• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.6
• /
• pp.394-399
• /
• 2013

The recalcitrant hairs which are accumulated in the U-trap equipped to prevent the stench from the drainage produce the phenomenon of blocking the flow of water through the home drainage pathway. The chemical dissolution solutions commercially manufactured are excessively poured into U-trap to solve this blocking problem. In this study, the specially designed instrument was developed for the experiments to cut and crush the hairs of which main component are the recalcitrant keratin proteins. The performance of the instrument for cutting and crushing hairs was investigated using experimental methods. The cutting and weighing method was used in order to obtain the average length of a large amount of hairs cut by instrument. This method is relatively simple to measure the weight of cutting hairs to obtain the average length of the fibers, the values of average length showed not greater tolerances. Also the average cutting number was defined to evaluate the performance of the cutting and crushing instruments designed for this study. We were able to apply these evaluation methods to provide the criteria to obtain the optimal structure of instrument and proper operation time in the given experimental conditions. These experimental methods and results will provide the good example to design and to analyze the various device that can be used for cutting the fibers. The cutting and crushing instrument developed in this study showed the effective abilities to cutting the hairs. The general using the cuttting and crushing instrument at every home would be helpful to prevent water environmental pollution.

• Journal of Plant Biotechnology
• /
• v.30 no.4
• /
• pp.347-352
• /
• 2003

This work was undertaken to study the effect of stigmatic and cut-style pollination on self seed set in Lilium longiflorum and L. ${\times}$ formolongi, and their crosses as the female parent with other cultivars/genotypes. Stigmatic pollination of L. longiflorum cv. Gelria and Lorina resulted in cent per cent fruit set with mean number of seeds/fruit of 189 and 70, respectively. However, cut-style pollination resulted in 87％ and 40％ fruit set in Gelria and Lorina, respectively. The corresponding mean number of seeds/fruit was 53 and 20. In L. ${\times}$ formolongi, stigmatic pollination set 80％ fruits with 736 seeds/fruit. On the other hand, cut-style pollination resulted in 47％ fruit set with 81 seeds/fruit. The intraspecific stigmatic pollination of L. longiflorum cv. Gelria and Lorina with other cultivars formed 60％ fruits with a mean number of 18 seeds/fruit. However, only 20％ fruit set with mean number of seeds/fruit of 7 was recorded when cut-style pollination of L. longiflorum cultivar were pollinated with other cultivars/genotypes. In the intraspecific pollination of L. ${\times}$ formolongi cv. Raizan with Novia, fruit set resulting from stigmatic and cut-style pollination was 75％ and 50％, respectively with the corresponding mean number of seeds/fruit of 579 and 98. It was concluded that self as well as intraspecific seed set in the two species of Lilium gets considerably reduced as a result of cut-style pollination.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.1
• /
• pp.15-30
• /
• 1996

저작은 치아, 악골, 저작근 뿐만 아니라 근 신경계, 고위 중추까지 복합적으로 관여되는 기능적 행위이다. 저작 형태는 다양한 모양을 가지나 두 가지 전형적인 군, 즉, 전방에서 관찰 시 그 양상이 수직적이며 절단 (chopping) 운동을 하는 군과 주로 측방으로 이루어지며 연마 (grinding)를 하는 군으로 나눌 수 있다. 본 연구의 목적은 저작 형태의 차이가 교합면 마모에 미치는 영향을 조사하는 것이다. 두개 하악 관절과 저작 습관에 이상이 없으며 교합면에 수복물이 없는 치과 대학생으로 하악 운동 궤적 기록기를 이용하여 상기의 전형적인 2가지 저작 형태를 보이는 각 15명씩을 피검자로 선택하였다. 각 피검자에 대한 임상 검사를 통해 ordinal scale로 교합면 마모의 등급을 조사하여, 평균 치아 마모도와 부위에 따른 치아 마모도를 비교 조사하였다. 각 피검자에 대한 인상 채득 후 모형을 제작하고 arbitrary scale로 교합면 마모의 등급을 조사하여, 평균 치아 마모도와 부위에 따른 치아 마모도를 비교 조사하고 저작측과 비저작측 마모를 비교 조사하였으며 수평 마모면과 수직 마모면을 비교 조사하였다. 1. 평균 치아 마모도는 ordinal scale로 측정하였을 때, 절단형과 연마형간에 유의할 만한 차이가 없었다.(p >0.05) 2. 부위에 따른 치아의 마모도는 ordinal scale로 측정하였을 때, 절단형과 연마형간에 유의할 만한 차이가 없었다.(p >0.05) 3. 평균 치아 마모도는 arbitrary scale로 측정하였을 때, 절단형에 비교하여 연마형에서 높은 마모도를 보였다.(p<0.05). 4. 절단형에 비교하여 연마형은 arbitrary scale로 측정하였을 때, 구치부에서는 높은 마모도를 보였으며 전치부에서는 유의할 만한 차이가 없었다(p<0.05) 5. 구치 평균 치아 마모도와 부위에 따른 치아의 마모도는 균형측에서 절단형과 연마형간에 유의할 만한 차이를 보이지 않았다(p>0.05). 6. 전치 평균 치아 마모도와 부위에 따른 치아의 마모도는 수평 마모면과 수직 마모면 비교시, 절단형과 연마형간에 유의할 만한 차이를 보이지 않았다.(p>0.05)

