• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.1
• /
• pp.102-110
• /
• 1998

The analysis of lateral hydrodynamic forces in the leakage path between a shrouded pump impeller through wear-ring seal and its housing is presented. Governing equations are derived based on Bulk-flow and Hirs' turbulent lubrication model. By using a perturbation analysis and a numerical integration method, governing equations are solved to yield leakage and rotordynamic coefficients of force developed by the impeller shroud and wear-ring seal. The variation of rotordynamic coefficients of pump impeller shroud and wear-ring seal is analyzed as parameters of rotor speed, pressure difference, shroud clearance, wear-ring seal clearance, and circumferential velocity at the entrance of impeller shroud for a typical multi-stage centrifugal pump.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1206-1210
• /
• 2006

본 연구에서는 천수방정식을 지배방정식으로 하고, 유한 체적법에 기반을 둔 FLUMEN 수치모형을 이용하여 홍수범람 모의를 수행하였다. 본 연구의 대상유역은 평택시 내에 있는 상수침수지역인 안성천과 통복천의 합류지점을 선정하였다. 대상유역에서 외수침수의 조건으로 범람이 되었을때와 도시유출(urban runoff)경계조건을 가미하여 내수침수로 인해 도시내 침수가 발생했을 시에 모의된 침수결과를 비교.검토하였다. 또한 도시유출로 인한 내수침수시에 도시내 배수펌프의 원활한 작동유무의 영향을 모의하였다. 모의된 결과를 살펴보면, 외수침수만을 고려하여 모의된 결과와 내수침수 조건을 가미한 모형의 결과는 도시내 침수면적과 침수심에서 확연한 차이가 나타남을 알 수 있었다. 또한 배수펌프의 유무에 따라 도시내의 침수심 부분에 있어서 많은 차이를 보임을 알 수 있었다. 본 모형의 결과는 향후 실제 지형에서의 홍수 피해를 예측하는 경우 하천 범람과 더불어 근래의 급격한 도시화에 따른 도시유출을 동시에 감안하여 그 피해를 최소화 할 수 있는 기초자료로 이용되어 질 수 있을 것으로 사료된다.

• Explosives and Blasting
• /
• v.19 no.3
• /
• pp.115-117
• /
• 2001

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.38 no.12
• /
• pp.34-37
• /
• 2009

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2001.10a
• /
• pp.219-222
• /
• 2001

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.10a
• /
• pp.147-147
• /
• 1998

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.10a
• /
• pp.110.2-110
• /
• 2001

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.1
• /
• pp.64-77
• /
• 2020

An electric-pump cycle, which is a propellant supply system for driving pumps of a liquid rocket engine using an electric motor, has the advantages of simple system configuration and easy control of supply flow rate and pressure. This paper investigates and analyzes the overseas research trends of the electric-pump cycle. In addition, the research and development country, performing organization, application, engine thrust, pump pressure increase, motor power, and rotation speed are summarized. Among them, the design variables of the overseas research that applied the upper-stage propulsion system with the thrust range of 0.445~2.2 kN could be used in the study of a similar electric-pump cycle in Korea.

• Journal of Energy Engineering
• /
• v.27 no.4
• /
• pp.70-79
• /
• 2018

A heat pump system using the thermal effluent from the Jeju thermal power plant of KOMIPO was constructed with the capacity of 300 RT to supply cool or hot water to greenhouse facilities located 3 km from the power station. The way of transporting heat from the thermal effluent to greenhouses at a long distance was optimized, and a monitoring system to measure the water temperature and detect a leakage in a pipe conduit was also installed. This paper presents the system configuration of the constructed heat pump system for air conditioning and heating of greenhouse facilities in Jeju, and the characteristics of major components deployed in the system. The preoperational tests of the heat pump system were conducted during the summer season in 2018 for evaluation of its cooling performance. The operational stability and cooling performance of the heat pump system were confirmed by investigating the measured fluid temperature and flow rate, and COP of the heat pump in a cooling mode.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.91-91
• /
• 2011

본 개발에서는 초고속 복합 분자펌프 구동을 위한 디지털 구동장치를 설계 하였다. 초고속 모터구동을 위한 핵심제어 보드 설계 및 모듈을 설계하여 기본성능을 평가하였다. 또한 초고속 전동기 운전시 급가속 성능을 향상 하기 위해 홀센서에 의한 위치측정 오차를 최소화하는 관측기를 설계하여 모터제어기를 설계하여 고속회전 시험을 하였다. AMB 구동을 위한 전류제어기를 제작하여 성능시험을 하였다. AMB 구동을 위한 와전류식 변위센서 구동부를 설계 제작하였다.