• Journal of Sensor Science and Technology
• /
• v.6 no.5
• /
• pp.385-391
• /
• 1997

An objection of this study is to develop a measuring circuit of a gauge using radioisotope for compaction control. The gauge developed in this study makes use of radioisotope with the activity exempted from domestic atomic law and consists of measuring circuits for gamma-rays and thermal neutrons, a high voltage supply unit, and a microprocessor. To obtain meaningful numbers of pulse counts, parallel five and two circuits are provided for gamma-rays and thermal neutrons, respectively. Being simple in electrical characteristics of G-M detector for gamma-rays, pulses are counted through only a shaping circuit. Very small pulses generated from He- 3 proportional detector for thermal neutrons are amplified to the maximum of 50 [dB] and a window comparator accepts only pulses with meaning. To minimize effects of natural environmental radiation and electrical noise, circuits are electrostatically shielded and pulses made by ripples are eliminated by taking frequency of high voltage supplied to the circuit and pulse height of ripples into consideration. One-chip microprocessor is applied to process various counts, results are stored and the gauage is made capable to communicate with PC. Enough and meaningful numbers of pulses are counted with the prototype gauage for compaction control.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.8 s.111
• /
• pp.767-772
• /
• 2006

The receiver of this paper is Dual-band monopulse type for prototype of tracking radar. Localization of radar technology is an issue of SamsungThales and go into development. Dual-band radar in comparison with Single-band radar requires higher cost and power consumption but there are many advantages of dealing with jamming, detection range, image signal rejection, cloud-rain influence, clutter, resolution. The receiver is comprised of X-band RF head module, Ka-band RF head module and common IF module. Each signal of X-band and Ka-band is selected by the switch in If module. Phase shifter in IF module of local stage controls the phase of sum, azimuth, elevation channel. In the test result, gain is $40{\pm}3 dB$, isolation of transmitter/receiver is 39 dBc, dynamic range is 110 dB and noise figure of each channel is 4.5dB and 6.9dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11A
• /
• pp.1820-1826
• /
• 2001

In this paper, we present a modeling scheme for the already-installed two-wire home phone lines with arbitrary topologies and show that the inter-symbol interference due to the topology can be removed using an adaptive equalizer. The transmission characteristics of the arbitrary-configured two-wire home phone lines can be analyzed through the ABCD matrices. The simulation result shows that the impedance mismatch due to the branch lines renders nulls in the frequency response or delayed pulses in the impulse response. These nulls or delayed pulses cause inter-symbol interference that inhibits correct signal detection. An adaptive equalizer is shown to be effective in eliminating the interference. Also, the simulation result shows that the equalizer converges in 1.5 ms at a data rate of 1 Msps at signal-to-noise ratios greater than 15 dB. In addition, from the result of relation between E$\_$b//N$\_$and BER(Bit Error Rate), we can see that E$\_$b//N$\_$o/ more than 19 dB is required for the data communication with a BER less than 10$\^$-5/.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.9-15
• /
• 2015

A CMOS band-pass delta-sigma modulator(BPDSM) and cascode class-E power amplifier have been developed CMOS for Class-S power amplifier applications. The BPDSM is operating at 1-GHz sampling frequency, which converts a 250-MHz sinusoidal signal to a pulse-width modulated digital signal without the quantization noise. The BPDSM shows a 25-dB SQNR(Signal to Quantization Noise Ratio) and consumes a power of 24 mW at an 1.2-V supply voltage. The class-E power amplifier exhibits an 18.1 dBm of the maximum output power with a 25% drain efficiency at a 3.3-V supply voltage. The BPDSM and class-E PA were fabricated in the Dongbu's 110-nm CMOS process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.195.2-195.2
• /
• 2016

대기압 플라즈마는 공기중에서 방전이 가능하고, 이때 생성되는 활성산소종(ROS)과 활성질소종(RNS)을 적절히 이용하면 살균은 물론 제독이 가능하다. 특히 신경작용제나 수포작용제 등의 화학물질은 박테리아 포자, 세균, 바이러스 등의 생물작용제에 비해 더 많은 에너지와 시간이 요구된다. 현재 군이나 의료 시설에서는 과산화수소를 이용한 제독이나 염소계 표백제 성분으로 구성된 수용성 제독제를 이용하지만, 플라즈마의 경우는 단순히 기체를 방전하여 제독에 이용할 수 있으므로 보다 제독 시스템을 간단하게 구성할 수 있다. 하지만 대기압 방전시 방전전압을 낮추기 위해 헬륨과 알곤등의 기체를 공급하여 사용할 경우 부가적인 시스템의 규모가 커져 활용에 제한이 따른다. 따라서 본 연구에서는 대기중에 존재하는 질소, 산소 등을 이온화시키기 위해 10-25kHz의 주파수에서 4.5kV의 8us 펄스전원을 인가하여 공기 플라즈마를 얻고, 열에 의한 분해효과를 제거하기 위해 플라즈마의 기체온도를 20도로 유지시켰다. 플라즈마의 특성은 방출광 분석법을 이용하여 떨림온도를 계산하였고, 질소와 오존의 농도를 동시에 관찰하였다. 분해된 화학작용제는 기체분석기(Gas Chromatography)를 통해 표준 오염농도대비 잔류한 양을 측정함으로써 제독효율을 계산하였다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.1
• /
• pp.100-110
• /
• 1994

