• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.3
• /
• pp.291-297
• /
• 2014

Due to the rapid increase in demand for transportation of human and freight in modern railway systems, the CBTC system has been proposed, which is the solution for improvement of the line capacity that has been limited by the conventional track circuit based train control system. In the CBTC system, higher reliability of the communication system should be guaranteed for the safety of passengers and trains. However, due to the inherent characteristics of the wireless channel environment, performance degradations are inevitable. The diversity techniques can increase the reliability of data transmission using multiple antennas. In this paper, we investigate the performance of the STBC in the railway channel environment. Rician fading model is used for the viaduct scenarios which take important roles in the railway system. Also, considered is the Doppler effect which is an important factor in the mobile communication system. Simulations are performed to analyze the performance of the STBC in various channel environments. Results show that the performance degradation due to the phase error in viaduct scenarios is independent of the diversity order but is affected by the constellation of the modulation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.799-804
• /
• 2016

Broadband powerline communication (BPLC) uses distribution lines as a medium for achieving effective bidirectional data communication along with electric current flow. As the material characteristics of power lines are not good at the communication channel, the development of power line communication (PLC) systems for internet, voice, and data services requires measurement-based models of the transfer characteristics of the network suitable for performance analysis by simulation. In this paper, an analytic model describing a complex transfer function is presented to obtain the attenuation and path parameters for a multipath power line model. The calculated results demonstrated frequency-selective fading in multipath channels and signal attenuation with frequency, and were in good agreement with the experimental results. Inductive coupling units are used as couplers for coupling the signal to the power line to avoid physical connections to the distribution line. The inductance of the ferrite core, which depends on the frequency, determines the cut-off frequency of the inductive coupler. Coupling loss can be minimized by increasing the number of windings around the coupler. Coupling efficiency was improved by more than 6 dB with three windings compared to the results obtained with one winding.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.10
• /
• pp.967-973
• /
• 2014

WAVE (Wireless Access in Vehicular Environments) communications is the core technology for C-ITS (Cooperative-Intelligent Transportation System) which communicates with the road infrastructure and other vehicles to exchange traffic information and service while driving. In this paper, to analyze the performance degradation according to the distance between WAVE communication terminals, we derived the formulas for the locations of down-fade and up-fade points by using the two-ray ground reflection model, and verified these theoretical results by comparing with those of RSSI (Receiver Signal Strength Indicator) measurements. In addition, to solve the problem of down-fade, we suggested the WAVE communication with the antenna diversity and experimentally confirmed the performance improvement in the highway LOS (Line Of Sight) environments.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.4
• /
• pp.112-120
• /
• 2006

Multicarrier code division multiple access(MC-CDMA) system that combines multicarrier modulation with CDMA offers robustness to frequency selective fading and can support higher rate data transmission with higher spectral efficiency. A new asynchronous MC-CDMA system to implement multiple data rate communications is proposed in this paper. In a W-CDMA downlink the orthogonal variable spreading factor(OVSF) code is used for variable spreading factor for various multimedia traffic. Proposed system utilizes the OVSF code that generated by generation property for spreading. The proposed MC-CDMA system use different lengths of OVSF code as a spreading code according to their data rate. The groupwise processing is accomplished by code grouping in OVSF code generation tree. For the analysis of average BER performance, numerical method and computer simulation were used. We also compare the system performance with that of a single rate MC-CDMA system used orthogonal code as a spreading code.

