• The Korean Journal of Pesticide Science
• /
• v.12 no.2
• /
• pp.141-147
• /
• 2008

Globally Harmonized System (GHS) for classification and labelling will provide an internationally agreed hazard classification system of chemical products and for communication of those hazards. This study aimed for establishment of the oral acute toxic class (ATC) method and application of GHS on pesticides. The ATC method was developed for determining $LD_{50}$ estimates of chemical substances with significantly fewer animals than needed when applying conventional $LD_{50}$ tests. We carried out $LD_{50}$ test and ATC test on 13 pesticides, Although methidathion EC and parathion-ethyl EC showed significantly different in $LD_{50}$ values between $LD_{50}$ test and ATC method, there are no difference in toxicity class by GHS. Both tests on the other pesticides showed almost equal results and toxicity class by GHS. Therefore, this study indicated high possibility of application of ATC method and GHS on pesticides.

• Journal of Environmental Policy
• /
• v.8 no.4
• /
• pp.125-147
• /
• 2009

The Basic Environmental Policy Act (BEPA) (Law No. 4257 effective 1. August 1990) sets forth the basic policies and administrative framework for environmental preservation, leaving more detailed regulations, and emission controls to separate laws targeting air, water, and solid waste, etc. The BEPA Article 31 adopts an unprecedented strict liability standard for damages as an absolute liability. The BEPA Article 31 provides for liability as follows. If a company is alleged to have caused damage through pollution of the environment, it will be liable for damages unless it can show that the pollution did not cause damages, or that it did not actually cause pollution. If the company did cause pollution, and if the pollution is the cause for the damages in question, the company will be liable irrespective of whether it was negligent or otherwise at fault. If there are two or more companies involved in the pollution, but it is unclear which company caused the damages, all of the companies will be jointly and severally liable for the damages. In this paper, the author attempts to uncover the problems of BEPA Article 31 and then seeks desirable amendments by comparing it to the German Environmental Liability Act. First, it will be necessary to provide definitions of 'companies etc.'. Second, it will be necessary to enumerate the kinds of company facilities. Third, it will be necessary to provide exclusionary clauses on material damages. Fourth, it will be necessary to show 'presumption of cause and effect'. Fifth, it will be necessary to provide a clause on 'right to information'. Sixth, it will be necessary to provide a clause for force majeure. Seventh, it will be necessary to take measures to secure abundant liability for damages which can be caused by the owner of the facility, the potential polluter. Finally, it is appropriate that Korea now legislate an Environmental Liability Act akin to the German Environmental Liability Act.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.4
• /
• pp.214-219
• /
• 2019

Purpose: The aim of this study was to evaluate the correlation between inter-condylar width and inter-maxillary first molar width to present the criteria for prosthetic reconstruction of dental arch width in maxillary and mandibular fully edentulous patients. Materials and Methods: 120 Koreans (60 males and 60 females) who underwent the cone beam computerized tomography (Cone-beam CT) were selected. The Cone-beam CT images were analysed using Invivo 5.1. After reorientation of axis, inter-maxillary first molar width was measured by clicking both mesio-buccal cusp tip of maxillary first molar. And inter-condylar width was measured by clicking both middle points of condyles. The collected data were analysed with SPSS Version 20.0 and statistical significance of the correlation between inter-condylar width and inter-maxillary first molar width was verified by Pearson's correlation analysis. Results: The mean inter-condylar width of Korean was 105.9 mm, and that of male (108.3 mm) was statistically significantly wider than the female (103.4 mm). The inter-maxillary first molar width of Korean was 57.1 mm, and that of male (57.9 mm) was statistically significantly wider than the female (56.2 mm). Pearson's correlation analysis between inter-condylar width and inter-maxillary first molar width showed a Pearson correlation coefficient of 0.614 and statistically significantly positive correlation. Conclusion: Intercondylar width and inter-maxillary first molar width showed positive correlation and the average ratio of inter-condylar with and inter-maxillary first molar width was 1:0.54. Based on the results of this limited study, inter-condylar width can be used as a guide for setting up dental arch width in fully edentulous patient.

