지난 수십 년간 유체역학적인 관점에서 곤충이나 새의 움직임을 모방하기 위해 진동하는 익형(pitching airfoil)과 동적 실속에 관한 많은 연구가 진행되어 왔다. 그러나 유동박리가 일어나지 않는 범위 내에서 진동하는 익형의 특성에 대한 연구는 보기 드물다. 또한 기존의 유동박리가 일어나지 않는 영역에서 익형의 진동 현상에 대해 수행된 연구는 수중과 같이 낮은 레이놀즈수에서 수렴되었기 때문에, 공기 중과 같이 높은 레이놀즈수에서 유동현상과 다른 특성을 보여주고 있을 수 있다. 따라서 본 연구는 높은 레이놀즈수에서의 다양한 환산 진동수, 받음각진폭, 익형에 따른 공력특성을 분석하였다. 그 결과, 익형의 진동으로 인한 양력계수의 차이는 작음을 알 수 있었다. 그러나 높은 환산 진동수에서 익형의 항력계수가 감소하는 경향이 나타나며, 이로 인해 높은 환산 진동수에서 수치적으로 추력이 발생할 수 있음을 확인하였다.
Journal of the Korean Society for Aeronautical & Space Sciences
/
v.34
no.3
/
pp.6-13
/
2006
Aerodynamic characteristics for two-dimensional cyclic motion profile of flapping airfoil in low Reynolds number flows are investigated. Plunging motion and lead-lag motion in the two dimensional space with different plunging and lead-lag amplitudes are combined to cyclic motion profile and the flow around the airfoil is simulated. Present result shows that the improved aerodynamic efficiencies for a given flapping airfoil by adding periodic lead-lag motion of airfoil rather than the pure plunging case. The thrust coefficient and lift coefficient are compared with each cycle during the flapping period and aerodynamic characteristics are obtained on upstroke motion and downstroke motion.
비정상 유동 해석을 수행하는데 있어서 비정상 Navier-Stokes 방정식을 적용한 결과와 정상 N-S 지배 방정식을 적용한 결과의 차이를 비교하려한다. 적용하고자 하는 비정상 유동은 대칭형 에어포일 NACA0012 에어포일 주위 유동으로 정하였으며, 이 때 에어포일 시위(chord) 길이와 자유류(free stream) 속도 기준으로 Re=100,000에 해당한다. 계산결과 비정상 지배 방정식을 적용한 경우 비정상 유동박리(flow separation)를 모사 할 수 있었으며, 평균 양력계수($C_L$)와 항력계수($C_D$)는 실험치와 비교적 잘 일치하였다. 하지만 정상 N-S 방정식을 적용했을 경우 비정상 유동을 모사하기 어려웠으며 평균양력, 항력계수도 실험치와 차이를 보였다. 이러한 결과는 비정상 유동 해석시 시간에 따라 변화하는 유동의 특성을 고려해 비정상 N-S 지배 방정식을 적용해야한다는 사실을 보이고 있다.
Journal of Korean Society of Coastal and Ocean Engineers
/
v.23
no.3
/
pp.258-264
/
2011
A MCS technique is represented to stochastically analyze the uncertainties of wave forces exerted on the upright sections of composite breakwaters. A stochastical models for horizontal and uplift wave forces can be straightforwardly formulated as a function of the probabilistic characteristics of maximum wave height. Under the assumption of wave forces followed by extreme distribution, the behaviors of relative wave forces to Goda's wave forces are studied by the MCS technique. Double-truncated normal distribution is applied to take the effects of uncertainties of scale and shape parameters of extreme distribution into account properly. Averages and variances of relative wave forces are quantitatively calculated with respect to the exceedance probabilities of maximum design wave height. It is found that the averages of relative wave forces may be decreased consistently with the increases of the exceedance probabilities. In particular, the averages on uplift wave force are evaluated slightly larger than those on horizontal wave force, but the variations of coefficient of the former are adversely smaller than those of the latter. It means that the uncertainties of uplift wave forces are smaller than those of horizontal wave forces in the same condition of the exceedance probabilities. Therefore, the present results could be useful to the reliability based-design method that require the statistical properties about the uncertainties of wave forces.
본 연구에서는 정사각형으로 모델링 된 실린더 주위에 균일한 유동이 흐를 때, 나타나는 이차원 층류 유동을 분석하였다. EDISON_CFD를 이용하여 각도의 변화에 따른 사각 실린더의 박리점에 의한 주위 유동 현상을 해석하였다. 격자 분해능과 시간 간격에 따른 정확성을 분석하였다. 각도의 변화에 따른 정사각 실린더의 양력계수와 항력계수를 확인하였다. 또한 한 주기의 자료값을 평균한 유동에서 박리점의 위치 변화와 주 와흘림의 길이를 분석하였다.