• Journal of Advanced Navigation Technology
• /
• v.14 no.1
• /
• pp.33-40
• /
• 2010

In this paper, the bit-error-ratio (BER) performances of Digital Radio Mondiale Plus (DRM+) system which stand for the European standard to bring analogue FM radio to digital radio in Band-II(30-170 MHz) are evaluated under multipath fading channel models used in Band-II and the adjacent channel interference (ACI) caused by FM signal. From the simulation results, the DRM+ system shows robust performances under time-varying channel environments even though the speed of a vehicle is equal to 300km/h. And it is shown that the frequency diversity, determined by delay spread of multipath fading channel, increases the coding gain of the DRM+ system with an increase of delay spread. In addition, to guarantee the BER performance of 10-4 for DRM+ system with ACI due to FM signal, the simulation results show that the desired signal-to-ACI power ratio must be more than -30 dB when the carrier frequency distance is 150 kHz.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.141-145
• /
• 2017

Spectrum sensing is a critical functionality of Cognitive Radio(CR) systems and the CR systems can be applied to RF energy harvesting systems to improve an energy harvesting rate. There are number of spectrum sensing techniques. One of techniques is energy detection. Energy detection is the simplest detection method and is the most commonly used. But, energy detection has a hidden terminal problem in real wireless communication, because of secondary user (SU) can be affected by frequency fading and shadowing. Cooperative spectrum sensing can solve this problem using spatial diversity of SUs. But it has a problem of increasing data by processing multiple secondary. So, we propose the system model using adaptive spectrum sensing algorithm and system model is simulated. This algorithm chooses sensing method between single energy sensing and cooperative energy according to the received signal's Signal to Noise Ratio (SNR) from Primary User (PU). The simulation result shows that adaptive spectrum sensing has an efficiency and improvement in CR systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.7
• /
• pp.1425-1431
• /
• 2005

In this paper, we consider the ISR(Intelligence, Surveillance, and Reconnaissance) system which collects the imagery intelligence from an airplane and CDL(common data link) communication system which transports the information obtained by the ISR system. The IMINT(imagery intelligence) consists of MPEG-2 transport stream packets and they transmit through CDL. We have some simulations for communication performances of CDL and show performance improvements using convolutional coding. We have compared BER performances under AWGN channel and fading channel which is caused by the velocity of an airplane.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.59-68
• /
• 2017

Random process plays a major role in wireless communication system to analytically derive the probability distribution function of the various statistical distribution. In this paper, we derive the decreasing function of the exponential distribution under the given condition which is expressed as wireless channel condition. The probability distribution function of Gaussian, Laplacian, Rayleigh and Nakagami distribution are also derived. Extensive simulation results of these statistical distributions are provided to prove that random process has a significant role in the wireless communications. In addition, the Rayleigh and Rician channels show specific examples of visible distance communication and invisible distance channel environment. This paper is motivated by that we assume a block fading channel model, where the channel is constant during a transmission block and changes independently between consecutive transmission block, can achieve a better performance in high SNR regime with i.i.d channel. This algorithm for realizing these transforms can be applied to the Kronecker MIMO channel.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.10 s.352
• /
• pp.27-34
• /
• 2006

This paper has implemented a very small($1.4{\times}2.8[Cm^2]$) 13.56[MHz] RFID reader ensuring machine ID recognition correctly in a noise space of Tag-to-Reader within 3Cm. For operation of the RFID system, at first, this paper has designed the loop antenna of a reader and the fading model of back-scattering on microwave propagation following to 13.56[MHz] RFID Air Interface ISO/IEC specification. Secondly, this paper has proposed the automatically path selected RF switching circuit and the firmware operation relationship by measuring and analyzing the very small RFID RF issues. Finally, as a very small reader main body, this paper has shown the DSP board and software functions made for extraction of $1{\sim}2$ machine ID information and error prevention simultaneously with carrying of 13.56[MHz] RFID signals that the international standard specification ISO/IEC 18000-3 defined.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.69-74
• /
• 2014

In this paper, an energy harvesting scheme is investigated in the multi-relay cooperation communication. Our proposal is to maximize the diversity gain and overcome the disadvantages of the limited power wireless devices. The best relay is selected based on the maximizing channel gains from source to relays so that the harvested energy at selected relay is best. If an internal power of the best relay is lower than a defined target power, the best relay will harvest the energy from the source, and the help of the source-destination link is changed to the second best relay. By this operation method, the diversity gain is maintained and the performance of the network is improved. Finally, performance of the proposed protocol is analyzed in terms of bit error rate, utilization efficiency, power collection efficiency.