• Restorative Dentistry and Endodontics
• /
• v.34 no.3
• /
• pp.177-183
• /
• 2009

The aim of this study was to evaluate the marginal and internal gaps in CEREC3 CAD/CAM inlays of three different preparation designs. CEREC3 Inlays of three different preparation designs (n=10) were fabricated according to Group I-conventional functional cusp capping/shoulder preparation, Group II-horizontal reduction of cusps and Group III-complete reduction of cusps/shoulder preparation. After cementation of inlays. the bucco-lingual cross section was performed through the center of tooth. Cross section images of 20 magnifications were obtained through the stereomicroscope. The gaps were measured using the Leica application suite software at each reference point. Statistical analysis was performed using one-way ANOVA and Tukey's test (${\alpha}<0.05$). The marginal gaps ranged from 80.0 to $97.8{\mu}m$ for Group I, 42.0 to $194.8{\mu}m$ for Group II, 51.0 to $80.2{\mu}m$ for Group III. The internal gaps ranged from 90.5 to $304.1{\mu}m$ for Group I, 80.0 to $274.8{\mu}m$ for Group II, 79.7 to $296.7{\mu}m$ for Group III. The gaps of each group were the smallest on the margin and the largest on the horizontal wall. For the CEREC3 CAD/CAM inlays, the simplified designs (groups II and III) did not demonstrate superior results compared to the traditional cusp capping design (group I).

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.503-514
• /
• 2011

In this research, the seismic connection details for two concrete-filled U-shape steel beam-to-H columns were proposed and cyclically tested under a full-scale cruciform configuration. The key connecting components included the U-shape steel section (450 and 550 mm deep for specimens A and B, respectively), a concrete floor slab with a ribbed deck (165 mm deep for both specimens), welded couplers and rebars for negative moment transfer, and shear studs for full composite action and strengthening plates. Considering the unique constructional nature of the proposed connection, the critical limit states, such as the weld fracture, anchorage failure of the welded coupler, local buckling, concrete crushing, and rebar buckling, were carefully addressed in the specimen design. The test results showed that the connection details and design methods proposed in this study can well control the critical limit states mentioned above. Especially, the proposed connection according to the strengthening strategy successfully pushed the plastic hinge to the tip of the strengthened zone, as intended in the design, and was very effective in protecting the more vulnerable beam-to-column welded joint. The maximum story drift capacities of 6.0 and 6.8% radians were achieved in specimens A and B, respectively, thus far exceeding the minimumlimit of 4% radians required of special moment frames. Low-cycle fatigue fracture across the beam bottom flange at a 6% drift level was the final failure mode of specimen A. Specimen B failed through the fracture of the top splice plate of the bolted splice at a very high drift ratio of 8.0% radian.

• Korean Journal of Poultry Science
• /
• v.42 no.3
• /
• pp.223-230
• /
• 2015

Eggs are an important source of protein for the human diet. Consumers want fresher, more delicious and more sanitary eggs. In Korea, the Shell Egg Grading system (EGS) was employed in 2001. The portion of graded shell eggs has increased every year, but graded shell eggs account for only 6% of all eggs. The EGS should satisfy producers, distributors and consumers. However, the EGS does not have an official function because of many problems. Consumers cannot select various graded shell eggs in the market, and producers do not receive enough profit even though they produce top-quality graded shell eggs. There are few studies on the EGS, Therefore, this study was performed to improve the EGS. We surveyed the EGS, GP Centers and farmers. Large companies (farmers) are more satisfied than small companies with the EGS. There was a high tendency for the companies (farmers) that are not involved with the EGS to think that graded and ungraded shell eggs are similar, in contrast to the companies (farmers) connected to the EGS. We should have to change the grading system of grade shell eggs, establish of the cold chain system, change of the law for the school meals, minimize payment for the grading shell eggs for developing EGS. Based on this study, the egg industry can benefit through the improvement of the EGS.

