• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.70-71
• /
• 2000

세슘빔 공진기에서 세슘D$_2$ 전이선으로 광펌핑된 원자가 램지공진기에서 마이크로파의 주파수에 따른 초미세준위의 바닥상태간의 원자밀도 전이에 의한 형광 신호의 분포를 펌핑광의 세기에 따라 관측하였다. 펌핑광의 편광방향이 자기장에 나란한 $\pi$편광일 때 각 제만부준위의 마이크로파 전이 신호는 mF=0을 중심으로 $\pm$mF의 신호세기가 대칭적이었으나 펌핑광의 편광 방향이 자기장에 수직인 $\sigma$ $\pm$ 인 경우에는 비대칭적임을 확인하였다. 이것은 펌핑광의 주파수가 세슘빔 공진기에서의 세슘공진주파수에서 detuning이 있는 것에 의한 것으로 예상하였다. 이를 확인하기 위해 원자밀도행렬방정식으로 세슘빔공진기에서 마이크로파 전이신호를 계산하였다. 펌핑광의 세기와 편광방향, detuning에 따른 마이크로파 전이신호의 분포가 실험치와 잘 일치함을 알 수 있었다. 이 연구는 세슘빔 원자공진기에서 펌핑광의 주파수가 세슘공진주파수에 detuning된 정도를 관측할 수 있는 방법을 제시해 준다. (중략)

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.413-420
• /
• 2020

In this study, a new lab-scale test equipment was developed to evaluate the variation of concrete workability after pumping. The equipment was designed to simulate the pressure and shearing applied to concrete during actual pumping. In order to examine the feasibility of evaluating variation of concrete workability through lab-scale test equipment, real-scale pumping tests and lab-scale tests were performed together. The design strength of concrete used in the both tests was 24, 35, and 60MPa, and the length of pipe used in pumping tests was 130, 304, and 518m. The lab-scale tests were performed in consideration of actual pumping conditions(pressure, shearing, and pumping duration time). The workability(slump or slum flow) of concrete was measured before test, after the pumping test, and after lab-scale test. In all tests, workability of all concrete mixtures decreased. In addition, the results of both tests were measured greatly similarly.

• Korean Journal of Optics and Photonics
• /
• v.3 no.4
• /
• pp.222-226
• /
• 1992

The lasing characteristics of a Nd:phosphate glass laser pumped by 514 nm of an $Ar^{+}$ laser has been investigated. The oscillator consists of a Nd:glass gain medium set at Brewster angle, and two concave mirrors, and a flat mirror with a reflectance of 98%. The $Ar^{+}$ laser pumping beam is focused longitudinally at the beam waist of laser mode for efficient pumping. The pumping beam is chopped at 100 Hz to reduce the heat loading to prevent the thermal damage of the gain medium by the latent heat from the absorbed pumping beam. The maximum laser output power of 70 mW at 1.5 W pumping and the threshold input power of 520 mW have been obtained.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.117-117
• /
• 2013

레이저 레이더용 시력안전파장대 고출력 광펄스 생성을 위한 광원으로 MOPA 구도로 광섬유 레이저를 제작 하였다. MOPA 기반 펄스 광섬유 레이저는시력 안정 파장대인 1,550 nm 대역 파장을 갖고 펄스폭이 2 ns 이하이며 반복률이 30~240 kHz 가변 가능하다. 광섬유 증폭단에서 1단 증폭기는 저잡음용 코어 펌핑 방식의 증폭기로 구현하였으며, 2단 증폭기는 중출력 증폭기로 코어 펌핑구조에 후방향 펌핑 구도로 설계하였다. 3단 증폭기는 최종목표인 2ns 이하의 펄스 폭 및 25 kWp 이상의 첨두출력을 달성하기 위하여 클래딩 펌핑 방식의 고출력 광증폭기로 구현하였다.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.986-988
• /
• 2004

이 전에 DC Pulse 전류로 구동하는 Magnetic Fluid Linear Pump(MFLP)를 개발하였다. 개발된 MFLP는 DC Pulse 전류에 의하여 발생하는 자기장의 분포 변화가 불연속적이게 되고, 펌핑력 또한 불연속성을 가지게 된다. 불연속적 자기장의 변화와 펌핑력의 불균일성을 저감하였다. 펌핑력을 증가시키기 위하여 AC 전류를 이용하였으며, 이에 따른 펌프의 운전 특성을 파악하기 위하여 자기장의 분포와 자성유체의 형상을 해석하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1266-1274
• /
• 2006

A non-overlap boosted-clock charge pump(NBCCP) with internal pumping capacitor, an advantageous circuit from a minimizing point of TFT-LCD driver IC module, is proposed in this paper. By using the non-overlap boosted-clock swinging in 2VDC voltage, the number of pumping stages is reduced to half and a back current of pumping charge from charge pumping node to input stage is also prevented compared with conventional cross-coupled charge pump with internal pumping capacitor. As a result, pumping current of the proposed NBCCP circuit is increased more than conventional cross-coupled charge pump, and a layout area is decreased. A proposed DC-DC converter for TFT-LCD driver IC is designed with $0.18{\mu}m$ triple-well CMOS process and a test chip is in the marking.

• Korean Journal of Optics and Photonics
• /
• v.4 no.3
• /
• pp.289-293
• /
• 1993

A Nd:YLF laser pumped by a CW GaAlAs laser diode(LD) at 792 nm has been designed and fabricated. The output power was investigated as a function of LD spectrum and pump power. A folded laser resonator was desinged to compensate for the astigmatism produced at the Brewster surface of Nd:YLF rod. We obtained output power of CW 1.1 Watt when the pumping power was 2.8 Watt and the output wavelength of LD was temperature tuned to the peak absorption line of Nd:YLF. The overall efficiency was 39 % and slope efficiency was 41 %.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1899-1909
• /
• 2007

A cross-coupled charge pump with internal pumping capacitor, witch is advantages from a point of minimizing TFT-LCD driver IC module, is newly proposed in this paper. By using a NMOS and a PMOS diode connected to boosting node from VIN node, the pumping node is precharged to the same value each pumping node at start pumping operation. Since the lust-stage charge pump is designed differently from the other stage pumps, a back current of pumped charge from charge pumping node to input stage is prevented. As a pumping clock driver is located the font side of pumping capacitor, the driving capacity is improved by reducing a voltage drop of the pumping clock line from parasitic resistor. Finally, a layout area is decreased more compared with conventional cross-coupled charge pump by using a stack-MIM capacitors. A proposed charge pump for TFT-LCD driver IC is designed with $0.13{\mu}m$ triple-well DDI process, fabricated, and tested.

• 전기의세계
• /
• v.33 no.6
• /
• pp.371-376
• /
• 1984

본고에서는 새로 개발된 HCP의 구조와 특성을 소개하고 Iodine레이저, Xe 레이저 및 색소레이저를 펌핑하는데 이 장치가 어떻게 이용되는 가를 간단히 기술하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1249-1255
• /
• 2008

1530nm band has been studied as pump wavelength for long-wavelength-band erbium-doped fiber amplifier (L-band EDFA). The pump source is built using a tunable light source and cascaded conventional-band (C-band) EDFA. The L-band EDFA uses a forward pumping scheme. Within the 1530nm band, 1545nm pump demonstrates 0.45dB/mW gain coefficient, which is twice better than that of conventional 1480nm pumped EDFA. The noise figure of 1530nm pump is at worst 6.36dB, which is 0.75dB higher than that of 1480nm pumped EDFA. Such high gain coefficient indicates that the L-band EDFA consumes low power.