• Journal of Sericultural and Entomological Science
• /
• no.11
• /
• pp.81-86
• /
• 1970

This report was prepared to compare and analyze the testing method and classification of winding test in Korea to that in Japan, and the obtained results, which had been carried out, in Korea, from Sep. to Nov. in 1968 and in Japan through June in 1968, was as followings. 1. In Korean raw silk, (21 D.) the average number of breaks on winding test showed 5.91 by Korean Method but showed 8.6 by Japanese method and the latter increased to 2.7. On the other hand in Japanese raw silk, it showed 3.6 by Korean method but 4.7 by Japanese method and the latter increased to 1.1. (See Table 2,3) 2. It was seemed the tendency that the lot distribution of breaks number in Korean silk was mostly concentrated to the breaks No. 3,4 and 5(48％) by Korean method but in case of Japanese method to the breaks number 5,6 and 7(36％), and the tendency that the concentration depended mostly on the increased number of breaks. In Japanese raw silk, it was seemed the tendency that the lot distribution of breaks number was mostly concentrated to the breaks number 1. 2, and 3 (55％) by Korean Method but in case of Japanese Method to the breaks number, 2,3 and 4(50％) and the tendency that the concentration was as similar as the above. (See Table 2,3) 3. It was found the tendency that the distribution of breaks number during the open winding test was mostly concentrate red to the average number of breaks not only in Korea but in Japan. The rate 0: non-breaks, however, showed 43％ of Japan, to 7％ of Korea. (See Table 4) 4. Applying Table 1,2 to the Classification of Korea and Japan, the class distribution by Korean table showed 68％ of class 1(6), 22％ of cl ass 2(10) and 9％ of class 3(15) in Korean silk, while that by Japanese table showed 13％ of class 1(4), 56％ of class 2(10) and 29％ of class 3(18). And then the testing result to be class 1 or 2 by Korean table was. degraded from class 1 to class 2 of 55％ and from class 2 to class 3 of 20％ down. In Japanese silk, however, the class distribution by Korean table showed 85％ of class 1 (4), 10％ of class 2(10) and 5％ of class 3(18) but that by Japanese table showed 60％ of class 1(4), 33％ of class 2(10) and 7％ of class 3(18). And then there was little difference in the rate of class distribution. 5. Through the above investigation, it was seemed that Japanese classification table was only prepared for the r∼w silk of Japan, considering that the width of class 1(4) in winding table was greatly tighter than that of Korea. Because it was generally evaluated that Korean silk in quality especially in the winding test was better (next to Japan) than any other countries. 6. We could venture to estimate that, applying to Japanese method, the testing result of break number in Korean silk would show from about 6 by Korean method to 9. And then it would be found degrading hi the testing result of winding test increased gradually.

• The Korean Journal of Applied Statistics
• /
• v.34 no.5
• /
• pp.735-744
• /
• 2021

Maintaining the lifetime of a product is one of the objectives of quality control. In real processes, most samples are constructed with censored data because, in many situations, we cannot measure the lifetime of all samples due to time or cost problems. In this paper, we propose two cumulative sum (CUSUM) control charting procedures to monitor the mean of type I right-censored lognormal lifetime data. One of them is based on the likelihood ratio, and the other is based on the binomial distribution. Through simulations, we evaluate the performance of the two proposed procedures by comparing the average run length (ARL). The overall performance of the likelihood ratio CUSUM chart is better, especially this chart performs better when the censoring rate is low and the shape parameter value is small. Conversely, the binomial CUSUM chart is shown to perform better when the censoring rate is high, the shape parameter value is large, and the change in the mean is small.

• The Korean Journal of Applied Statistics
• /
• v.29 no.5
• /
• pp.823-833
• /
• 2016

The lifetime is a key characteristic of product quality. It is best to obtain the lifetime data of all samples, but they are often censored due to time or expense limitations. In this paper, we propose a binomial cumulative sum (CUSUM) chart to monitor the mean of type I right-censored Weibull lifetime data, for a xed value of the Weibull shape parameter. We compare the performance of the proposed binomial CUSUM chart with CUSUM charts studied previously using the steady-state average run length (ARL). The results show that the performance of the binomial CUSUM chart is better when the censoring rate is high and/or the sample size is small.

