• Journal of Bio-Environment Control
• /
• v.25 no.3
• /
• pp.218-223
• /
• 2016

The calculation method of ground heat exchange in greenhouses has different ideas in each design standard, so there is a big difference in each method according to the size of greenhouses, it is necessary to establish a more accurate method that can be applied to the domestic. In order to provide basic data for the formulation of the calculation method of greenhouse heating load, we measured the soil temperature distribution and the soil heat flux in three plastic greenhouses of different size and location during the heating period. And then the calculation methods of ground heat exchange in greenhouses were reviewed. The soil temperature distributions measured in the heating greenhouse were compared with the indoor air temperature, the results showed that soil temperatures were higher than room temperature in the central part of greenhouse, and soil temperatures were lower than room temperature in the side edge of greenhouse. Therefore, it is determined that the ground heat gain in the central part of greenhouse and the perimeter heat loss in the side edge of greenhouse are occurred, there is a difference depending on the size of greenhouse. Introducing the concept of heat loss through the perimeter of building and modified to reflect the size of greenhouse, the calculation method of ground heat exchange in greenhouses is considered appropriate. It was confirmed that the floor heat loss measured by using soil heat flux sensors increased linearly in proportion to the temperature difference between indoor and outdoor. We derived the reference temperature difference which change the direction of ground heat flow and the perimeter heat loss factor from the measured heat flux results. In the heating design of domestic greenhouses, reference temperature differences are proposed to apply $12.5{\sim}15^{\circ}C$ in small greenhouses and around $10^{\circ}C$ in large greenhouses. Perimeter heat loss factors are proposed to apply $2.5{\sim}5.0W{\cdot}m^{-1}{\cdot}K^{-1}$ in small greenhouses and $7.5{\sim}10W{\cdot}m^{-1}{\cdot}K^{-1}$ in large greenhouses as design standard data.

• Korean Journal of Social Welfare
• /
• v.50
• /
• pp.33-59
• /
• 2002

This study aims to provide policy suggestions by examining the perception and attitude of Koreans toward the welfare rights. The study was done through a telephone survey conducted by an opinion research institute on 2,050 respondents in 16 cities and provinces. The results are as follows. First, a majority of Koreans responded that the primary responsibility for welfare rests with the government and perceived their welfare receipt rights in a positive way. Respondents also showed an assertive attitude toward exercising their rights by stating that they intend to file a demurrer or participate in civic activities. Second, in terms of duty performance, most respondents showed different positions concerning tax hike and insurance rate increase, although they showed a stronger opposition to an increase in insurance fee. In addition, 90% of the respondents were in favor of building welfare institutions in the residential area and an overwhelming proportion of the respondents indicated that they would take an active part in welfare development by regularly paying taxes and volunteering. Third, the respondents gave a very negative rating to Koreas welfare system and its overall level. That is, people thought that the level of Koreas welfare system is on a par with that in developing or underdeveloped countries, and that the welfare system benefits no one or only the rich. People generally felt that there was not one proper welfare institution. In conclusion, the study found that Koreans have keen awareness of their welfare rights and proactive attitude toward welfare development, whereas negative viewpoint toward tax and insurance fee increases. This may stem from peoples distrust of government welfare policies and the existing welfare system. This study suggests that welfare policy is an important factor in determining peoples political attitude. Therefore, government authorities must recognize people not as passive receivers of welfare benefit but as active policy partners, and establish policies that reflect peoples high welfare rights perception and willingness to take part in welfare development.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.85-95
• /
• 2018

