• Journal of Gifted/Talented Education
• /
• v.12 no.4
• /
• pp.72-107
• /
• 2002

In order to satisfy the gifted students' learning desire and maximize the effectiveness of their learning, we constructed the system which would provide them with supplementary activities based on the Internet boards. At the very beginning, we investigated the personalities of the gifted and their classroom environment which they prefer through studying the related references and asking questionnaires. And then we discussed how to improve the lectures, decided to make the basic structures of the web-based supporting system, and designed some teaching strategies for the gifted. which are named 'GIFTED'. Now the web-based supporting system, which are composed of several boards, was established and is being operated now. Each subject has its own boards. The boards of each subject basically consist of Notice, Learning-materials, Q&A, Homework, Recommended Sites. The results we've got from operating our system are following: Teachers and students were generally satisfied with the system while students wanted more materials. Students and teachers had a positive attitude that the site boards of Learning-materials and Homework are being actively used, while the numbers of contents uploaded in Q&A and Recommended site boards are small and they are regarded as being unimportant to the students and teachers.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.12
• /
• pp.71-82
• /
• 2018

This study presents a reasonable and economical DCM reinforcement length for the various factors (the embankment height, the distance from the embankment to the underground structure, the depth of the soft ground, and the compression index and the swelling index of the soft ground) that affect the stability of the structure due to lateral movement. Based on these results, we analyzed each factor's degree of influence and figured out which factor influenced the lateral movement most. The cross section of the embankment on the soft ground was modeled by using the Finite Element Program and reinforced with DCM. The results show that the increase rate of the reinforcement length with the increase of the embankment height is about 9~50%, the increase rate of the reinforcement length with the depth of soft ground is about 13~30%, and the increase rate of the reinforcement length with increasing compression index is about 3~25%. In addition, the influence of each factor on each other was analyzed. As a result, among the separation distance, the compressive index and the maximum to minimum slope ratio of the reinforcement length of the embankment height, the separation distance was the largest for the depth of soft ground. As the depth of the soft ground increases, the ratio of the maximum to minimum slope of the reinforcement length according to the embankment height is 3.75, the ratio of the maximum to minimum slope of the reinforcement length according to the spacing distance is 4.3, and the ratio of maximum to minimum slope according to compression index is 2.5. From these results, it is confirmed that the three factors are greatly affected by the depth of soft ground.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.390-390
• /
• 2020

자연재해 중 홍수의 경우 단기간에 발생하며, 큰 인명 및 금전적 피해를 가져오는 재해이다. 1970년~2017년 국내 홍수 피해 분석결과 사상자(총 8,152명)는 점차 줄어드는 추세를 보이지만, 반대로 피해액(총 17조5,000억원)은 증가하는 것으로 나타났다(wamis, 국가수자원관리종합정보시스템). 이러한 국내 홍수 피해를 최소화하기 위해서는 각 유역 또는 지역별 특성을 고려한 홍수 취약성 평가가 필요하다. 홍수 취약성은 대상 지역의 기상, 지형, 인문학적 상황에 따라 상이하게 나타나며, 홍수 취약성을 평가하는 인자의 선정 또한 매우 중요하다. 따라서 본 연구에서는 홍수 피해 자료와 홍수 인자간의 인과관계를 분석하여 홍수 취약성 지표 선정 및 취약성 평가를 실시하였다. 홍수 취약성 평가를 위해 홍수 피해 자료와 대상 인자간의 상관성 분석을 통해 상관계수 값이 상대적으로 높게 나온 인자를 선정하였다. 대상 인자는 크게 기상학적 인자, 지형학적 인자, 사회·인문학적 인자로 구분하였다 선정된 인자 간 서로 높은 상관성을 보일 시 공선성이 존재함을 의미하며, 이러한 공선성을 방지하기 위해 VIF (Variance Inflation Factor, 분산팽창계수)를 통한 공선성 검토를 적용하였다. 또한 각 인자 간 에는 서로 다른 단위 및 범위를 가진다. 이러한 경우 특정 인자들의 증감을 취약성 평가에 반영하기에 어려움이 있으며, 유역별 평가 시 신뢰성이 낮아진다. 따라서 Re-scaling 방법을 통해 각 인자의 단위 및 범위를 표준화 후 동일가중치 법을 적용하였다. 본 연구에서는 전체 유역 중 홍수피해가 가장 크게 발생하는 낙동강 태화강 유역을 연구 대상 지역으로 선정하였다. 태화강은 도심지의 중심부를 흐르는 하천이며, 산지의 고도가 높은 지형적 특성을 가지고 있어 홍수에 대한 취약성이 높은 것으로 나타났다(wamis, 국가수자원관리종합정보시스템). 태화강 유역 홍수 취약성 평가결과 유역별 기상, 지형, 인문학적 특성에 따라 홍수 취약성이 높게 나타나는 결과를 보였다. 이와 같은 결과는 유역 내 도심지 비율, 인구밀도, 토지피복 특성에 의한 것으로 주로 지형학적 인자로 인해 취약성이 높게 나타났다. 본 연구에서 활용한 홍수 취약성 평가 방법은 향후 홍수피해 대책 수립에 사용될 수 있을 것으로 판단된다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.516-526
• /
• 2004

