소비자의 다양한 요구로 인 하여 제품의 종류와 사양면에서 심한 변동을 보이는 시장 수요에, 신속한 정보처리로 대응 하는데도 크게 기여하고 있다. 이에 본 연구에서는, 자동차 Job Shop의 동기화 생산방식을 지원하는 동기화 생산시스템의 구축 모델을 제시하고자 한다.과로 여겨지며, 또한 혈청중의 ALT, ALP 및 LDH활성을 유의성있게 감소시키므로서 감잎 phenolic compounds가 에탄올에 의한 간세포 손상에 대한 해독 및 보호작용이 있는 것으로 사료된다.반적으로 홍삼 제조시 내공의 발생은 제조공정에서 나타나는 경우가 많으며, 내백의 경

• The Journal of the Petrological Society of Korea
• /
• v.23 no.3
• /
• pp.279-292
• /
• 2014

Nd isotopic compositions analyzed from the Phanerozoic granitoids of Korea are integrated and discussed. Variations in Nd isotopic compositions can be explained either by temporal trend or by regional differences. Among the three active periods, first two periods during the Permian-Triassic and Jurassic seem to show variations from rather high ${\varepsilon}_{Nd}(t)$ values at the beginning to lower ${\varepsilon}_{Nd}(t)$ values during the later stages. Such trends probably reflect melting of the subducting oceanic crust and producing magma with higher proportion of depleted mantle derived materials during the early stage of subduction process, and subsequent magmas with greater proportion of old continental crust with progress of subduction. However, the Cretaceous-Paleogene period of active magmatism displays higher ${\varepsilon}_{Nd}(t)$ values during the advanced stage of the igneous activities, which is opposite to the previous active periods. The other explanation is that such differences in ${\varepsilon}_{Nd}(t)$ reflect regional differences, based on the observations that such high-${\varepsilon}_{Nd}(t)$ granitoids distribute in the northeastern Gyeongbuk Province and Gyeongsang Basin. If this is the case, the regions with highr ${\varepsilon}_{Nd}(t)$ values may have distinct crustal evolution histories, e.g. younger average age. The choice between the two hypothesis could be made through further studies.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.1
• /
• pp.42-54
• /
• 2001

The use of nitrogen fertilizer in intensive agricultural production is of major concern due to its role on agricultural productivity and water quality. Crop production inputs on farm are usually applied at a uniform rate across an entire field. However, actual input requirements often vary within fields. The field variations in yield potential, soil moisture, soil N status, and the efficiency of fertilizer use, uniform application of crop production inputs does not allow optimum efficiency or profitability. This occurs because uniform application often results in areas of over- and under-application which may affect water quality and crop yield. This study used biophysical and economic models to assess the economic feasibility and water quality benefits of site specific nitrogen management for 10 soil types and 35 sample fields in Goodwater Creek watershed located near Centralia, Missouri. Results showed that the economic feasibility and water quality benefits of variable rate application were sensitive to the distribution of soil types within a field. Variable rate(VR) application was not uniformly more profitable than uniform rate(UR) application for the four agricultural systems evaluated and the water quality benefits were insubstantial relative to uniform application of N.