• Vending industry
• /
• v.2 no.5 s.6
• /
• pp.56-62
• /
• 2002

담배자판기의 신규설치를 금지하고 기존 설치된 자판기마저 전면철거하도록 하는 보건복지부의 초강력 규제안이 마침내 철회가 되게 되었다. 보건복지부는 올 들어 확대되는 금연정책에 편승, 기존 흡연 구역 내 담배자판기 신규설치를 금지하고, 기존 설치된 제품들마저 전면철거하는 규제를 담은 국민건강증진법 시행령 개정안을 지난 4월 공고하며 그 입법추진을 진행한 바 있다. 이 공고안은 그간 국무총리실 산하 규제개혁위원회 분과위원회에 상정되어 1,2차 심의를 진행해 오다 지난 9월 27일 본회의를 통해 '보건복지부의 흡연구역 내 담배자판기 신규설치 금지 및 기존 자판기 철거는 명백히 영업활동 자유 및 재산권 침해에 해당된다.'는 이유로 이를 철회토록 하는 결정을 진행했다. 이 결정을 담은 국민건강증진법 개정안은 조만간 법제처 심사 및 차관회의 등을 거쳐 최종 확정 되게 된다. 이같은 규제개혁위원회의 결정은 협회를 중심으로 한 산업의 적극적인 대응이 있었기에 가능했다. 성인인증장치 도입을 통해 청소년 흡연문제를 완전, 해결하겠다는 산업계의 적극적인 자율대책에도 불구하고 아예 담배자판기를 뿌리 채 뽑겠다는 보건복지부의 행정만능주의적인 발상은 도저히 수용하지 못할 부당한 처사라는 데 관련업계가 인식을 같이 했다. 따라서 이를 반대하는 산업계 입장을 분명히 하며 분명히 하며 적극적인 저지 대응을 최근까지 진행해 왔다. 협회에서는 1차적으로 보건복지부 건강증진과에 담배자판기 전면철거에 대한 산업계 반대 입장을 피력하는 소견서 제출하고 적극적인 산업계의 반대의지를 피력하는 작업을 진행했다. 또한 청소년보호위원회를 통해 청소년 흡연감소를 위한 성인인증 담배자판기 설치 활용방안 건의하며 담배자판기의 긍정적인 활용측면을 집중 부각시키기도 했다. 재정경제부를 통해서는 담배사업법 관련 담배자판기 설치기준에 대한 질의를 통해 현행 관련법 내에서의 설치기준을 명확히 하기도 했다. 이같은 대응에 있어서의 핵심 설득 논리는 담배자판기가 이제는 성인인증장치 부착을 통해 청소년 및 사회적 위해 요인을 극소화 할 수 있다는 점에 있었다. 과거와는 달리 담배자판기가 오히려 청소년의 담배 구입루트 차단이라는 긍정적 역할을 할 수 있는 시점에 있어 이를 전면규제하기보다는 합법적인 설치 환경을 확보하여 사회적으로 떳떳하게 존재가치를 평가받을 수 있게 해달라는게 산업계의 초지일관의 주장이었던 것. 협회는 이같은 주장이 결코 산업계의 이기만이 아니라 세계적인 추세라는 점, 또 담배자판기를 전면철거까지 하면서 과당규제를 할 명분이 부족하다는 점을 반대논리로 적극 내세웠다. 규제개혁위원회가 이번 공공 이용시설 중 흡연구역으로 지정된 장소 내에 담배자판기는 설치 금지 및 철거규제에 철회권고를 내리게 된 것은 이러한 산업계의 주장을 적극 수용함에 힘입은 바 크다. 규제개혁위원회는 이번 결정의 주된 이유로 우선 기설치된 자판기에 대한 철거는 재산권 침해로 위헌 소지가 있음을 들고 있다. 또한 흡연자를 위한 흡연구역내에서마저 자판기 설치를 금지하는 등의 규제는 과도하며 흡연자의 권익보호 역시도 필요함을 인정하고 있다. 따라서 전면적인 규제보다는 청소년 이용통제 가능한 흡연구역에 한하여 담배자판기를 설치토록한 현행규정의 실질적 관리를 강화하며, 전체적으로 흡연구역을 축소 제한하는 방향으로 추진함이 바람직하다는 의견을 제시했다. 규제개혁위원회의 이번 결정으로 흡연구역 내 담배자판기의 설치는 현행법의 적용을 받게 되며, 산업계의 자율대책대로 성인인증 장치를 부착한 담배자판기의 설치 확대가 크게 촉발될 수 있을 것으로 기대된다. 담배자판기가 적극적이고 능동적인 사회적 역할을 할 수 있을 때 자연 이를 반대할 수 있는 명분도 약해질 수 밖에 없다. 산업계는 보다 신뢰성 있게 청소년 이용을 차단할 수 있는 담배자판기 관련 기술 수준을 향상시켜야 할 것이며, 협회에서는 담배자판기의 공공성과 역할에 대한 지속적인 계몽 홍보를 통해 소비자 인식을 고양시켜 나갈 수 있게 해야 할 것이다. 비록 전면 규제 완화가 어렵고 힘든 길이기는 하지만 소비자에게 신뢰성을 부여하고 청소년의 담배 구입 루트 차단에 혁혁한 역할을 다할 수 있게 된다면 그 입지기반을 재평가 받을 수 있게 될 것이다. 담배자판기의 내일은 이제 암울함이 아닌 서서히 희망을 비치는 쪽으로 급선회되고 있다.