Polymerization shrinkage of photoinitiation type composite resin cause several clinical problems. The purpose of this study was to evaluate the shrinkage strain stress, linear polymerization shrinkage, compressive strength and microhardness of recently developed composite resins. The composite resins were divided into four groups according to the contents of matrix and filler type. Group I : $Denfil^{TM}$(Vericom, Korea) with conventional matrix, Group II : $Charmfil^{(R)}$(Dentkist, Korea) with microfiller and nanofller mixture, Group III : $Filtek^{TM}$ Z250(3M-ESPE, USA) TEGDMA replaced by UDMA and Bis-EMA(6) in the matrix, and Group IV : $Filtek^{TM}$ Supreme(3M-ESPE, USA) using pure nanofiller. Preparation of acrylic molds were followed by filling and curing with light gun. Strain gauges were attached to each sample and the leads were connected to a strainmeter. With strainmeter shrinkage strain stress and linear polymerization shrinkage was measured for 10 minutes. The data detected at 1 minute and 10 minutes were analysed statistically with ONE-way ANOVA test. To evaluate the mechanical properties of tested materials, compressive hardness test and microhardness test were also rendered. The results can be summarized as follows : 1. Filling materials in acrylic molds showed initial temporary expansion in the early phase of polymerization. This was followed by contraction with the rapid increase in strain stress during the first 1 minute and gradually decreased during post-gel shrinkage phase. After 1 minute, there's no statistical differences of strain stress between groups. The highest strain stress was found in group IV and followed by group III, I, II at 10 minutes-measurement(p>.05). In regression analysis of strain stress, group III showed minimal inclination and followed by group II, I, IV during 1 minute. 2. In linear polymerization shrinkage test, the composite resins in every group showed initial increase of shrinkage velocity during the first 1 minute, followed by gradually decrease of shrinkage velocity. After 1 minute, group IV and group III showed statistical difference(p<.05). After 10 minutes, there were statistical differences between group IV and group I, III(p<.05) and between group II and group III(p<.05). In regression analysis of linear polymerization shrinkage, group II showed minimal inclination and followed by group IV, III, I during 1 minute. 3. In compressive strength test, group III showed the highest strength and followed by group II, IV, I. There were statistical differences between group III and group IV, I(p<.05). 4. In microhardness test, upper surfaces showed higher value than lower surfaces in every group(p<.05).

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.3
• /
• pp.57-65
• /
• 2015

Electronic packages consist of various materials, and as temperature changes, warpage occurs because of the difference in coefficient of thermal expansion. Shadow $moir{\acute{e}}$ is non-contact, whole field measurement technique for out-of-plane displacement. However, the technique has low sensitivity above $50{\mu}m/fringe$, it is not adequate for the warpage measurement in some circumstance. In this paper, by applying phase shifting process to the traditional shadow $moir{\acute{e}}$, measurement system having enhanced sensitivity of $12.5{\mu}m/fringe$ is constructed. Considering Talbot effect, the measurement is carried out in the half Talbot area. Shadow fringe pattern having four times enhanced sensitivity is obtained by the image process with four shadow fringes. The measurement technique is applied to the fibered package substrate and coreless package substrate for measuring warpages at room temperature and at about $100^{\circ}C$.