비유선형의 물체 주위의 유동은 정체유동, 경계층 박리 및 주기적 와열 생성 등의 복잡한 유동현상이 공존한다. 본 연구에서는 비교적 단순한 형상인 정사각주 주위의 비정상 난류 유동을 2-방정식 와점성 난류모델인 표준 $k-{\varepsilon}$ 모델과 RNG $k-{\varepsilon}$ 모델을 이용하여 예측할 수 있는지를 검증하였다. 정교하게 수행된 최근의 실험과 대와류모사(LES)의 결과를 검증을 위한 비교의 자료로 삼았다. 적절한 난류모델의 선정과 더불어 시간 정확도, 공간 정확도 및 대류항 처리법 등이 해석결과에 미치는 영향도 살펴보았다. 기존의 표준 $k-{\varepsilon}$모델은 정체점 부근에서 난류 운동에너지를 과도하게 생성하는 근본적인 문제점 때문에 실험 및 LES의 결과를 제대로 예측할 수 없었다. 난류운동에너지의 초과 예측에 따른 운동량의 과도한 혼합으로 인해, 항력계수 및 양력계수의 비정상성 뿐 아니라 평균 항력계수도 부정확하게 예측하였다. RNG $k-{\varepsilon}$ 모델을 사용한 경우에는 정체점 주위 유동현상의 예측이 상당히 향상되어 항력계수 및 양력계수의 평균치, 진폭 및 비정상성의 주기 등을 정확하게 예측하는 것이 가능하였다. 그러나 이 경우에도 예측의 정확도가 시간 증분과 격자의 크기 및 대류항 처리법등에 영향을 받으며, 특별히 대류항 처리법에 상당히 민감하게 변하는 것을 알 수 있었다. 향상된 유동예측은 RNG $k-{\varepsilon}$ 모델의 난류에너지 소산율 방정식의 개선된 항이 과도하게 생성된 난류에너지를 정체점 부근에서 제거하기 때문에 가능하다는 것을 알 수 있었다.의 20세 이하 골절 및 탈구가$30.3\%까지 감소하게되어 년도가 증가함에 따라 청장년 층에 비하여 소아골절 및 탈구가 전체적으로 감소하는 경향을 보였다. 스키골절의 부위별 발생빈도는 1990년 이전까지 하지골절 및 탈구가 많았으나 이후 점차 상지의 골절 탈구가 증가하였다 하지에서 가장 많은 골절은 경골 골절이었으며, 경골골절은 회전력에 의한 나선형골절이 $76.5\%로 가장 많았고 년도에 따른 변화는 보이지 않았다. 스키손상의 발생빈도는 초기에 비하여 점차 감소하는 경향을 보였으며, 손상의 특성도 부위별, 연령별로 다양한 변화를 나타내었다.해가능성을 가진 균이 상당수 검출되므로 원료의 수송, 김치의 제조 및 유통과정에서 병원균에 대한 오염방지에 유의하여야 할 것이다. 확인할 수 있었다. 이상의 결과에 의하면 고농도의 유기물이 함유된 음식물쓰레기는 Hybrid Anaerobic Reactor (HAR)를 이용하여 HRT 30일 정도에서 충분히 직접 혐기성처리가 가능하며, 이때 발생된 $CH_{4}$를 회수하여 이용하면 대체에너지원으로 활용 가치가 높은 것으로 판단된다./207), $99.2\%$(238/240), $98.5\%$(133/135) 및 $100\%$ (313)였다. 각각 두 개의 요골동맥과 우내흉동맥에서 부분협착이나 경쟁혈류가 관찰되었다. 결론: 동맥 도관만을 이용한 Off pump CABG를 시행하여 감염의 위험성을 증가시키지 않으면서 영구적인 신경학적 합병증을 일으키지 않았고 좋은 혈관 개존율을 보여주었다. 따라서 동맥 도관을 이용한 Off pump CABG는 관상동맥의 협착의 정도에 따라 효율적으로 시행
유체유동이나 열전달 그리고 물질전달 (물질의 혼합 및 확산) 또는 이들 현상이 복합적으로 나 타나는 각종 기계의 설계와 성능 해석을 하기 위해서는 그 현상을 지배하는 편미분 방정식들의 해를 수치적으로 구해야 한다. 유동 상태가 충류 유동인 경우는 지배 방정식의 수가 알고자 하는 미지변수 즉 속도, 압력, 온도, 농도 등의 개수와 같고 또한 이들 변수들의 변동이 그리 심하지 않기 때문에 적절한 수치 해법을 사용하면 그 해를 구할 수 있다. 그러나 난류유동의 경우에는 변수들이 시간상으로 또한 공간적으로 대단히 심하게 변동(fluctuation)하기 때문에 공 학적으로 우리가 원하는 정보들, 즉, 표면 마찰저항이나 양력, 얼전달 계수, 물질 확산계수 등을 현재 수준의 전자계산기로 계산하는 데는 계산시간이 엄청나게 소요될 뿐만 아니라 변수 저장 메모리도 과도하게 차지하기 때문에 실제적인 계산 방법이 되지 못하고 있다. 이러한 이유로 변수들의 순간 변화 상태를 나타내는 지배 방정식들을 해석하는 대신에 이들 지배 방정식의 시 간평균을 취하여 유도한 난류 방정식들을 사용하게 된다. 그러나 이 시간 평균 과정에서 파생 되는 또 다른 미지의 난류 변수들 때문에 난류 지배 방정식에 있어서는 그 지배 방정식의 개수 보다 미지 변수의 개수가 많아져서 난류 지배 방정식을 풀기 위해서는 시간평균 과정에서 나타난 난류 변수들을 원래 있던 미지 변수들의 함수나 방정식의 형태로 가정할 필요가 있게 되는데 이 가정되는 함수 관계들을 난류 계산 모형이라고 한다. 난류 계산 모형은 물리적인 통찰과 직관에 의해서 실용적인 형태로 가정되기도 하지만 최근에는 논리적으로 엄격한 모형 원칙에 따른 수 학적인 방법으로 유도되고 있는데 이 글에서는 일반 독자들이 쉽게 이해할 수 있도록 마하수가 낮은 2차원 비압축성 난류 유동을 예로 들어 x-y 직교 좌표계에서 표현되는 난류 계산 모형들을 소개하고 앞으로듸 발전 방향을 개관하며 현재의 응용 사례들을 예로 들어 모형의 성능을 비교 하여 보기로 한다.
Journal of Advanced Marine Engineering and Technology
/
v.36
no.1
/
pp.94-100
/
2012
The passive control by vertical splitter plate of fluid force acting on a square prism near a plane wall was studied by measuring of fluid force on the prism and by visualization of the flow field using PIV. The hight of the splitter plate was 10% of the square width. The experimental parameters were the attaching position of vertical splitter plate and the space ratios G/B to the prism height. Time variation of vorticity was most remarkable at 3.0B(B: prism height) position toward wake direction from the center of the prism. The point of inflection of average lift coefficient and Strouhal number on the prism were represented at the space ratio G/B=0.4~0.6 for the prism having vertical splitter plate. The drag of the prism was reduced average 5.0% with the space ratios by attaching the vertical splitter plate at the upper and rear corner on the prism. In this case, the size of the separated region on the upside of the prism was smaller than that of prism having no the splitter plate.
