• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.14-24
• /
• 2018

Several typical hyper-elastic constitutive models that encompass both conventional and advanced ones were investigated for the application of instability problems, including the biaxial tension of a rubber patch and inflation of spherical or cylindrical balloons. The material models included the neo-Hookean model, Mooney-Rivlin model, Gent model, Arruda-Boyce model, Fung model, and Pucci-Saccomandi model. Analyses can be done using membrane equations with particular strain energy density functions. Among the typical strain energy density functions, Kearsley's bifurcation for the Treloar's patch occurs only with the Mooney-Rivlin model. The inflation equation is so generalized that a spherical balloon and tube balloons can be taken into account. From the analyses, the critical material parameters and limit points were identified for material models in terms of the non-dimensional pressure and inflation volume ratio. The bifurcation was then identified and found for each material model of a balloon. When the finite element method was used for the structural instability problems of rubber-like materials, some careful treatments required could be suggested. Overall, care must be taken not only with the analysis technique, but also in selecting constitutive models, particularly the instabilities.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.04a
• /
• pp.340-345
• /
• 2010

국내의 건축물은 강한 내력을 갖기 위해 사용되는 HSC빈도가 점진적 증가하고 있으며, HSC로 시공되어진 건축구조물에서의 화재 발생시 폭렬현상의 문제점이 대두되고 있다. 이에 국내외에서 폭렬현상에 대한 연구들이 진행되었고, 이를 통해 폭렬현상에 원인을 알게 되어 이를 토대로 폭렬 방지 방안을 세웠다. 이에 따라 폭렬현상의 원인 중 합수율이 있으며, 이는 콘크리트가 함유하고 있는 수분으로 고온시에 팽창하여 폭렬현상의 매커니즘이 형성된다. 또한 이러한 함수율이 폭렬 발생에 미치는 영향을 크게 하는 요인으로 탄산화와 양생방법이 있다. 우선 탄산화는 반응을 일으킬 경우, 생성물이 공극을 채워 고온시 팽창된 수분이 외부로 나가는 것을 방해하여 수증기압을 축적시키고, 양생방법에 따라 함수율이 달라지게 되어 고온시 팽창될 수분의 양을 결정하게 된다. 특히, 함수율에 의해 발생되는 폭렬을 방지하기 위해 고강도 콘크리트 내부의 수분을 제거하는 강제건조를 하거나 팽창된 수분이 빠져나갈 곳을 만들기 위해 고온에서 녹는 PP섬유를 사용해 공극을 만들어주는 방법이 있다. 따라서 본 연구는 HSC의 폭렬현상방지 대책을 위한 기초자료를 제시하고자 한다.

• Magazine of the Korea Concrete Institute
• /
• v.21 no.1
• /
• pp.61-67
• /
• 2009

본 연구에서는 초고강도 콘크리트의 자기수축 제어대책으로서 팽창재를 이용하는 경우의 적절한 첨가량 및 유효성에 대하여 확인하였고, 재팽창 현상에 대해서 검토하였다. 그 결과 물시벤트비가 극히 낮은 초고강도 콘크리트의 특성상 과첨가의 경우는 미반응의 팽창재가 잔존하고 재팽창 할 가능성이 있는 것으로 나타났으며 초고강도 콘크리트용의 팽창재로서는 가능한 미수화 팽창재가 잔존하지 않는 팽창재 즉 팽창성능을 충분히 가지면서 수화반응이 빠른 조강성의 비표면적이 큰 팽창재가 바람직한 것을 제안하고 있다.

• Applied Chemistry for Engineering
• /
• v.23 no.2
• /
• pp.143-147
• /
• 2012

Since the expansion of perlite occurs in a few second in high temperature, it is difficult to identify an expansion phenomenon through experiments. In order to explain this phenomenon, a numerical study has been carried out by setting a model that water vapour diffuses to a tiny bubble existing in perlite melts and then makes the bubble grow and perlite expand. When the bubble grew and the perlite expanded due to the diffusion of water vapour, the dynamic temperature of perlite decreased. Meanwhile, the dynamic pressure of bubble increased at the beginning as water vapour diffuses in melts, but rather decreased after a rapid expansion of bubble.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.2
• /
• pp.98-104
• /
• 2020

A method to reduce the Contraction and Expansion (CE) noise occurred in an air conditioner is investigated. The noise is measured during the cooling and heating phases in a temperature and humidity chamber to identify the generating phenomenon of CE noise of the air conditioner and the decomposition method is used to estimate its occurrence location. The CE noise of an air conditioner is known to be caused by a stick-slip phenomenon generated by joints of parts connected to the lower decor. Thus a friction experiment was conducted to investigate noise inducing factors. Also, this study established evaluation criteria to effectively analyze the results from friction experiments. Experimental results indicate that increasing surface roughness on both sides of joints is effective. Accordingly, the effect of increased surface roughness on joints of upper and lower decor of air conditioners is evaluated to see its feasibility in a temperature and humidity chamber.

