• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.3
• /
• pp.15-21
• /
• 2003

This experimental study describes the propagation characteristics of the impulse noise emitted from the exit of a perforated pipe attached to the open end of a simple shock tube facility. The pressure amplitudes and directivities of the impulse wave propagating outside from the exit of pipe with several different configurations are measured and analyzed for the range of the incident weak shock wave Mach number between 1.02 and 1.2. In the experiments. the impulse waves are visualized by a Schlieren optical system for the purpose of understanding their propagation characteristics. The results obtained show that for the near sound field the impulse noise strongly propagates toward the pipe axis, but for the far sound field the impulse noise uniformly propagates toward the omnidirections, indicating that the directivity pattern is almost same regardless of the pipe type. For this non-directivity in the far sound field, it is shown that the perforated pipe has little performance to suppress the impulse noise.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.244-245
• /
• 2002

1 picosecond 보다 짧은 펄스길이를 갖는 초단파길이 레이저 펄스 (Ultrashort laser pulse, USLP)를 이용한 물질의 절제 (ablation)는 여타 nanosecond 영역의 레이저 절제와 많은 차이를 보인다(1). USLP는 순간 파워가 매우 높기 때문에 직접적으로 물질의 원자를 분리시켜 자유전자를 형성한다 이들 자유전자는 일반 선형흡수체 (linear absorbing chromophore)보다 흡수계수가 몇 십 배로 높아 대부분의 펄스 에너지가 표면 100-200 m 이내의 극히 작은 지역에 밀집되게 된다. (중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.117-117
• /
• 2013

레이저 레이더용 시력안전파장대 고출력 광펄스 생성을 위한 광원으로 MOPA 구도로 광섬유 레이저를 제작 하였다. MOPA 기반 펄스 광섬유 레이저는시력 안정 파장대인 1,550 nm 대역 파장을 갖고 펄스폭이 2 ns 이하이며 반복률이 30~240 kHz 가변 가능하다. 광섬유 증폭단에서 1단 증폭기는 저잡음용 코어 펌핑 방식의 증폭기로 구현하였으며, 2단 증폭기는 중출력 증폭기로 코어 펌핑구조에 후방향 펌핑 구도로 설계하였다. 3단 증폭기는 최종목표인 2ns 이하의 펄스 폭 및 25 kWp 이상의 첨두출력을 달성하기 위하여 클래딩 펌핑 방식의 고출력 광증폭기로 구현하였다.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1785-1787
• /
• 2002

폐수에서 발생하는 슬러지(Sluge)의 효과적인 처리를 위한 전기적 충격파를 발생시키는 장치로 고전압 펄스 전원 시스템을 제작하였다. 제작한 고전압 펄스 전원 시스템의 제원은 최대 출력 전압 60 kV, 최대 반복 주파수 500 Hz 이며, 한 펄스 당 최대 출력 에너지는 20 J 이다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.324-326
• /
• 2004

We have obtained ultra-short pulses with a wavelength of 616 nm from a Distributed Feedback Dye Laser pumped by excimer laser. Using the second harmonic generation, we obtained ultra-short pulse at 308nm in ultraviolet region and also performed amplification in 3 stages of XeCl amplifiers.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.353-357
• /
• 2007

We have been setting up experiments on propagation of shock waves generated by the pulsed laser ablation. One side of a thin metal foil is subjected to laser ablation as a shock wave propagates through the foil. The shock wave, which penetrates through the foil is reflected by an acoustic impedance which causes the metal foil to high-strain rate deform. This short time physics is captured on an ICCD camera. The focus of our research is applying shock wave and deformation of the thin foil from the ablation to accelerating micro-particles to a very high speed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.2
• /
• pp.145-151
• /
• 2012

Evaluation of the heart work is starting to emerge as a new diagnostic tool for arterial diseases. The aim of this study is to develop a mathematical model for the estimation of heart work utilizing the pulse waves between two points of a vessel. In order to calculate heart work, medical data such as blood pressure waveforms (which are measured using a cuff) are utilized. The heart work is calculated by employing the modified Windkessel model together with the viscosity models of Casson or Herschel-Bulkely (H-B). The results indicate that the compliance values at the proximal and distal locations differ for the Casson and H-B models.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.562-567
• /
• 2000

The Impingement of a weak shock wave discharged from the open end of a shock tube upon a flat plate was investigated using shock tube experiments and numerical simulations. Harten-Yee Total Variation Diminishing method was used to solve axisymmetric, unsteady, compressible flow governing equations. Experiments were carried out to validate the present computations. The effects of the flat plate and baffle plate sizes on the impinging flow field over the flat plate were investigated. Shock Mach number was vaned in the range from 1.05 to 1.20. The distance between the plate and shock tube was changed to investigate the effect on the peak pressure. From both the results of experiments and computations we obtained a good empirical equation to predict the peak pressure on the flat plate.

• Korean Journal of Optics and Photonics
• /
• v.10 no.3
• /
• pp.243-247
• /
• 1999

We report the generation of inherently stable, high-speed, nearly transform-limited, optical pulses by chirped pulse compression, in which sinusoidally driven phase modulator generates frequency chirped pulses that are subsequently compressed by a dispersive optical fiber. Experimental results show that $sech^2$ shape pulses with a pulse width of ~14 ps and a time bandwidth product of ~0.34 are successfully generated at 10 GHz repetition rate. In contrast to other methods, such as higher order soliton compression, this approach does not depend on the optical power and thus shows promise for application to low-power lasers.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1208-1209
• /
• 2015

포항가속기 연구소에서 4세대 10 GeV 전자를 가속시키기 위하여 대전력 펄스 RF 51sets가 요구된다. 대전력 RF 펄스 공급원으로 200MW 펄스 모듈레이터를 사용하고 있으며 모듈레이터에 공급하는 고전압 전원을 인버터 전원공급장치를 사용한다. 인버터 전원공급장치의 입력 전원은 3상 480 Vac을 사용하고 있으며 운전시 고전압 전원공급장치에서 많은 고조파가 발생한다. 따라서 본 논문에서는 고조파 성분을 측정 분석하고 고조파 성분을 저감하기 위한 대책 방안을 강구하고자 한다.