• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.810-817
• /
• 2015

This study was conducted to evaluate the pressure treatment characteristics of yellow poplar skin timber with ACQ-2, CUAZ-3, and CuHDO-1. The effect of moisture content (MC) on treatability was investigated, and fixation characteristics of copper-based preservatives were also evaluated. Sapwood of yellow poplar, which was dried below 50 percent MC, was fully penetrated with preservatives, and minimum requirement of preservative retention for the hazard class H3 was achieved. Through measuring retention gradient in yellow poplar sapwood, it was confirmed that minimum requirement of preservative retention for the hazard class H3 was achieved in the assay zone from the surface to 15 mm-depth when the specimens were dried below 30 percent MC. Yellow poplar heartwood did not meet the minimum requirement of penetration and retention for the hazard class H3 over the range of pretreatment MCs tested. The fixation rate of copper was much faster under drying condition compared with nondrying condition; more than 90% of copper were fixed in 3 weeks at $21^{\circ}C$ under drying conditions.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.2
• /
• pp.101-111
• /
• 2006

In the present work, life cycle assessments (LCA) of various waste-plastic recycling methods (material recycling, refused derived fuel (RDF), recycling on furnace, and pyrolytic oil production) were carried out to investigate their impacts on the environment. Six types of impacts were considered. While the impact on global warming was found to be significant, the impact on others were negligible. The impact values on the global warming caused by the material recycling, RDF, and the recycling on furnace were negative, which implied that their impacts could be noticeably reduced when waste-plastic are used as an alternative to newly drawn plastics. The pyrolytic oil production, however, showed positive value, which may be due to the carbon dioxide produced during electric power generation. The pyrolytic oil production had the largest impact on the ozone layer destruction, which was due to ozone depleting substances produced from the process itself. These results can be used as a useful data for the enhancement of waste-plastic recycling.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.24 no.3
• /
• pp.29-51
• /
• 2013

The purpose of this study is to develop internal tables in Christian religion in the 5th edition of Korean Decimal Classification. The scope of the Christianity, its structure of various classification schemes, and the concepts of internal tables were analyzed. The contents of several textbooks were analyzed for the scope of the discipline and the classification schemes and internal tables of DDC, UDC, NDC, LCC, Classification of the Library of Union Theological Seminary and the Classification of the Korea Theological Library were compared. And then, internal tables in Bible, sermon, worship, church history were built and those tables were evaluated by librarians and experts in the fields. And finally, internal tables of the Christiainity and new headings were suggested. New internal tables in Christianity will increase the effectiveness of information retrieval and it will provide a foundation for developing internal tables in other disciplines.

• Journal of Biomedical Engineering Research
• /
• v.23 no.5
• /
• pp.397-403
• /
• 2002

Urine glucose monitoring system is a self-monitoring system that display the glucose level by non-invasive measurement method. In this paper, We developed a noninvasive urine glucose monitoring system that improved defects of urine glucose measurement with a colorimeter method and invasive blood glucose measurement method. This system consist of bio-chemical sensor for urine glucose measurements, signal detecting part, digital and signal analysis part, display part and power supplying part. The developed bio-chemical sensor for the measurement of urine glucose has good reproducibility, convenience of handing and can be mass-produced with cheap price. To evaluate the performance of the developed system, We performed the evaluation of confidence about the detection of glucose level by a comparison between a standard instrument in measuring glucose level and the developed system using standard glucose solutions mixed with urine. Standard error was 2.85282 from the evaluation of confidence based on regression analysis. Also, In analysis of S.D(standard deviation) and C.V(coefficient of validation) that are important parameters to evaluate system using bio-chemical sensor, S.D was 10% which falls under clinically valid value, 15%, and C.V was under 5%. Consequently from the above results, compared to blood glucose measurement, the system performance is satisfactory.

• Journal of Korean Society of Archives and Records Management
• /
• v.22 no.1
• /
• pp.133-157
• /
• 2022

Special subject archives in different fields have been established and the related studies have been constantly made so far, but no evaluation index reflecting the characteristics of the archives has yet been developed. Thus, this study intends to develop a draft of the special subject archive operation evaluation index through literature research and propose the special subject archive operation evaluation index through a Delphi survey. A Delphi survey was conducted thrice, with 10 persons in charge of archiving thematic archives in 5 fields. Finally, a special subject archive operation evaluation index consisting of 4 evaluation categories, 10 evaluation items, and 28 detailed items was proposed. This study is significant because it was the first in Korea to develop and propose an operation evaluation index for special subject archives.