• Composites Research
• /
• v.28 no.6
• /
• pp.340-347
• /
• 2015

As resin impregnates through the fiber preform in vacuum assisted resin transfer molding process, the volume of fibers is changed by expansion of fiber mat according to filling time. It causes not only the change in dimension but also the decrease of mechanical properties of the composite product. Moreover, it results in the economic loss by increase of the used amount of resin especially in the large product such as wind turbine blade. In this study, the ways to control fiber volume fraction were investigated by both the experimental and theoretical analyses on the expansion of fiber preform as the preform was impregnated by resin in the VARTM process. Two kinds of swelling stage were observed as flow front progressed, which was analyzed by comparing the experimental and simulation results. The process parameters are expected to be optimized by investigating the swelling behavior of fiber preform in the manufacturing process of the composite product.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.4
• /
• pp.389-396
• /
• 2022

This paper aims to identify the causes and mechanisms of contraction-expansion noise in refrigerators and proposes noise reduction methods. Contraction-expansion noise generated in refrigerators is mainly due to stick-slip phenomenon occurring on the contact surface between inner parts. Friction experiments were conducted to identify the factors causing the stick-slip phenomenon. Furthermore, the vibration level of the internal components was measured to determine the characteristics and location of the contraction-expansion noise. Based on the experimental results, experiments have been conducted to verify the noise characteristics for each factor. From this, it was confirmed that the friction experiment and the refrigerator contraction-expansion noise generation location and frequency were the same. The vibration level also increased as the vertical force was increased due to load loading. Also, it was confirmed that the contraction-expansion noise was reduced when the surface roughness was increased. Therefore, it was concluded that increasing the surface roughness of the contact surface in the same way as the results of the friction experiment was the method of reducing contraction-expansion noise.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.4 no.2 s.13
• /
• pp.53-59
• /
• 2004

The mechanism of manhole bursting which occurs at excess rainfall events Is studied by using both the physical model and the numerical model (SWMM ; Storm Water Management Model). The result of numerical simulation to steep pressure rising agrees well with that of the physical model at the sewer system under surcharged flow. A cause of manhole bursting is an expansion and spout of the condensed all at manhole that results from the surcharged flow and press wave propagation caused by gate operation or closure of conduit at pumping station.

• The Korean Journal of Rheology
• /
• v.4 no.1
• /
• pp.70-81
• /
• 1992

비교적 묽은 섬유현탁액의 압출팽창 유동을 수치모사하기 위하여 유동장과 섬유배 향 사이의 상호작용을 고려하고 연속체이론에 기초한 유변방정식을 사용하였다. 또한 섬유 배향분포를 얻기 위하여 배향텐서로 표시된 섬유배향방정식을 사용하였는데 이때 섬유간 상 호작용의 효과를 고려해 주기 위하여 현상학적 확산항을 추가하였다. 실험결과와 비교가 용 이한 원통관을 통과하는 섬유현탁액의 압출팽창 유동을 수치모사한 결과 관 입구에서 섬유 가 유선방향으로 정렬되어 유입될 때 현탁강도가 증가함에 따라 팽창비는 감소함을 알수 있 었다. 하지만 관 길이가 짧고 또한 관 입구에서 섬유가 임의 배향상태로 유입될 경우에는 반대로 팽창비가 증가함을 보였다. 관 입구에서의 다른 배향상태에 의해 발생하는 팽창비의 서로다른 경향은 외부 표면부분과 내부중심부분의 신장점도의 차이로 설명할 수 있었다.

• The Korean Journal of Applied Statistics
• /
• v.24 no.3
• /
• pp.485-494
• /
• 2011

When the observations can take only the non-negative integer values, it is called the count data such as the numbers of car accidents, earthquakes, or insurance coverage. In general, the Poisson regression model has been used to model these count data; however, this model has a weakness in that it is restricted by the equality of the mean and the variance. On the other hand, the count data often tend to be too dispersed to allow the use of the Poisson model in practice because the variance of data is significantly larger than its mean due to heterogeneity within groups. When overdispersion is not taken into account, it is expected that the resulting parameter estimates or standard errors will be inefficient. Since coverage is the main issue for insurance, some accidents may not be covered by insurance, and the number covered by insurance may be zero. This paper considers the zero-inflated model for the count data including many zeros. The performance of this model has been investigated by using of real data with overdispersion and many zeros. The results indicate that the Zero-Inflated Negative Binomial Regression Model performs the best for model evaluation.