In this research, a biofilter system equipped with a biofilter process and a humidifier composed of a fluidized aerobic and an anoxic reactor, was constructed to treat odorous waste air containing hydrogen sulfide, ammonia and VOC, frequently generated from pig and poultry housing facilities, compost manufacturing factories and publicly owned facilities. Its optimum operating condition was revealed and discussed. In the experiment of complex feed, the ammonia of fed-waste air was removed by ca. 75% and more than 20% at the stage of the humidifier and the biofilter, respectively. The toluene of the fed-waste air was removed by ca. 20% and more than 70% at the stage of the humidifier and the biofilter, respectively. Therefore the water-soluble ammonia and the water-insoluble toluene were treated mainly at the stage of the humidifier and the biofilter, respectively. In addition, hydrogen sulfide was almost absorbed at the stage of the humidifier so that it was not detected at the biofilter process. In the experiment of ammonia-containing feed, the ammonia of fed-waste air was removed by ca. 65% and 35% at the stage of the humidifier and the biofilter, respectively. Its removal efficiency of ammonia at the stage of the humidifier was 10% less than that in the experiment of complex feed, due to no supply of such carbon source as toluene required in the process of denitrification. In the experiments of complex feed, ammonia-containing feed with and without (instead, glucose) the addition of yeast extract, the absorption rates of ammonia-nitrogen were ca. 0.28 mg/min, 0.23 mg/min and 0.27 mg/min, respectively. The corresponding denitrification rates in the anoxic reactor were 0.42 mg/min, 0.55 mg/min and 0.27 mg/min, respectively. In addition, in the modeling of bubble column(the fluidized aerobic reactor of the humidifier) process, the value of specific surface area(a) of bubbles multiplied by enhanced mass transfer coefficient (E $K_y$) was evaluated to be 0.12/hr.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.10
• /
• pp.1535-1544
• /
• 2010

This study was conducted to evaluate the sanitation management practices in food manufacturing companies that supply food and food ingredients to school foodservice operations. Subjects consisted of 34 food manufacturing factories located in the Daegu and Gyeongbuk areas. Sanitation performance was self-evaluated using a Likert 5-point scale. The total mean score for factory sanitation performance was 4.72. Scores for perceived sanitation management performance in the factories were as follows: management of material (4.90); personal hygiene (4.78); management of work (4.71); management of workplace and vicinity (4.68); and food and raw material transportation (4.67). Participating companies that had HACCP certification programs scored high on the following sanitation inspection items: washing and sanitation guides, adequate equipment for correct hand washing, and sanitation of raw material delivery vans. The mean frequency for employee sanitation education was 2.8 times per month. Factory managers believed that their sanitation management programs kept their food safe and that the food was produced and delivered with a high degree of safety. However, they thought that food sanitation standardization was needed in order to supply high-quality and safe food items. In terms of traceability, 58.8% of the raw materials were traceable and 61.8% of the manufactured products were traceable. Sanitation management performance scores for the participating food manufacturing companies were high, although the soybean sprouts processing companies had comparatively low scores. Management reinforcement of employee sanitation education and a sense of duty and pride among factory employees will promote adequate and appropriate sanitation management performance for food safety and quality in factories that supply food and ingredients to school foodservice operations.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.6
• /
• pp.76-89
• /
• 2017

Tourism is being used as a tool to regenerate declining spaces. Therefore, the government is carrying out various projects to create tourist attractions to revitalize the traditional marketplace, which is declining nationwide. Because of these government-led projects, traditional marketplaces have been transformed into tourist attractions, and some markets have received enough positive feedback that they have been successfully revitalized economically. However, as marketplaces have become tourist destinations, negative views about government support projects are also increasing. This also leads to conflicts due to differences in perception and interests of stakeholders. This paper examines the process of the marketplace becoming a tourist destination focused on the Tongin Market, in Seoul which has been regenerated as a tourist attraction through a government support project. The purpose of this study is, first, to examine the background of tourist markets becoming tourist attractions and the issues surrounding them. The second was to explore in depth the types of conflict perceptions of visitors, residents and tourists, and the perception of their responses. As a research method, the process of the revitalization of traditional markets through news and existing literature, issues and the difference of perceptions about tourist-centric traditional marketplaces were examined. In addition, the Q methodology was used, which is a qualitative research methodology that can measure the difference of viewpoints and perceptions of specific events in order to analyze the difference of perception among visitors in traditional marketplaces. The results of the study show that there are three main perspectives of difference among visitors' perceptions about government support projects in traditional marketplaces and the marketplace becoming a tourist attraction. The 'policy dependent perspective' emphasizes the necessity of government regulations, a 'critical perspective' criticizes the government's traditional marketplace support policy, and the 'neutral perspective' acknowledges the need for government-led projects and accentuating the internal competitiveness of the marketplace. The study provided the environment for academic discussion about traditional marketplaces, which are becoming tourist attractions nationwide. In addition, this paper can contribute to providing implications for future government projects by analyzing the perception of marketplace visitors.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.6
• /
• pp.421-428
• /
• 2014

