• Journal of the Korean Institute of Intelligent Systems
• /
• v.5 no.3
• /
• pp.64-72
• /
• 1995

This paper proposes how to tune the gains of PI controllers in case of gain change in a process control system. Controllers of PI type have been used in industry and the gains of the controllers have been tuned by expert engineers. It, therefore, takes much time and efforts to tune the controllers. It is more difficult to find gains of multi-loop processes. The tuning method of a fuzzy tuner in this paper is developed based on the assumptions that the PI controllers are of analog type and are tuned off-line, and that the characteristic values must be supplied for the tuner. A Tuner using Fuzzy Logic(FLT1 is capable of showing presentlpast states of a process control system and finding gains of PI controllers. The verfication of the FLT is shown by various experiments.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.6
• /
• pp.534-542
• /
• 2005

This paper proposes the fuzzy logic based vector control method for a Surface Mounted Permanent Magnet Synchronous Motor(SMPMSM) used in the elevators. The gain of a conventional PI speed controller in the elevator drive system can not be usually set high due to mechanical resonances, therefore its performance becomes deteriorated. There have been many methods to solve above problems such as an acceleration feedback in the speed controller. However, the above methods have defects that parameter information is demanded. In this paper', a Fuzzy controller(FC) is adopted in the elevator drive system. The performance of a fuzzy controller is compared with a PI controller in the no load and load conditions by simulation and experiments.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.4
• /
• pp.352-357
• /
• 2000

The vector control scheme is usually applied to the high performance induction motor drives. The PI controller is adopted traditionally to control the motor speed and currents in the vector control scheme. In this case, the dynamic performance of the induction motor is dependent on the PI gains and the gain optimization is necessary in order to get a good dynamic performance. But, it is very hard to optimize the PI gains uniquely within the speed control range because the equivalent model of the motor control system should be known exactly. In this paper, we propose the hybrid control scheme to remove the defects of PI controller. The hybrid control scheme includes the simplified fuzzy controller which operates in the transient state and the PI controller which operates in the steady state. The proposed scheme is applied to the vector control for induction motor, and the digital simulation and the experimental results are given to verify the proposed scheme.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.26-27
• /
• 2013

본 논문에서는 3상 Z-소스 PWM 정류기의 DC-link단 과도응답 특성을 개선하기 위해 PI제어기를 사용한 대신에 제어 대상에 대한 정확한 수식이 없이도 제어기 설계가 가능한 퍼지 PI제어기를 이용하였다. 제안한 퍼지 PI-제어기 기반의 PWM 정류기는 교류측 전압과 전류 센서 없이 DC-link단 전압과 전류 센서만을 이용하여 교류측 전압과 전류를 추정하였으며, 이를 PSIM 시뮬레이션을 통하여 검증 하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.4
• /
• pp.435-440
• /
• 2000

The speed control system of diesel engine is considerably nonlinear. Therefore, a countermeasure such as gain scheduling used to be incorporated to compensate this nonlinearity. On the other hand, it is said that fuzzy control is very robust against nonlinearity. But it is difficult to get a satisfactory response with only fuzzy control in real system. In this paper authors design a fuzzy-PI controller for the speed control of Medium diesel engine and carry out experiments with dedicate system implemented by Intel 80916KC to real diesel engine, Deawoo MAN 6Cyl., 1800rpm driving 3$\psi$220V, 150KW generator. We confirm the effectiveness of proposed control system.

• 전기의세계
• /
• v.45 no.7
• /
• pp.25-38
• /
• 1996

본 고에서는 PI구조를 가지면서도 기존의 PI제어기로써는 향상 시킬 수 없는 부분, 즉, 샘플링 타임의 변화, 부하외란의 변화, 그리고 파라미터의 변화를 고려하여 기존의 PI제어기에 대한 하나의 대안을 논하고자 한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.10
• /
• pp.100-106
• /
• 2006

This paper proposes a full fuzzy-logic-based vector control for a permanent-magnet synchronous motor (PMSM). The high-performance of the proposed fuzzy logic control (FLC)-based PMSM drive are investigated and compared with the conventional proportional-integral (PI) controller at different conditions, such as step change in command speed and load and etc. In the experimental and simulation the FLC is employed in the speed and current controller. The experimental results show to be a suitable replacement of the conventional PI controller for the high-performance drive system.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1995.10b
• /
• pp.174-179
• /
• 1995

본 논문데서는 부하외란이나 시스템 내부 파라미터의 변동시에 적응력이 저하되는 종래의 PI제어기와, 정상상태 잔류편차가 존재하는 퍼지 제어기의 단점을 극복하기 위한 적 응 퍼지 제어 기법을 제안하였고, 이를 도립 진자 시스템에 적용하였다. 운송차의 위치 및 진자 각도의 오차, 오차의 변화량에 따라 퍼지 추론을 행하여 PI 제어기의 가중치를 결정하 는 구조로, P제어기는 운송차 및 진자의 오차가 과도 상태에서의 영역에서 사용되어 속응성 과 고정도의 특성을 얻는다. 1제어기는 정상상태에서의 정도 향상에 이용되었다. 특히, 제안 하는 적응 퍼지 제어기는 운송차의 위치 오차에 대한 PI 동작과, 진자의 각도 오차에 대한 PI 동작을 각각 퍼지 추론에 의해 부드럽게 전환함으로서 고유 불안정의 시스템인 도립 진 자 시스템의 안정화 제어에 적용하였다.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.8 no.1
• /
• pp.46-52
• /
• 1994

In this paper, we implemented the variable speed controller of an induction motor by the Fuzzy control algorithms, which recently is invoking the remarkable interest. As the fuzzy controller is designed on the base of expert's knowlede and experience, it is difficult to expect the perfect control performance of fuzzy controller. Therefore, the adjustment techniques for optimization of scale factors were presented to design the robust fuzzy controller comparing with conventional PI control the usefullness of proposed fuzzy controller was showed by the experimental results.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.491-492
• /
• 2013

본 연구는 STATCOM을 이용하여 고속철도 급전 계통의 전압 변화를 보상하는 기법에 관한 것이다. 기존의 PI 제어기를 이용한 제어기법를 대신하여 본 연구에서는 퍼지제어기(FLC) 적용을 제안하며, 퍼지제어기와 PI제어기의 제어결과를 비교한다. 퍼지제어기를 통해 내부 파라미터 변동이나 외부의 환경 변화 등 계통의 변화시에 정상상태 편차, 정상상태 도달 시간 등을 최소화 시킬 수 있음을 보인다.