• Explosives and Blasting
• /
• v.19 no.3
• /
• pp.105-113
• /
• 2001

채석, 굴착, 가공과 같은 워터젯 응용분야에서 대상재료에 깊은 홈(kerf)을 절단할 수 있는 실험실용 회전식 슬로터(slotter)를 제작하여 암석을 대상으로 워터젯 시스템의 절단효율을 시험하였다. 고압펌프는 유율 7.5 l/min, 압력 379 MPa, 용량 75 kW급의 JETPAC을 주로 사용하였고, 암석시료는 화강석인 제천석, 거창석을 사용하였다. 시험과정에서는 물과 연마재 투입에 의한 절단 및 진동식 슬로터에 의한 슬롯절단 기초시험을 먼저 수행하고, 그 결과를 토대로 회전식 슬로터에 의한 절단시험을 실시하였다. 순수한 물에 의한 시험의 결과 고압수류의 토출압력은 절단심도에 정비례하였고, 노즐의 이송속도는 이차함수 형태의 반비례 관계를 보였다. 연마재 투입시험에서는 순수한 물에 의한 경우에 비해 연마재로 인한 충격력의 증가로 절단심도가 크게 증가하였는데, 유사한 조건하에서 3~5배 이상의 절단심도의 증가를 보였다. 진동식 슬로터에 의한 슬롯절삭에서는 생성된 슬롯의 내벽면이 바닥으로 갈수록 좁아짐으로써 넓은 폭의 슬롯형성은 가능하나 절삭심도가 제한되었다. 회전식 슬로터에 의한 시험에서 생성된 슬롯들은 평균 22 mm의 폭으로 내벽면이 바닥까지 서로 평행하여 깊은 심도까지 비트진입이 가능하였다. 절단율은 16~32 mm/sec의 속도범위에서 $40~160{\;}\textrm{mm}^2/sec$로 나타났다. 한편, 최대유율 24 l/min의 HUSKY S-200 펌프에 의한 시험결과 JETPAC 펌프에 비해 1.13~3.47 배의 절단심도를 보였다

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.3
• /
• pp.467-474
• /
• 2009

There are many situations arising in reliability engineering and biomedical science where failure of a subsystem increases the failure rate of other subsystem under shared load models. In this paper, the maximum likelihood estimates and the modified maximum likelihood estimates of mean time to failure and reliability function for shared load model with guarantee time are obtained by using censored system life data. Some illustrative examples are included.

• The Korean Journal of Applied Statistics
• /
• v.34 no.6
• /
• pp.957-968
• /
• 2021

Inverse censoring probability weighting (ICPW) is a popular technique in survival data analysis. In applications of the ICPW technique such as the censored regression, it is crucial to accurately estimate the censoring probability. A simulation study is undertaken in this article to see how censoring probability estimate influences model performance in censored regression using the ICPW scheme. We compare three censoring probability estimators, including Kaplan-Meier (KM) estimator, Cox proportional hazard model estimator, and local KM estimator. For the local KM estimator, we propose to reduce the predictor dimension to avoid the curse of dimensionality and consider two popular dimension reduction tools: principal component analysis and sliced inverse regression. Finally, we found that the Cox proportional hazard model estimator shows the best performance as a censoring probability estimator in both mean and median censored regressions.

• Journal of Korea Water Resources Association
• /
• v.33 no.5
• /
• pp.519-526
• /
• 2000

This study is to investigate the recurrence possibility of consecutive dry years such as the long dry period around 1900 in the annual rainfall data at Seoul station. The truncation levels, as the criterion for the dry years, are decided such as to make the occurrence of dry years follow the Poissonian distribution, which assures independent occurrence of dry years. For the truncation level of mean-0.5stdv, the occurrence of dry years is found to satisfy the Poissonian distribution weakly with 99% significance level, but for those of mean-0.75stdv and mean-stdv with 95% significance level. For these truncation levels, the long dry period around 1900 is divided into several short consecutive dry years. The Poisson process has then been applied to derive the occurrence probability of consecutive dry years. For the truncation level of mean-0.75stdv or below, the Poisson process was found to reproduce similar occurrence probabilities to the observed. Especially for the lowest truncation level used in the study (mean-stdv), we could see that the occurrence probability of consecutive dry years estimated for the data collected before the long dry period around 1900 was higher that those for the data collected after the long dry period, thus, it could be concluded that the possibility of long dry periods is decreasing recently.cently.