• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.74-77
• /
• 2000

A pulsed Nd:YAG laser has been used in a wide variety of fields : measuring, material processing and so on. In a material processing, it is very important to control the laser energy density. A pulse repetition rate and a pulse width are regarded as the most dominant factors to control the energy density of laser beam. In this study, pulsed Nd:YAG laser system was designed and manufactured to control the laser output usefully and easily. This system adopted the sequential charge and discharge circuit is controlled by 80196 micro- processor. As a result, it is found that laser output is controlled minutely by changing laser input and pulse repetition rate, and usefully by using 80196 microprocessor.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.449-454
• /
• 1996

원자력발전소 증기발생기 전열관의 레이저 슬리브 용접시, 레이저 전송 및 용접상태의 광학적 감시방법을 개발하였다. 전열관 레이저용접은 용접 중의 레이저 출력, 레이저 전송 광학계의 파손여부, 광학 정렬상태 등을 정확히 감시하며 수행하여야 하지만, 작업공간의 협소함과 방사능 공간이라는 어려움 때문에 적절한 감시방법이 없었다. 본 연구에서는 레이저 빔 전송을 위한 광섬유 광학계를 그대로 이용하여, 용접시 발생되는 radiation과 용접 표면에서 반사되는 Nd:YAG 레이저 빔을 측정하여 레이저 및 광학계 상태를 실시간 감시할 수 있는 기술을 실험적으로 확인하였다. 실험은 Inconel plate를 시편으로 이루어졌으며, 레이저 펄스길이, 레이저 반복률에 따른 감시 조건과 초점확인 기능에 대해서도 논의하였다.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1696-1698
• /
• 1998

Pulsed Nd:YAG laser using Nd:YAG crystal operates stably in the thermal conductivity, mechanical, optical condition. That is used broadly in material processings because of easy reaction to the materials, and the maintenance is very easy because of lamp excitation. In these material processings, power dinsity control is very important to improve processing technology. Power density is controled by inductance and capacitance or repetition rate. Therefore we are going to control laser power density as One-Chip Microprocessor(PIC16C55) and 8051. We have been experimented at the pulse repetition rate range of 10pps to 60pps(pulse per second).

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1900-1902
• /
• 1997

In order to obtain various waveforms of current pulse applied at the flashlamp, we have fabricated a Pulsed Nd:YAG laser by PFN with multiple-mesh formed LC network. we have obtained various waveforms of current pulse by adjusting the values of L and C, compared these waveforms of current pulse with laser beam, and then analyzed the laser output energy. We have got relations for $E_{TH}$ and $E_L$ at each mesh which supplies energy with flashlamp and found that output of Pulsed Nd:YAG Laser for 2-mesh, 5-mesh coincided with computer's simulation, PSPICE.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.524-527
• /
• 2000

In this paper, we have studied minimization of the burr which occurred after $\mu$-BGA(ball grid array) singulation process, singulation of the multilayer with a pulsed Nd:YAG(266, 532 nm) laser is used to cut the metal layer which doesn't well absorb laser beam. Especially, the photoresist and $N_2$blowing is effective to minimize of the surface demage and burr. In this experiment, the $N_2$ blowing reduces a laser energy loss by debris and suppress a surface oxidation. The SEM(scanning electron microscopes) and non-contact 3D inspector are used to measure cutting line-width and surface demage. The $\mu$-BGA singulation threshold energy is 75.0 J/cm$^2$at 30 ${\mu}{\textrm}{m}$/s scan speed.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.108-109
• /
• 2000

현재 많은 종류의 레이저가 학술적으로나 산업계에서 다양하게 사용되고 있다. 그리고 그 중에서도 자외선 레이저의 필요성이 한층 강조되고 있는 시점이다. 사용되고 있는 자외선 레이저는 Eximer 레이저, Nd:YAG의 제3고조파, 다른 레이저로 펌핑한 색소 레이저등이 그 주류를 이루고 있다. 하지만 이들 레이저들은 값이 아주 고가이거나 그 출력이 매우 낮아 새로운 방식의 레이저를 요구하고 있다. 그래서 본 실험실에서는 여러 용도로 사용 가능한 펄스형 고출력 색소 레이저를 개발하고 있다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.2 no.1
• /
• pp.13-19
• /
• 1991

Utilizing self-phase modulation effects of a dispersion-shifted fiber and delayline characteristics of two gratings, mode-locked 80 ps pulses at 1.319 $\mu \textrm m$ wavelength from a Nd:YAG laser are compressed to 2.1 ps. This experiment is suitable for studying the transmission characteristics of high energy short pulses along normal fibers in zero dispersion regime.

• Korean Journal of Optics and Photonics
• /
• v.11 no.5
• /
• pp.365-370
• /
• 2000

We have constructed a collinear four pass Ti.sapphire laser amplifier by usmg polmization effect When we pumped the mnplifier with 188 mJ second harmonics of Q-switched Nd:YAG laser, we observed that a 450 mW 1l1cident cw Ti:sapphire laser beam is amphfled to pulse with energy of 34 mJ and pulse width (FWffM) of 25 os. We could mmllmze the a.mplified spontaneous emission by simple method of rotating the Tbapphire amplifier rod er rod

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1105-1111
• /
• 2011

The objective of this study is to investigate the influence of surface roughness on the morphology of aluminum 6061-T6 alloy after irradiation with a Nd:YAG pulsed laser. The test specimen was prepared by a polishing process using a diamond paste ($1{\mu}m$) and emery polishing papers (#100, #220, #600, #2400) to obtain different initial surface roughness. After irradiation with ten pulsed-laser shots, the surface morphology was examined by using scanning electron microscopy (SEM), optical microscopy (OM), and atomic force microscopy (AFM). The diameter of the melted zone increased with the surface roughness because the multiple reflections and absorption of the laser beam occurred on the surface because of the surface roughness, so that the absorptance of the laser beam changed. This result was verified using the relative absorptance calculated from the diameter of the melted zone with the surface roughness and the diameter increased with the average surface roughness.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.777-783
• /
• 2001

This paper is mainly concerned with the state of the practical developments of a constants PWM bridge type resonants DC-DC suitable converter for Nd:YAG Laser with a Microprocessor. (PIC16C54 & 8051) The use of IGBT power supply with feedback control of flashLamp currents imparts a advantages to Nd:YAG Laser for materials processing. these include the alility to tailor the pulseshape and modify pulse parameters on a pulse- by pulse basis. And Correct choice of pulseshape can enhance the repeatability of the process. as higher power IGBT became available, act ive pulseforming power supplies will find greater user in deep hole drilling machine By Using certain control tecniques, utililized in designing Pic16c54 from Microchip technology and Intel 8051, also Mornitoring from Microsoft Visual Basic 5, And it allowed us to designed and fabricate ahigh repel it ion rate and high power(HRHP) pulsed Nd:YAG laser system, As a result of that, the current pulsewidth could be contort led 200s to 350s(step 50s) , and the pulse repetition rate could be adjusted 500pps to 1150pps. In addition, in the case of one laser head consisting of a Nd:YAG laser rod and two flashlamps , the maximum laser output of 240w was produced at the condition of 350s and 1150pps, and that of about 480w was generated at the same condition when two laser heads were arranged in cascade.