Proceedings of the Korean Society of Propulsion Engineers Conference
/
2011.11a
/
pp.666-669
/
2011
The rupture disc shapes of bulkhead type pulse separation device(PSD) are designed for new dual pulse rocket motor. Before final design PSD, that three different rupture disc are tested and confirmed the performance of the discs. Through analyzing the test results the PSD decides, two rupture disc shapes with flow holes of eight circles and eight trapezoids.
펄스 도금 조건이 Co 도금층의 미세 구조 및 알칼리 $NaBH_4$ 용액의 수소발생특성에 미치는 영향을 조사하였다. 펄스 주기 및 최대전류밀도가 증가함에 따라 polyhedral 형상의 Co 결정립이 triangular형상으로 변화하였으며, 점차 결정립이 조대화 되어, 촉매 표면적이 감소하였다. 결국 알칼리 $NaBH_4$ 용액 내에서 가수분해반응에 참여하는 촉매 site가 감소하여 수소발생속도가 낮아졌다. 펄스도금시간이 증가함에 따라 Co 결정립의 크기가 점차 증가하여 촉매 표면적이 감소하였고, 가수분해반응에 참여하지 못하는 CO의 양이 증가하여 수소발생속도가 크게 감소하였다. 최대전류밀도 $0.1\;A/cm^2$, 펄스 주기 2 mS에서 10 s 동안 펄스 도금 시, $25^{\circ}C\;1\;wt.\%\;NaOH\;+\;10\;wt.\%\;NaBH_4$ 용액에서 $2140\;ml/min{\cdot}g-catalyst$의 높은 수소발생속도를 가지는 것으로 나타났다.
Journal of the Korea Institute of Information and Communication Engineering
/
v.25
no.1
/
pp.81-87
/
2021
In this study the skin care system was designed and tested by introducing V-IPL(Variable-Intense Pulse Light) methods that allow various skin treatments. The discharge method, a new method of switching on the flash lamp sequentially according to the lesions, was used. Pulse shape control is implemented in the system using the conventional LC variable method and the switching method control method of the switching element. As a result, the pulse width could be varied up to 1[㎛] by using a microprocessor, and by turning on the flash lamp sequentially along the lesions the depth and width, the pulse shape and pulse shape could be more diverse. We could also make long pulses of up to 1~100[ms] in various pulse width. And the special differences between the existing system and the proposed system in this study are as follow. Existing system is one pulse(pulse width : 1~40ms) and proposed system is three pulse(pulse width : 1~100ms).
Park, Ju-Hong;No, Gang-Hyeon;Lee, Seong-Hyeon;Choe, Gyeong-Hun;Jo, Gwan-Sik;Lee, Je-Won
Proceedings of the Korean Vacuum Society Conference
/
2010.08a
/
pp.105-105
/
2010
펄스 DC $O_2$플라즈마를 이용하여 PMMA와 폴리카보네이트 기판을 건식 식각 한 후 그 결과에 대하여 분석하였다. 식각 공정 변수는 펄스 파워 (300~500 V), 펄스 시간 ($0.5{\sim}2.0\;{\mu}s$), 펄스 주파수 (100~250 kHz)의 변화이었다. 특성 분석은 PMMA와 폴리카보네이트의 식각률, 두재료의 포토레지스트에 대한 식각 선택도, 식각 후 표면 거칠기 변화에 대해 실시하였다. 또한 주사 전자 현미경을 이용하여 식각 후 패턴의 표면 형상을 관찰하였다. 실험 결과, PMMA의 식각률이 폴리카보네이트보다 높음을 알 수 있었다. 펄스 파워를 300 V 에서 500 V로 증가함에 따라 PMMA의 식각률은 $0.17\;{\mu}m/min$ 에서 $0.53\;{\mu}m/min$ 로 증가하였다. 폴리카보네이트는 같은 식각 조건에서 $0.09\;{\mu}m/min$ 에서 $0.22\;{\mu}m/min$ 로 증가하였다. 그 이유는 폴리카보네이트의 경우, 결합력이 큰 벤젠 분자 구조를 포함하고 있기 때문에 PMMA보다 식각률이 더 낮다고 추측한다. 또한 PMMA 와 폴리카보네이트의 포토레지스트에 대한 식각 선택비는 펄스 파워가 증가함에 따라 같이 증가하는 것을 알 수 있었다. 5 sccm O2, 55 mTorr 공정 압력, 400 V 펄스 파워, 200 kHz 펄스 주파수의 조건에서 펄스 시간이 $0.5\;{\mu}s$ 에서 $1.0\;{\mu}s$ 로 증가할 때 PMMA와 폴리카보네이트의 식각률은 거의 변화가 없었다. 그러나 같은 조건에서 펄스 시간이 $1.0\;{\mu}s$ 에서 $2.0\;{\mu}s$ 로 증가한 경우에는 PMMA와 폴리카보네이트의 식각률은 선형적으로 증가하였다. 펄스 시간이 고분자 소재의 건식 식각에 영향을 줄 수 있다는 사실을 알 수 있었다. 주사현미경을 이용하여 식각된 표면 형상을 분석한 결과, 폴리카보네이트가 PMMA보다 표면이 매끈하게 관찰되었다. 요약하면, 펄스 DC $O_2$플라즈마는 PMMA와 폴리카보네이트 등의 고분자 소재의 건식 식각에 중요하게 활용될 수 있다는 사실을 본 연구를 통해 이해할 수 있다.