• Clean Technology
• /
• v.23 no.4
• /
• pp.388-392
• /
• 2017

In this study, a quantitative environmental impact assessment for the production process of breathable film was conducted employing Life Cycle Assessment (LCA) methodology. Among the various categories, Global Warming (GW) accounted for the highest impact (97%) followed by Human Toxicity (HT). And the key substances of various impact categories included HDPE, PP, and electricity. In the production process, the high impact resulted from mixing process (57%), lamination process (29%), and extruder process (10%). To improve environmental impact, it is necessary to design a new process system that reduces the amount of electricity used and that increases production yields, if raw materials such as HDPE and PP owe excluded.

• Journal of the Korean Society for Library and Information Science
• /
• v.57 no.1
• /
• pp.309-338
• /
• 2023

As awareness of social and environmental issues increases due to the gust of ESG management, interest in ESG management is increasing, and the influence of ESG evaluation is getting stronger, and libraries need to participate in ESG management evaluation. In order to apply ESG management to libraries, library ESG evaluation indicators must be developed. Therefore, this study attempted to comprehensively examine ESG management evaluation indicators of public institutions, including companies, and propose ESG management evaluation indicators applicable to libraries. To this end, it went through the process of investigating and analyzing ESG-related prior research, deriving preliminary evaluation indicators for libraries, collecting expert FGI opinions, developing primary library ESG evaluation indicators based on expert FGI opinions, and) examining the suitability of primary library ESG evaluation indicators. Finally, a total of 25 items were selected in the environmental area, a total of 56 items in the social area, and a total of 32 items in the governance area. In future studies, it is necessary to conduct ESG management evaluation for libraries based on this indicator.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.8
• /
• pp.25-37
• /
• 2014

In load and resistance factor design (LRFD) method, resistance factors are typically calibrated using resistance bias factors obtained from either only the data within ${\pm}2{\sigma}$ or the data except the tail values of an assumed probability distribution to increase the reliability of the database. However, the data selection approach has a shortcoming that any low-quality data inadvertently included in the database may not be removed. In this study, a data quality evaluation method, developed based on the quality of static load test results, the engineering characteristics of in-situ soil, and the dimension of aggregate piers, is proposed for use in constructing database. For the evaluation of the method, a total 65 static load test results collected from various literatures, including static load test reports, were analyzed. Depending on the quality of the database, the comparison between bias factors, coefficients of variation, and resistance factors showed that uncertainty in estimating bias factors can be reduced by using the proposed data quality evaluation method when constructing database.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.3
• /
• pp.223-231
• /
• 2009

This study intends to develop a GIS-based environmental assesment technique for environmental friendly road route plan using a spatial analysis function. After embodying an impact range based on the analysis of factors which cause the environmental damage by the road construction, a literature survey on a diverse grading cases and legal regulations was conducted. As a quantitative model for the spatial analysis, AHP was selected. As the environmental assessment, 8 items such as topography & geology, animals & plants, soil ecology, water quality, air quality, noise, land use, and landscape were selected. and then finally classified into three-grades using a pairwise comparison of the alate collected by a questionnaire surveying, weighting values were applied to there 8 items. The highest weight value, the grade 1 among eight was 0.191 for animals & plants. As the result of verifying the above method for the case region, the most environment-friendly road route could be generated.

• Journal of Industrial Convergence
• /
• v.21 no.1
• /
• pp.103-110
• /
• 2023

In this study, clustering analysis was performed to find out the influence of the maturity level of Industry 4.0 of SMEs in Korea, index factors of clustering, and major factors on the self-evaluation of companies. When 80 domestic SMEs were classified into 4 categories, it was found that there was a significant positive correlation between process, technology and organization. In addition, the majority of the 80 companies tested according to the maturity model appear to be immature or partially mature, and many improvements and re-evaluation of innovation strategies related to Industry 4.0 are needed. Finally, it was concluded that the Singapore Smart Industry Readiness Index is suitable for conducting self-assessment in domestic SMEs. These conclusions can serve as useful maturity and grouping guidelines for practitioners and researchers.