• Journal of Digital Convergence
• /
• v.14 no.10
• /
• pp.61-69
• /
• 2016

Recently, university education is changing from content- centered to learner - centered education not to deliver knowledge unilaterally but to help student to cultivate their skills to discover and apply knowledge for themselves. It means that students' cognitive or emotional development is being emphasized. Also, because of universities' quantitative expansion, more strict evaluation on professors' research result, or conversion to a departmental system in a university organization, it has become a crucial issue for undergraduates to adapt to college life successfully. Along with this trend of university education, an academic advising system is becoming one of the most important areas in it as in not only provides students with necessary academic information but also helps them adapt to college life by developing their potentials and integrating their career and life plans. Therefore this study is going to examine the status of academic advising systems in US universities, investigate how Dongguk University's Paramita college operates its academic advising system, and find out way to establish academic advising system in Korean universities.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.12
• /
• pp.43-51
• /
• 2014

Organic matter in dredged soil has a lot of engineering problem in ground including a large settlement, crack propagation, low bearing capacity and low friction angle. From an agricultural point of view, however, organic matter contributes greatly soil quality and plant health. This paper investigated the relationship between engineering and germination characteristics of stabilized mixture consisting of different ratios of organic content (0 %, 10 %, 20 %, 30 %) for recycling dredged soil including organic matter. Several series of laboratory tests such as flow test, unconfined compressive test and consolidation test were performed to find out engineering characteristics. pH, percent of germination and growth of plants were also measured to investigate the germination characteristics. The experimental results indicated that, as organic content increased, unconfined compressive stress decreased and compression and swelling indices increased. However, percent of germination and plant growth increases as organic content increases.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.6
• /
• pp.292-298
• /
• 2002

Densified cordierite matrixes added alumina platelets were studied as a ceramic substrate material having a low thermal expansion coefficient, low dielectric constant and proper strength. Amorphous-type cordierite powders were filled with four kinds of alumina platelet powders in various compositions. All samples were sintered at $1300^{\circ}C$ for 2 h in an air atmosphere. Improved flexural strength of about 80 MPa, low dielectric constant of 5.0 at 1 MHz and low thermal expansion coefficient of $3.5 \times 10^{-6}/^{\circ}C$ were obtained by the control of the microstructure. Isolated micropores were formed in the matrix and the porosity was dependent on the platelet content and size. In the 10 vol% of alumina platelet content, the isolated micropores were 3~8 $\mu \textrm{m}$ in size, and an increase in dielectric constant by adding alumina platelet filler was inhibited by the micropores.

• Composites Research
• /
• v.27 no.4
• /
• pp.174-181
• /
• 2014

This study describes viscoelasticity analysis of carbon-fiber reinforced polymer matrix composite material. One of the most important problem during high temperature molding process is residual stress. Residual stress can cause warpage and cracks which can lead to serious defects of the final product. For the difference in thermal expansion coefficient and change of resin property during curing, it is difficult to predict the final deformed shape of carbon-fiber reinforced polymer matrix composite. The consideration of chemical shrinkage can reduce the prediction errors. For this reason, this study includes the viscoelasticity and chemical shrinkage effects in FE analysis by creating subroutines in ABAQUS. Analysis results are compared with other researches to verify the validity of the subroutine developed, and several stacking sequences are introduced to compare tested results.

• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.23-32
• /
• 2016

This study evaluates landslide susceptibility using statistical analysis by SVM (support vector machine) and the illite index of clay minerals extracted from ASTER(advanced spaceborne thermal emission and reflection radiometer) imagery which can be use to create mineralogical mapping. Landslide locations in the study area were identified from aerial photographs and field surveys. A GIS spatial database was compiled containing topographic maps (slope, aspect, curvature, distance to stream, and distance to road), maps of soil properties (thickness, material, topography, and drainage), maps of timber properties (diameter, age, and density), and an ASTER satellite imagery (illite index). The landslide susceptibility map was constructed through factor correlation using SVM to analyze the spatial database. Comparison of area under the curve values showed that using the illite index model provided landslide susceptibility maps that were 76.46% accurate, which compared favorably with 74.09% accuracy achieved without them.