Proceedings of the Korean Vacuum Society Conference
/
2011.08a
/
pp.137-137
/
2011
펄스 직류 $BCl_3$ 플라즈마의 전기적 특성과 GaAs의 건식식각을 연구하였다. 공정변수는 펄스 직류 전압 (350~550 V), 펄스 직류 주파수 (100~250 kHz), 리버스 시간 (0.4~1.2 ${\mu}s$)이었다. 전기적 특성은 오실로스코프를 이용하여 분석하였다. 펄스 직류 전원의 경우 평균 전압이 일정하더라도 주파수가 커지거나 리버스 시간이 커지면 peak-to-peak 전압이 증가한다는 사실을 이해하였다. GaAs 식각 실험 후 샘플의 식각률, 식각 선택비, 표면 형상을 비교, 분석하였다. GaAs의 식각 결과는 식각 속도, 식각 선택비, 표면 형상, 잔류 물질 분석을 실시하엿다. 본 실험에서는 1대의 기계적 펌프만을 상ㅇ하여 진공 압력을 유지하였다. GaAs의 식각 속도는 10 sccm $BCl_3$를 사용한 경우 최대 0.4 ${\mu}m$까지 얻을 수 있었다. 감광제에 대한 최대 식각 선택비는 약 2.5 : 1이었다. BCl3 플라즈마의 경우 75 mTorr의 저진공 조건에서는 500 V, 250 kHz, 0.7 ${\mu}s$의 실험에서 가장 좋은 식각 특성을 얻을 수 있엇다. X-레이 광전 분석기 데이터에 의하면, 식각된 GaAs의 표면을 깨끗하였으며, 염소와 관련된 잔류 물질은 거의 발견되지 않았다.
Journal of the Institute of Electronics Engineers of Korea TC
/
v.39
no.3
/
pp.150-157
/
2002
A nonlinear shaping method for a wire antenna is presented to improve the limited pulse radiation ability due to the frequency characteristics with nulls which are found in the conventional straight or V antennas. The developed scheme is based on the minimization of frequency-dependence of the radiated electric field intensity over wide band, hence giving the ripple-type frequency characteristics. It is shown that the synthesized shape has more advantage in the case of shorter pulse. That is, we found that for shorter pulse exciting, the radiated peak value of the synthesized antenna is larger than that of the conventional linear antenna. The inverse discrete Fourier transform based on the moment method is used for the transient analysis of current distribution and far field electric field.
The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
/
v.14
no.2
/
pp.83-91
/
2003
광대역 스펙트럼을 갖는 신호의 송, 수신을 위한 안테나는 분산 및 단부(end points)에서의 전류 반사가 최소로 되어야 한다. 이를 위해 안테나 상에 저항을 적절히 분포시키는 방법을 소개하고, 그 방법을 사용한 대표적인 펄스 송, 수신안테나의 특성을 살펴보고자 한다. 그리고 비선형적으로 분포된 저항을 갖는 다이폴 안테나의 ps 전자기 펄스 송, 수신 특성을 펄스폭, 안테나 길이와 형상 등을 변수로 하여 시간영역 해석을 통해 엄격히 분석한다.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2009.05a
/
pp.136-137
/
2009
전자파 차폐재로 메쉬를 제작하는 기존의 배치 방식은 복잡한 작업공정과 비싼 설비로 인해 생산원가 높다. 그래서 pulse reverse current를 이용하여 Cu mesh 도금을 하였다. 정펄스의 전류밀도가 $31mA/cm^2$일일 때 역펄스의 전류밀도 및 duty cycle에 상관없이 표면은 매끄럽게 나왔다. 정펄스의 전류밀도가 $454mA/cm^2$일때는 duty cycle이 25%이하는 표면상태가 매끄럽게 나타났지만 33%이상에서 표면상태가 거칠게 도금이 되었다.
Journal of the Korea Academia-Industrial cooperation Society
/
v.14
no.12
/
pp.6114-6118
/
2013
This study examined the ultrasonic pulse reflection method(UPRM) for testing each ultrasonic pulse waveform model(UPWM) based on weld defects. The sharp crack of a clear signal was generated. The echo height of the defective probes changed according to the location. In a long crack in a circle around the defective probes, the Swivel scanning echo height when using the particle was reduced drastically. The peaks in the echo were thin because the needle was pointed. The porosity defects arising from a single echo was sharp and crisp, but a number of pores of the collective reflection overlapped and ajagged echo was observed. Slag, slag inclusions, cracks, and defects at the Swivel scan of each particle using the echo shape showed difference in the degree. Cracks were revealed as sudden changes in the echo height of the slag inclusions: increase ${\rightarrow}$ decrease ${\rightarrow}$ increase ${\rightarrow}$ decrease. In addition, the location of a number of defects in the dense pore geometry, such as a typical echo sundry, revealed the shape in the slag. Poor penetration of the defect echo, revealed the cracks to have a sharp-edged, crack-like shape with an echo.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.