For the analysis of water supply network, demand-driven and pressure-driven analysis methods have been proposed. Of the two methods, demand-driven analysis (DDA) can only be used in a normal operation condition to evaluate hydraulic status of a pipe network. Under abnormal conditions, i.e., unexpected pipe destruction, or abnormal low pressure conditions, pressure-driven analysis (PDA) method should be used to estimate the suppliable flowrate at each node in a network. In order to carry out the pressure-driven analysis, head-outflow relationship (HOR), which estimates flowrate at a certain pressure at each node, should be first determined. Most previous studies empirically suggested that each node possesses its own characteristic head-outflow relationship, which, therefore, requires verification by using actual field data for proper application in PDA modeling. In this study, a model pipe network was constructed, and various operation scenarios of normal and abnormal conditions, which cannot be realized in real pipe networks, were established. Using the model network, data on pressure and flowrate at each node were obtained at each operation condition. Using the data obtained, previously proposed HOR equations were evaluated. In addition, head-outflow relationship at each node was analyzed especially under multiple pipe destruction events. By analyzing the experimental data obtained from the model network, it was found that flowrate reduction corresponding to a certain pressure drop (by pipe destruction at one or multiple points on the network) followed intrinsic head-outflow relationship of each node. By comparing the experimentally obtained head-outflow relationship with various HOR equations proposed by previous studies, the one proposed by Wagner et al. showed the best agreement with the exponential parameter, m of 3.0.

• Journal of Bio-Environment Control
• /
• v.14 no.2
• /
• pp.83-88
• /
• 2005

A study was conducted on three pollination methods on oriental melon(sageageol-ggul) grafting with pumpkin(seongjutozoa) for the labor-saving and to improve fruit set. Fruit weight, flesh thickness and fruit setting rate of oriental melon were greater in growth regulators treatment than those of pollinated by bees. Sugar content and hardness of fruits pollinated by bees were higher than those of by growth regulators. From the last ten days of the February to the first ten days of the March, fruit setting rate was $95\%$ in fruit setting growth regulators, whereas it was $46\%$ and $45\%$ in pollinated by honey and bumble bee, respectively. After the middle of March, the percentage of fruit setting was >$98\%$ in all the pollination methods. The cultivation under plastic houses of oriental melon, suitable fruiting time far the pollination by bees was decided after middle days of the March. Chromaticity and especially the value of 'a' of fruit of oriental melon pollinated by bees were higher than those of growth regulators. The percentage of fermented fruits of bee pollinated and growth regulators treated was $6.7\~9.1\%\;and\;28.1\%$, respectively. The weight of 100 seeds of bees pollinated were higher than that of growth regulators. The more increased the weight of 100 seeds the less appeared the rate of fermented fruits. The percentage of marketable fruits of the honey and bumble bee pollinated and that of growth regulators treated was $82\%,\;80.3\%\;and\;62.5\%$, respectively. The decreasing rate of fruit weight during storage of bees pollinated was less than those of growth regulators. In these results, the introduction of honey bee and bumble bee for the pollination of oriental melon was able to labor-saving of fruit set and increase of fruit quality.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.2
• /
• pp.183-193
• /
• 2018

Currently, the Korea Atomic Energy Research Institute (KAERI) is planning to build the Ki-Jang Research Reactor (KJRR) in Ki-Jang, Busan. It is important to safely dispose of low-level radioactive waste from the operation of the reactor. The most efficient way to treat radioactive waste is cement solidification. For a radioactive waste disposal facility, cement solidification is performed based on specific waste acceptance criteria such as compressive strength, free-standing water, immersion and leaching tests. Above all, the leaching test is important to final disposal. The leakage of radioactive waste such as $^{137}Cs$ causes not only regional problems but also serious global ones. The cement solidification method is simple, and cheaper than other solidification methods, but has a lower leaching resistance. Thus, this study was focused on the development of cement solidification for an enhancement of cesium leaching resistance. We used Zeolite and Loess to improve the cesium leaching resistance of KJRR cement solidification containing simulated KJRR liquid waste. Based on an SEM-EDS spectrum analysis, we confirmed that Zeolite and Loess successfully isolated KJRR cement solidification. A leaching test was carried out according to the ANS 16.1 test method. The ANS 16.1 test is performed to analyze cesium ion concentration in leachate of KJRR cement for 90 days. Thus, a leaching test was carried out using simulated KJRR liquid waste containing $3000mg{\cdot}L^{-1}$ of cesium for 90 days. KJRR cement solidification with Zeolite and Loess led to cesium leaching resistance values that were 27.90% and 21.08% higher than the control values. In addition, in several tests such as free-standing water, compressive strength, immersion, and leaching tests, all KJRR cement solidification met the waste acceptance or satisfied the waste acceptance criteria for final disposal.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.1
• /
• pp.46-55
• /
• 2011