• (The)Study of the Eastern Classic
• /
• no.72
• /
• pp.35-66
• /
• 2018

This thesis has examined Jo Guimyeong's observation method and rhetoric of style of writing style. He tried to look at the world differently through observation and expressed relationship with the world through the style of comic. $J{\breve{o}}nggwan$ is a new way of looking at subjects and objects. It trust the senses and thoughts of the subject. So It is to clarify the circumstances and logic of the world from one's own point of view. In this case, it collides with the common thinking of the day. He put the reason and the action standard in the "taste" and the "mind". This means three things. First, he is proud that his reasons and actions are no different from those of a saint. Second, an individual is an independent being with different emotions and thoughts. Third, based on this, his works of literature have their own value. These reasons and actions were incarnated through '$J{\breve{o}}nggwan$(靜觀)'s observation methods. What he gained from the three stages of $J{\breve{o}}nggwan$(靜觀)' is the 'great mind'. The first step is self-reflection. It is the process of objectifying oneself. The second target is the appearance of things. It's about looking at everything equally, whether it's precious or vulgar. The third object of observation is a harmonic. He is joining the movement of the harmonizers. Therefore, one's own reasons, actions, and works of literature share the same meaning as those of a harmonizer. He said that the description can change according to his own knowledge. It means that you can fit the situation. A typical example was the analysis of 'Sung Bo hyung hwasangchan'<成甫兄畵像贊>. He described Park Moon-soo's life as the lives of officials through comic. Through this, He criticized Park Moon-soo's natural nature of the academic world. but the situation in which he can't escape from bureaucratic life by inducing laughter. This style of writing is one of the most representative features which was written by Jo Guimyeong writer.

• (The)Study of the Eastern Classic
• /
• no.72
• /
• pp.185-215
• /
• 2018

This paper discusses the Historical significance of Li-thought at the Hoejae, Lee-Eonjeok's Bongseonjabui. In this study, I tried to derive the value and meaning in the history of the Chosun Dynasty by examining the comparison between the Bongseonjabui and Book of Ancestor-memorial Ceremonies written in the 16th century The following is a summary of the Historical significance of Li-thought of Bongseonjabui. First, it is the first concrete result of the Chosun Dynasty concerning the Family Rituals. Second, it is characterized not only the description of actual procedures but also the explanations of both the theory and reality in Ancestor-memorial Ceremony. Third, it is an example of harmonizing with the national system and the customs of time by applying to the situation of Chosun society at that time. Fourth, it is an example that focuses on the essential meaning of the Ancestor-memorial Ceremony, not the attitude of one side the Zhu Xi's Family Rituals as in the later books.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1092-1099
• /
• 2022

Research on exhaust aftertreatment devices to reduce air pollutants and greenhouse gas emissions is being actively conducted. However, in the case of the particulate matters/nitrogen oxides (PM/NOx) simultaneous reduction device for ships, the problem of back pressure on the diesel engine and replacement of the filter carrier is occurring. In this study, for the optimal design of the integrated device that can simultaneously reduce PM/NOx, an appropriate standard was presented by studying the flow inside the device and change in back pressure through the inlet/outlet pressure. Ansys Fluent was used to apply porous media conditions to a diesel particulate filter (DPF) and selective catalytic reduction (SCR) by setting porosity to 30%, 40%, 50%, 60%, and 70%. In addition, the ef ect on back pressure was analyzed by applying the inlet velocity according to the engine load to 7.4 m/s, 10.3 m/s, 13.1 m/s, and 26.2 m/s as boundary conditions. As a result of a computational fluid dynamics analysis, the rate of change for back pressure by changing the inlet velocity was greater than when inlet temperature was changed, and the maximum rate of change was 27.4 mbar. This was evaluated as a suitable device for ships of 1800kW because the back pressure in all boundary conditions did not exceed the classification standard of 68mbar.