• Proceedings of the Korean Society of Computer Information Conference
• /
• 2012.07a
• /
• pp.229-231
• /
• 2012

본 논문에서는 펄스옥시미터 시스템의 측정 신뢰성 향상을 위해 Perfusion Index값을 이용한 광량조절의 방법을 제시한다. 본 방법은 펄스옥시미터의 광출력 값의 조정을 미약한 신호 상황에 대한 적응 가능한 광출력을 줄 수 있으며, 산소포화도 측정값의 변화율에 직접적으로 영향을 주는 광량을 보다 정확하게 조절하여 안정적인 측정이 가능하다. 또한 미약한 신호의 측정을 일괄적으로 조절 가능한 기능을 통해 다양한 사람들에게 사용되는 펄스옥시미터의 특성상 보다 정확한 값을 제공할 수 있다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.4
• /
• pp.813-820
• /
• 2009

This paper describes the realization of ubiquitous healthcare monitoring system using wearable pulse oximeter based on a wireless sensor network. In order to obtain information of oxygen saturation from a patient, a small size and low power consumption wearable pulse oximeter was designed. Information of oxygen saturation collected by wireless sensor node was transmitted wirelessly to a base-station for storage and display purposes via wireless sensor network. Wireless sensor nodes were programmed by TinyOS application to perform data acquisition and transmission. Lab VIEW server program was designed to monitor information of oxygen saturation and process the measured PPG (photo plethysmogram) signals to APG(Accelerated plethysmogram) signals by appling second order derivatives. PPG signals are simple and cost effective technique to measure blood volume change.

• Korean Journal of Optics and Photonics
• /
• v.11 no.6
• /
• pp.452-456
• /
• 2000

A measurement unit and signal processing algorithm have been developed for predicting arterial oxygen saturation noninvasively. The measurement set-up was composed of a probe including light source and photodetector, optical signal processing section, LED driving circuit, PC interface software for data acquisition and data processing software. Light from the LED's was irradiated onto the finger nail bed and transmitted light was measured at different wavelengths. An effective baseline correction method was developed and measured data were analyzed by using various data processing methods and prediction algOlithms. For performance evaluation, a pulse oximeter simulator (Bio- Tek Instrument Inc.) was used as reference. The best performance in terms of the correlation coefficient and the standard deviation was obtained under the following conditions; when the arterial signals were computed in terms of area rather than peak-valley difference, and when the algorithm calculating by $In(I_p/I_v)/I_{avr}$ value for pulsation waveform was used. In in vivo test, prediction was improved when the developed baseline correction method was used. In addition, wavelengths of 660 nm and 940 nm provided better linearity and precision than wavelengths of 660 nm and 805 nm. 05 nm.

• Journal of Industrial Technology
• /
• v.26 no.A
• /
• pp.89-93
• /
• 2006

Pulse oximetry, which monitors non-invasively the oxygen saturation in blood, is influenced by patient's respiration, movement or a factor of an environment. Specially, it's difficult to measure a PPG (Photoplethsmography) signal from the moving patient because of the motion artifact. Accordingly, it is required to extract the pure PPG signal from the PPG signal to measure oxygen saturation. In this paper, we propose an adaptive noise canceller to improve the performance of motion artifact removal. Then we design a hardware system for real time monitoring of the oxygen saturation. The proposed algorithm estimates the slope of transition rate between two different wavelength signals.

• Proceedings of the KOSOMBE Conference
• /
• v.1993 no.05
• /
• pp.116-119
• /
• 1993

In this paper, we implemented a pulse wave type oximeter system that continuously measure the of oxyhemoglobin saturation of the arterial blood(SaO2) and pulse rate with non-invasively. We use the transmission type and reflection type transducer for comparison the percentage of hemoglobin oxgen saturation. The light Iron the two kind of LEDs is transmitted through the tissue, then received by a single photodiode with alternatively. By the phase sensitive detection circuit, the output of the photodiode is separated in to red and near infrared signal. We calculated a ratio of light transmittance between two kind of LEDs, and then, it is applied to the oxgen saturation coefficent calculation formular.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.300-302
• /
• 2021

Usage of a face mask has become mandatory in many countries after the COVID-19. This paper described to develop a IoT based smart mask system for monitoring face mask. The system developed in this paper has two main units, a sensor module, and a smartphone application. The sensor module consists of four components: temperature and humidity sensor, a heart rate sensor, and a BLE chip. This components work as a unit to collect data and stream them through an I2C port over BLE to a connected mobile device. The smartphone application is an Android application developed for smart phones. It enables the Android device to communicate with the sensor to receive sensor data, process, store and display results.

• The Journal of the Korea Contents Association
• /
• v.18 no.4
• /
• pp.114-127
• /
• 2018

This study aimed to investigate the levels of Obstructive Sleep Apnea (OSA), health behavior and sleep quality and to examine the predictors of OSA in patients with ischemic cardio-cerebrovascular disease. 141 patients who were admitted to the vascular unit were recruited and surveyed using structured questionnaires. Saturation of Peripheral Oxygen (SpO2) was measured at three time points using a pulse oximeter. Data were analyzed using SPSS/WIN 20.0. The mean age of the subjects was $64.4{\pm}11.1$ years and 61% was men. The 21.3%(n=30) of the subjects were classified as high-risk for OSA by the cut point and 71.6%(n=101) had low sleep quality. OSA high-risk group showed significant difference in SpO2 in the middle of sleep (p=.006) and at the end of sleep (p=.004) compared to the low-risk group. Multiple logistic regression analysis showed that perceived frequent snoring, smoking, obesity, lack of exercise among health behavior were found as predicting factors on OSA. OSA or persistent snoring should be recognized as a cardiovascular risk factor in the cardiovascular nursing practice. In addition to early treatment of OSA, education and counseling should be provided to patients and their family for prevention of secondary recurrence.