• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.4
• /
• pp.368-373
• /
• 2021

This paper presents a method of independent pulse repetition frequency(PRF) generation and control for frequency phase calibration on mono-pulse radar at a remote location. In order to generate an independent PRF signal of 320[Hz], pulse width modulation(PWM) of 16-bit timer/counter was applied. For a precision control of PRF signal, 16-bit timer/counter interrupt was changed for each period. Therefore, average frequency of PRF could be controlled by 0.0001[Hz]. To calibrate a frequency phase of mono-pulse radar at a remote location, the proposed PRF generator with a precision control of frequency was used regardless of receiving PRF signal from a radar. For the verification of the proposed PRF generator, theoretical analysis and experimental results are included.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.9
• /
• pp.129-134
• /
• 2016

This paper studies the high frequency PWM (pulse width modulation) driving technique to increase an optical efficiency and to prevent an optical color quenching of blue laser for head up display on vehicles using digital micro mirror device (DMD) panel and yellow phosphor wheel. The proposed approach adaptively drives the current pulse width modulated signals of high optical power of blue laser to increase the lifetime and to decrease the stem temperature of laser. This method stabilizes the temperature of laser according to the driving environment and the forward current capacity. By the proposed method, the brightness of blue laser is improved by about 37% compared to the continuous waveform current driving method.

• Journal of the Korean Society of Radiology
• /
• v.11 no.3
• /
• pp.101-108
• /
• 2017

DC/DC switching power converters are commonly used to generate a regulated DC output voltage with high efficiency. The advanced DC/DC converter uses a PWM-IC with OP-Amp. (Operational Amplifier) to control a MOSFET (metal-oxide semiconductor field effect transistor), which is a switching component, efficiently. In this paper, it is shown that the electrical characteristics of OP-Amp. are affected by radiations of ${\gamma}$ rays using $^{60}Co$ for TID (Total Ionizing Dose) testing and 5 heavy ions for SEL (Single Event Latch-up) testing. TID testing on OP-Amp. is accomplished up to the total dose of 30 krad, and the cross section($cm^2$) versus LET($MeV/mg/cm^2$) in the OP-Amp. operation is evaluated SEL testing after implementation of the controller board.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.1
• /
• pp.52-60
• /
• 2005

Generally, a voltage difference or voltage distortion exists between the reference voltage and the practical voltage applied to a motor in a pulse width modulated(PWM) voltage source inverter(VSI). This voltage distortion varies with the operating conditions such as the temperature, DC link voltage, and phase current level. Also the voltage distortion affects the machine current distortion, torque pulsations, and control performance. In this paper, the voltage distortion in a PWM VSI is analyzed and a new on-line estimation method based on the model reference adaptive system(MRAS) is proposed to compensate the time varying voltage distortion, while considering the parameter variations for a permanent magnet synchronous motor (PMSM). The simulation and experimental results show the effectiveness of the proposed voltage difference observer and the compensation method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.1
• /
• pp.65-73
• /
• 2002

This paper proposes a new carrier-based PWM method to solve the most serious problem of flying capacitor multi-level inverter that is the unbalance of capacitor voltages. The voltage unbalance occurs due to the difference of each capacitor's charging and discharging time applied to Flying Capacitor Inverter. New solution controls the variation of capacitor voltages into the mean '0'during some period by means of new carriers using the leg voltage redundancy in the flying capacitor inverter. The solution can be easily expanded to the multi-level inverter. The leg voltage redundancy in the new method makes the switching loss of device equals to the conduction loss of device. This paper will examine the unbalance of capacitor voltage and the conventional theory of self-balance using Phase-shifted carrier. And then the new method that is suitable to the flying capacitor inverter will be explained.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.131-132
• /
• 2016

3-레벨 중성점 다이오드 클램프(NPC) 컨버터는 high-power medium voltage(MV)에서 많이 응용된다. 하지만 3-레벨 중성점 다이오드 클램프(NPC) 컨버터는 각 스위치 소자에서 손실이 불균형하게 발생하게 되어 스위치 소자 간 성능이 불균형하게 된다. 따라서 본 논문에서는 단상 3-레벨 중성점 다이오드 클램프(NPC) 컨버터의 기존 모델 예측 제어의 스위칭 패턴을 분석 및 스위칭 순환방식을 이용한 효율적인 스위칭 상태를 갖는 모델 예측 제어를 제안한다. 이를 통해 PI 제어기 기반의 펄스 폭 변조 방법과 기존 모델 예측 제어 방법의 손실 비교를 통하여 제안하는 모델 예측 제어 성능을 검증한다.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.367-369
• /
• 2008

본 논문은 중용량에 적합한 새로운 이중출력 LLC 공진형 DC/DC 컨버터에 관한 것으로써, 별도의 Post-regulator및 추가되는 제어 IC 없이 정밀한 이중출력이 가능한 새로운 방식의 컨버터를 제안한다. 제안된 컨버터의 제어방식은 펄스폭 변조(PWM)와 동시에 주파수 변조(PFM)를 통해 이루어지며 Master 와 Slave 출력을 각각 주파수, 듀티로 제어함으로써 Slave 출력을 위한 별도의 Post-Regulator 및 제어 IC가 필요 없기 때문에, 저가의 컨버터 구현이 가능하다. 또한 기존 LLC 공진형 DC/DC 컨버터와 같이 스위칭 소자의 영전압 스위칭이 보장되는 동시에, Post-Regulator 로 인한 손실이 없기 때문에 효율 및 발열 특성이 매우 우수하다. 본 논문에서는 제안된 컨버터의 우수성과 신뢰성 검증을 위해, 실제로 50" FHD급 PDP용 전원회로를 위한 시작품을 제작하고 이를 이용한 실험결과를 바탕으로 제안된 컨버터의 타당성을 검증한다.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.227-233
• /
• 2010

This paper treats the method to build up Motor drive-circuit using semi-conduct control part like power transistor, MOSEFT and refers to the operation theory, forward, reverse rotation control and speed control method which is changed by PWM. And also, this paper mention to the basic principle of DC Motor and various Motor control method using micro-processor.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.4
• /
• pp.197-204
• /
• 1997

최근 유도전동기를 이용한 가변속 구동시스템의 수요가 자동화 및 에너지의 효율적 이용 측면에서 육상 산업체는 물론, 선박 및 해양플랜트에도 확산되고 있다. 유도전동기의 토크 고속제어법은 가변속 구동시스템의 고성능화를 위한 필수과제로서, 제어법 적용시 2차저항의 동정문제가 대단히 중요하다. 본 논문에서는 유도전동기의 토크 고속 응답제어계에 있어서 고정도의 토크응답을 실현하기 위한 2차저항 동정법을 제안한다. 제안된 방법은 모터의 회로방정식으로부터 유도되며, 모터의 인가전압과 1차전류 정보로부터 간단히 구현된다. 제안된 방안의 타당성을 검증하기 위하여 펄스폭변조방식의 전압형 인버터를 상정한 수치 시뮬레이션을 수행하며 그 결과를 통하여 제안방식의 유용성을 입증한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.6
• /
• pp.1374-1381
• /
• 1994

This study suggests a new type shaft generating system driven by hydrostatic transmission suitable for small size vessels. In this system, the hydraulic motor speed is controlled by displacement adjustment using a 3-way high speed on/off valve. The 3-way high speed valve is operated by PWM control signal. In this study, a digital robust servo control algorithm is applied to the controller design of the system. By experiments and numerical computations, the frequency variation characteristics of the generating system under various disturbances are investigated. Conclusively, it is said that the shaft generating system proposed in this study shows excellent control performances.