The importance of forests and plants are appreciated by all of us, but it is often overlooked because we are surrounded by it. The arboretum is one of facilities which provide users with education on the environment, knowledge about plants, and recreation, playing a role as a nature school by exhibiting and collecting plants of various ecosystems. Anyone can enjoy fresh air, a pleasant environment, and knowledge about a wide variety of plants on the condition that they aactually visit it and pay the entrance fee. However, it has not been measured whether the expense which users pay to enjoy an arboretum is a true value of arboretums. The environment that arboretums offer is extra-market goods, or public goods. A variety of ideas and methods to measure the value of public goods have been researched among economists, statisticians, and mathematicians. The Contingent Valuation Method(CVM) is most widely used a s an assessment method on environment goods and adopted as an estimation method for compensation for restoration of the environment by the American Supreme Court. The purpose of this study is to suggest a current monetary value correspondingent to the value of arboretums by applying the CVM. The survey suggested that when an arboretum provides a high educational value and when the respondents have a higher income, it is more likely that they would be willing to pay for entrance into the arboretum. The quantified value in monetary terms for the environmental value of Gyeongnam Arboretum is WTP mean \15,648; WTP median \13,648; and WTP truncated \15,449 per visitor. In annual terms, the amounts are calculated at WTP mean \8,408,265,024; WTP median \7,333,589,024; and WTP truncated \8,301,334,762. These quantified amounts can be thought to represent the value of conservation of arboretums and awaken users to the precious value of nature. Also, they are helpful to let the general public have proper knowledge about and recognize the value of arboretums and forests.

• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.69-78
• /
• 2009

Korea has achieved significant economic growth with building the Gyeongbu Expressway. As the number of new road construction projects has decreased, it becomes more important to maintain optimal status of the current road networks. One of the best ways to accomplish it is weight enforcement as active control measure of traffic load. This study is to develop High-speed Weigh-in-motion System in order to enhance efficiency of weight enforcement, and to analyze patterns of overloaded trucks on highways through the system. Furthermore, it is to review possibilities of developing overweight control system with application of the HS-WIM system. The HS-WIM system developed by this study consists of two sets of an axle load sensor, a loop sensor and a wandering sensor on each lane. A wandering sensor detects whether a travelling vehicle is off the lane or not with the function of checking the location of tire imprint. The sensor of the WIM system has better function of classifying types of vehicles than other existing systems by detecting wheel distance and tire type such as single or dual tire. As a result, its measurement errors regarding 12 types of vehicle classification are very low, which is an advantage of the sensor. The verification tests of the system under all conditions showed that the mean measurement errors of axle weight and gross axle weight were within 15 percent and 7 percent respectively. According to the WIM rate standard of the COST-323, the WIM system of this study is ranked at B(10). It means the system is appropriate for the purpose of design, maintenance and valuation of road infrastructure. The WIM system in testing a 5-axle cargo truck, the most frequently overloaded vehicle among 12 types of vehicles, is ranked at A(5) which means the system is available to control overloaded vehicles. In this case, the measurement errors of axle load and gross axle load were within 8 percent and 5 percent respectively. Weight analysis of all types of vehicles on highways showed that the most frequently overloaded vehicles were type 5, 6, 7 and 12 among 12 vehicle types. As a result, it is necessary to use more effective overweight enforcement system for vehicles which are seriously overloaded due to their lift axles. Traffic volume data depending upon vehicle types is basic information for road design and construction, maintenance, analysis of traffic flow, road policies as well as research.