레이다 신호는 대표적인 전자파 신호로서 주변환경에 따라 시간, 주파수, 공간 영역에서 고유한 신호특성을 가지고 있으며, 신호처리 기법도 다양하다. 본 논문에서는 먼저 레이다를 위한 전파 신호처리 의정의와 필요성을 언급한뒤, 레이다 신호환경 특성을 살펴보고 신호처리를 위한 신호의 시간 및 스펙트럼 특성에 대해 기술하였다. 그리고, 신호특성에 적합한 신호처리기의 구현을 위해 레이다 신호처리에 관 련된 주요 기법에 대해 개괄적으로 설명하였다. 레이다 신호처리 분야는 일반적으로 잘 알려진 음성이 나 영상신호처리 분야와 달리 고유한 알고리듬과 구조가 요구된다. 신호처리기법으로서 레이다 파형설 계, 해상도 모호성, 펄스압축, 클러터제거, 도플러처리, 일정오경보탐지, 클러터 지도, 표적군 형성/ 추출, 표적식별, 레이다영상기법, 적응배열처리 등에 관해 개괄적으로 설명하였다. 레이다 선호처리 기술은 "스마트"한 레이다를 위한 두뇌 역할을 하기때문에 그 필요성과 중요성이 증가하고 있다. 그러나, 고속, 대용량의 신호를 주어진 빔 주사시간동안에 실시간으로 처리하여 표적 정보를 추출해야 하기 때문에 아직도 상용 프로세서의 속도 한계내에서 알고리듬의 수행에 다소 제약을 받고 있으나, 최근 디지탈 신호처리 전용의 고속 칩의 출현으로 많은 발전을 가져오고 있다. 끝으로, 향후 레이다 신호처리 발전 추세와 응용분야에 대해 살펴보았다. 응용분야는 군수 및 민수용의 겸용 파급효과가 매우 크고, 군용의 대공탐색 및 조기경보, 전장감시뿐만 아니라 전투기 탑재용으로 필수적이며, 특히 민수용의 공 항, 항공기, 선박, 위성 등 매우 다양하다. 최근 발전추세에 따른 기술로서 다중모드 신호처리, 고집적 회로기술, 적응배열, 디지탈 빔형성, 적응성, 고분해능 및 방향성, 표적식별, 다차원 신호처리에 대해 언급 하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.4
• /
• pp.627-634
• /
• 1998

This paper proposes an algorithm which improves capacity of a state observer and low speed driving characteristics of a induction motor by inertia moment identification. In induction motet driving systems, it is difficult to obtain the accurate speed information by a low resolution encoder because the encoder pulses are very few in a low speed range. To improve this problem, state observer based on the Gopinath' theory which estimates speed and disturbance was designed, and disturbance rejection control was realized by application of the observer. Also, inertia moment of the motor was estimated and the nominal inertia of the observer was identified to minimize the error of estimated speed and disturbance. From the simulation and experimental results, it is showed that the proposed observer improved the transient response characteristics in low speed region below 6［rpm］.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.6
• /
• pp.861-867
• /
• 2011

Wastewater from crude oil reserve base usually contains large amount of non-biodegradable contaminants. The conventional wastewater treatment progress can hardly meet the regulation of wastewater effluent quality. This study investigated the removal of non-biodegradable organic contaminants in wastewater from crude oil reserve base using a pulse UV treatment. The modified process incorporating pulse UV process was set up to treat the wastewater from crude oil reserve base. The treatment process is composed with coagulation and flocculation, micro-bubble flotation, sand filter, pulse UV system, and GAC filter. The results show CODMn was effectively removed by the process with pulse UV system and it can meet the wastewater effluent regulation. The single effect of pulse UV process in CODMn removal was not significant(9~15% based on sand filtered effluent), however with the subsequent activated carbon filter the removal ratio CODMn was increased up to 28% compared to the process without pulse UV syetem.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.331-341
• /
• 1999

We analyzed theoretically the removal efficiency and the particle growth inside the pulse corona discharge reactor to remove $NO_x$ and investigated the effects of process variables such as the NO and $NH_3$ input concentrations. Most of NO is converted into $NO_2$ and $HNO_3$ and the $HNO_3$ reacts with $NH_3$ to form the $NH_4NO_3$ particles. About 6.4% of NO is converted into $HNO_2$ which form the $NH_4NO_2$ particles by reaction with $NH_3$. Some of $NO_2$ follows the reaction pathway to form $NO_3$ and $N_2O_5$. The amount of particles formed inside the reactor is basically determined by the input $NH_3$ concentration. The ratio of NO to $NH_3$ affects the reactor length for particle formation significantly. The higher the input concentrations of NO and $NH_3$ are, the faster the particles grow.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.12 s.354
• /
• pp.16-23
• /
• 2006

This paper presents the development of the fast Direction Finder using direct conversion method, which can intercept for short pulse signal of less' than 1 msec. in RF Down Converter, and CVDF(Correlative Vector Direction Finding) algorithm, which estimates DoA (Direction of Arrival). The configuration and characteristics of direction finder using 5-channel equi-spaced circular array antenna are presented and the direct conversion techniques for removing tuning time using I/Q demodulator are described. The CRLB of our model is derived, the principles of 2 kind of CVDF algorithm are explained and their characteristics are compared with CRLB w.r.t the number of samples and spacing ratio. The RF Down Converter prototype using direct conversion method is manufactured, the 2 kind of CVDF algorithm are applied and their performance are analyzed. Finally it is confirmed the LSE based CVDF algorithm is better than correlation-coefficient based except for ambiguity protection capabilities.