• Journal of Bio-Environment Control
• /
• v.1 no.2
• /
• pp.187-191
• /
• 1992

온도의 계측에는 열팽창(Thermal expansion), 열전기(thermoelectricity), 전기저항(resistance)등의 원리를 이용하고 있다. (1) 열팽창식 온도계 물체의 열팽창 원리를 이용하는 온도계에는 두 금속의 열팽창 계수의 차이를 이용하는 바이멜탈 온도계, 액체의 팽창을 이용하는 유리 온도계, 기체 압력이 온도에 비례하는 것을 이용하는 압력식 온도계 등이 있으나, 이중에서 유리 온도계가 가장 널리 사용되고 있다.(중략)

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.3 no.1
• /
• pp.9-14
• /
• 2011

The expansion work that is wasted through the irreversible expansion through the PC valve of decompression process of the natural gas governor station can be recovered by replacing the process by an isentropic expansion. The energy and exergy analyses for the two decompression process models of power producing and current decompression process model are presented. Analysis results showed that the exergy by gas supply is 56.29%, the exergy by producing power is 32.12 % in case of preheating system and 22.52% in case of non-preheating system. The dead exergy at the PCV is generated much more network. As these results, the usefulness of exergy analysis is verified.

• Journal of Energy Engineering
• /
• v.21 no.4
• /
• pp.411-418
• /
• 2012

The effect of built-in volume ratio of expander on the performance of a two-loop Rankine cycle system for engine waste heat recovery of vehicle has been investigated. In the case of positive displacement expander in the various operating condition of the vehicle, it can operate in both under-expansion and over-expansion conditions. Therefore, the analysis of off-design performance for the expander is very important. Furthermore, the volume and weight of the expander as well as the efficiency must be considered in the optimization of the expander. This study shows that the built-in volume ratio of expander causing under-expansion at a target condition is more desirable considering the off-design performance and size of the expander, based on the simple modeling of off-design operation of the expander.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.4
• /
• pp.392-398
• /
• 2009

Theoretical thrust equations for the diverse nozzle expansion condition were derived. By using the obtained thrust equations, parametric studies were carried out to estimate the effect of pressure exponent, minimum operation pressure, ambient pressure and extinguishment pressure on thrust modulation performance in pintle-nozzle solid rocket motors. Analysis results showed that thrust turndown ratio can be easily attained by small nozzle-throat area variation at high pressure exponent, low minimum operation pressure, high ambient pressure and high extinguishment pressure condition. At those conditions, the highest chamber pressure to obtain the intended thrust turndown ratio can be minimized.

• Journal of Energy Engineering
• /
• v.26 no.1
• /
• pp.23-27
• /
• 2017

An expander of an organic Rankine cycle is an essential component that significantly influences its entire performance and cycle efficiency. The inlet pressure and temperature of the expander used for the organic Rankine cycle are limited by the expander's mechanical properties and the characteristics of the working fluid. The organic Rankine cycle's output, heat absorption, and efficiency are altered by the inlet pressure and temperature of the expander. In this study, a theoretical comparative analysis was conducted on an organic Rankine cycle's performance changes, which are dependent on the inlet condition of the expander. The working fluid is an R134a refrigerant, and the expander is a positive-displacement type.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1100-1102
• /
• 2004

열팽창 방식의 가스차단기는 아크 에너지 자체를 이용하여 압력상승을 얻고, 상승된 압력을 이용하여 전류 영점 부근에서 아크 방향으로의 유동을 형성하여 아크를 소호한다. 대전류 구간에서 노즐 폐색현상이 일어나면 노즐 용삭이 크게 일어나며 용삭된 노즐 물질은 팽창실의 압력과 온도를 상승시키게 된다. 따라서 차단 특성해석을 위해서는 노즐 용삭에 의한 압력 상승해석이 필요하다. 본 논문에서는 아크에너지에 따른 노즐 용삭비를 이용하여 용삭되는 노즐량을 계산하고, 이로 인한 back flow현상을 고려한 해석 방법을 제안한다. 개발된 프로그램을 제작한 차단부 모델에 적용한 결과, 열팽창실의 압력상승치는 시험결과와 잘 일치함을 확인하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.11
• /
• pp.849-859
• /
• 2020

The semi-empirical equation and commercial computational tool were used to predict the base drag of a guided missile with free-stream Mach numbers and chamber pressures, and the results were generally agree each other. Differences in flow characteristics and base drags were observed with over/under expansion conditions by the nozzle. Under the over-expansion condition, the base pressure decreased as the expansion fan was generated at upper region of the base, and base pressure decreased further with increasing free-stream Mach number as the expansion becomes strong. Under the under-expansion conditions, a shock wave was generated around the base by the influence of the nozzle flow, which increased the base pressure, and the effect increased as the chamber pressure increased. Under the same chamber pressure condition, as the free-stream Mach number increases, the characteristic that the base pressure decreases as the shock wave generated at the base moves downstream was observed.

• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.690-700
• /
• 2000

In this study, an elastomer-assistered compression molding process was investigated by experiments as well as modeling for the long-fiber reinforced thermoset composites. The consolidation pressure generated by fixed-volume and variable-volume conditions was thermodynamically derived for both elastomer and curing prepregs, and was compared with the pressure measured during curing of epoxy matrix. Exhibiting non-linear viscoelastic characteristics in the compressive stress-strain tests, the measured stress was well compared with a modifed KWW (Kohlrausch-Williame-Watts) equation, which is based on the Maxwell viscoelastic model. Using the developed model equations, the consolidation pressure generated by the elastomer was successfully predicted for the compression molding process of thermoset composite materials in tile closed mold system.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.253-256
• /
• 2009

In the present paper, experimental and numerical fundamental analyses of the occurrence of lateral force in overexpanded thrust nozzle were carried out. Investigation of the lateral force fluctuations in an thrust nozzle for the shutdown transient was presented. Wall pressure distribution and Schlieren Photographs as NPR were presented. Pressure peak is observed during transition of RSS to FSS.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.11a
• /
• pp.37-37
• /
• 2000

일반적으로 노즐 입구의 압력과 배압의 비가 어떤 임계값보다 큰 경우에 축소확대 노즐을 통하는 유동은 노즐목에서 초크하며, 노즐출구에서는 용이하게 초음속으로 된다. 노즐을 통하여 초음속으로 방출되는 제트유동에 관해서는 현재까지 많은 연구가 수행되었다. 이들 연구에 의하면 노즐 압력 비에 따라 노즐출구에서의 유동상태(즉 과팽창, 적정팽창, 부족팽창상태)가 결정되며, 노즐출구로부터 하류의 초음속 제트유동에서 발생하는 충격파 구조 및 위치, 제트경계의 구조 그리고 제트의 코어 등 유동의 기구가 비교적 상세하게 알려져 있다.(중략)