Journal of the Society of Naval Architects of Korea
/
v.28
no.2
/
pp.52-68
/
1991
A new propeller series is developed using the newly developed blade section(KH18 section) which behaves better cavitation characteristics and higher lift-drag ratio at wide range of angle-of-attack. The pitch and camber distributions are disigned in order to have the same radial and chordwise loading distribution with the selected circumferentially averaged wake input. Since the geometries of the series propeller, such as chord length, thickness, skew and rate distribations, are selected by regression of the recent full scale propeller geometric data, the performance prediction of a propeller at preliminary design stage can be mure realistic. Number of blades of the series propellers is 4 and the expanded blade area ratios are 0.3, 0.45, 0.6 and 0.75. Mean pitch ratios are selected as 0.5, 0.65, 0.8, 0.75 and 1.1 for each expanded area ratio. The new propeller series is composed of 20 propellers and is named as KD(KRISO-DAEWOO) propeller series. Propeller open water tests are performed at the experimental towing tank, and the cavitation observation tests and fluctuating pressure measurements are carried out at the cavitation tunnel of KRISO. $B_{P}-\delta$ curves, which can be used to select the optimum propeller diameter at the preliminary design stage, are derived from a regression analysis of the propeller often water test results. The KD-cavitation chart is derived from the cavitation observation test results by choosing the local maximum lift coefficient and the local cavitation number as parameters. The caviy extent of a propeller can be predicted more accurately by using the KD-cavitation chart at a preliminary design stage, since it is derived from the results of the cavitation observation tests in the selected ship's wake, whereas the existing cavitation charts, such as the Burrill's cavitation chart, are derived from the test results in uniform flow.
KSCE Journal of Civil and Environmental Engineering Research
/
v.30
no.1A
/
pp.27-33
/
2010
This study addresses a methodology to use small wind turbines for dual purposes, improving aerodynamic performance of flexible bridges and wind energy harvesting. A way to proper placement of small wind turbines on flexible bridges were proposed according on the analogy of conventional aerodynamic appendages. From the wind tunnel tests, it was found that the wind turbine attached like fairing was effective to reduce the vortex-induced vibration of bridge and the optimal spanwise interval of the wind turbine was 3-4.5 time of turbine diameter. Moreover the aerodynamic coefficients of the bridge were improved after installation of the wind turbines. Present results showed the general availability of wind turbine for improvement of aerodynamic performance and energy supply of flexible bridges although the capacity of wind power generation was strongly dependent on wind characteristics of the bridge site.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.