• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04b
• /
• pp.136-140
• /
• 2002

투과형 광 시야각 모드의 하나인 Fringe Field Switching (FFS) mode를 반사형 액정 디스플레이소자로 응용하여 전기 광학적 특성을 컴퓨터 시늉 하였다. FFS mode는 액정이 수평으로 균일하게 유지되면서 구동하므로, 시야각에 따른 굴절률 변화 역시 균일하게 유지된다. 이러한 특성 때문에 반사형 FFS mode는 부가적인 위상필름을 쓰지 않고, 액정층과 편광판 1매 만으로도 일정한 수준의 반사형 디스플레이 특성을 얻을 수 있다. 컴퓨터 시늉을 통해 1매 편광판과 액정층, 반사판으로 구성된 Normally Black모드의 셀 구조를 취하고, 셀 간격을 일정하게 유지하면서 액정의 ${\Delta}n$을 변화시켜 특성을 구하는 방식으로 수행하여, 입사광의 파장이 550nm일때 최적의 셀 위상차값으로 $d{\Delta}n$인 $0.1365{\mu}m$를 얻었다. 입사광원을 $0^{\circ}C$로 하고 편광판 투과율이 41%였을 때 정면 반사율은 on시 33.6%, off시 0.14%로 명암대비가 233:1이었다. 특히 시야각은 극각 $60^{\circ}C$이내의 전 방향에서 명암 대비비가 5이상의 특성을 보였다.

• Polymer(Korea)
• /
• v.32 no.3
• /
• pp.290-294
• /
• 2008

Induction mechanism of molecular orientations for a rubbed polymer film as an alignment layer was investigated using polarized UV/Vis spectroscopic experiments for polyimide and polyvinylcinnamate whose conjugated electrons are located along main chain and side chain, respectively. By determining anisotropy formed in the rubbed film, LC director formed in the LC cell, and orientation direction of deposited pentacene molecules, it was found that LC orientation was induced mainly by molecular interactions whereas surface microgrooves formed by the rubbing process affect the orientation direction of deposited pentacene molecules.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.2
• /
• pp.85-89
• /
• 2014

We propose the new fabrication method of a 70 nm half-pitch wire grid polarizer with high performance using magnetic soft mold. The device is a form of aluminium gratings on a PET(Polyethylene phthalate) substrate whose size of $3cm{\times}3cm$ is compatible with a TFT_LCD(Tin Flat Transistor Liquid Crystal Display) panel. A magnetic soft mold with a pitch of 70 nm is fabricated using two-step replication method. As a result, we get a NWGP pattern which has 70.39 nm line width, 64.76 nm depth, 140.78 nm pitch, on substrate. The maximum and minimum transmittances of the NWGP at 800 nm are 75% and 10%, respectively. This work demonstrates a unique cost-effective solution for nanopatterning requirements in consumer electronics components.

• Elastomers and Composites
• /
• v.44 no.2
• /
• pp.175-181
• /
• 2009

The solution polymerization was conducted to synthesize pressure sensitive adhesive for polarizer film using acrylic monomers. 2-Ethylhexyl acrylate, butyl acrylate, acrylic acid were used as acrylic monomers, benzoyl peroxide as initiator, ethyl acetate as solvent. The ratio of monomers was 2-ethylhexyl acrylate: butyl acrylate: acrylic acid = 25:50:3.6 reflecting $-40^{\circ}C$ of glass transition temperature in the pressure sensitive adhesive. The amount of initiator was determined as 0.09% to monomer considering wetting power and initial tackiness. The ratio of monomer to solvent was determined as 1:1.7 considering wetting power and transmissivity. The transmissivity of pressure sensitive adhesive increased with decreasing both viscosity and molecular weight due to reducing of refractive index by low entanglement between molecules. In the measurement of pot life, it was found that the storage stability was good at 1:1.7 of monomer: solvent without large change of viscosity during 200 min.

• Polymer(Korea)
• /
• v.25 no.1
• /
• pp.115-121
• /
• 2001

High molecular weight syndiotactic poly(vinyl alcohol)(HMW s-PVA) with number-average degree of polymerization of 10000 and syndiotactic diad content of 61.5%/iodine complex film was prepared. Its adsorption and desorption behaviors of iodine in hot water were investigated. In comparison with atactic PVA film or low molecular weight s-PVA film, the degree of solubility of s-PVA film and the iodine desorption of HMW s-PVA/iodine film in hot water were limited to an extremely lower level. As the soaking time increased, the iodine desorption in hot water was increased. This reason might be explained by the fact that as the soaking time increased, so the iodine adsorption increased not by the stable molecular complex between PVA and iodine but by the simple physical adsorption of iodine.

• Korean Journal of Optics and Photonics
• /
• v.18 no.6
• /
• pp.421-425
• /
• 2007

A new 3D rear projection display system using double-layer polarization-selective screen systems, one stacked in front of the other, has been developed. The front and rear screens are made of scattering polarizer films, and they either diffuse-scatter or transmit the incident light depending on the polarization state of the light. The near and for images are projected onto the front and rear screens, respectively, using light waves with mutually orthogonal polarization states. The new display system produces clear high-resolution images, which are visible over a wide range of viewing angle. It was found that the impression of depth is pronounced and eyestrain is only comparable to that by 2D display systems.

• Korean Journal of Optics and Photonics
• /
• v.22 no.2
• /
• pp.90-95
• /
• 2011

We propose a super-thin and light-weight liquid crystal cell, in which glass substrates are eliminated and polarizers are used as substrates. We fabricate a polarizer substrate by depositing a-SiOX as a buffer layer, indium-tin-oxide as a transparent conducting layer, and a-SiOX as an alignment layer on a polarizer sequentially at a low temperature. We use the ion-beam method to align liquid crystals on polarizer substrates.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.104-107
• /
• 2003

Poly(vinyl alcohol) (PVA) obtained by the saponification of poly(vinyl ester) like poly(vinyl acetate) o. poly(vinyl pivalate) is a linear semicrystalline polymer, which has been widely used as fibers for clothes and industries, films, membranes, medicines for drug delivery system, and cancer cell-killing embolic materials[1-3]. PVA fibers and films have high tensile and compressive strengths, high tensile modulus, and good abrasion resistance due to its highest crystalline lattice modulus. (omitted)

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.4
• /
• pp.1-6
• /
• 2012

Keeping the polarization direction of the projection light unchanged is of crucial importance for high quality of images on a double-screen 3D projection display system. It has been found that the deposition of oxide layers on the surfaces of scattering polarizer film results in an improvement of polarization maintenance property of the film. The secondary image formed on the front screen by the light scattered from the rear screen decreases by 30% through the application of oxide layers on both surfaces of the screen. Since the oxide layer can also be used as an anti-reflection (AR) coating of the film, this method is very effective for the projection display applications.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.208-209
• /
• 2000

기존의 CRT(cathode-ray tube)를 사용한 TV, 모니터와 같은 디스플레이는 부피가 커서 공간을 많이 차지하고 휴대품으로는 거의 사용이 불가능하였다. 그러나, 평판 디스플레이의 하나인 LCD(liquid crystal display)는 소비 전력이 작고 부피가 작아서 게임기, Note-book PC와 같은 휴대용으로는 물론 PC용 모니터와 같은 사무용 디스플레이, TV와 같은 가정용 디스플레이를 대체해 나가고 있다. (중략)