• Title/Summary/Keyword: 팽윤도

Search Result 697, Processing Time 0.029 seconds

용매 및 가교도에 따른 수소동위원소 교환반응용 촉매 담체의 물성 변화

  • 강희석;이한수;정흥석;안도희;백승우;이성호;김광락
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1996.11a
    • /
    • pp.151-156
    • /
    • 1996
  • 수소동위원소 교환반응에 이용되는 스티렌-디비닐벤젠 고분자 촉매 담체를 제조하였다. 중합반응시 일정한 용매계에서 용매/모노머 함량비와 팽윤제/침전제 함량비를 변화시켜 담체의 표면특성에 미치는 영향을 확인하였다. 가교도가 33%일 경우 용매/모노머가 2.0 이하에서 팽윤제/침전제의 함량비가 증가할수록 10~30$\AA$의 반경을 갖는 기공의 분포가 증가하였다. 담체의 열적안정성을 확인하기 위한 열 중량 분석에서는 온도를 일정한 비율로 단시간에 증가시킬 경우에는 담체의 가교도에 관계없이 35$0^{\circ}C$ 근처에서 거의 유사한 degradation을 보였지만 온도를 매우 천천히 증가시켜 장시간 노출시킬 경우 가교도에 따라서 degradation의 정도와 경향이 다르게 나타남을 확인하였다.

  • PDF

Diffusion Coefficients of Polyimide/N-Methyl-2-Pyrrolidone Systems below Glass Transition Temperature (유리전이온도이하에서의 Polyimide/N-Methyl-2-Pyrrolidone계의 확산계수)

  • 박광승;김덕준
    • Polymer(Korea)
    • /
    • v.24 no.2
    • /
    • pp.194-200
    • /
    • 2000
  • The diffusion coefficients in polyimide/N-methyl-2-pyrrolidone (NMP) systems were proposed using tile Vrentas-Duda's hole free volume theory. Several free volume parameters included in the diffusion coefficients were obtained from the fundamental physical properties of polyimide and NMP and group contribution theory, and the pre-exponential diffusion coefficient, D$_{0}$ was also determined from the dynamic swelling behavior of polyimide in NMP solution. The experimental swelling behavior of polyimide films in NMP was well described by the theoretical one using the proposed diffusion coefficient.t.

  • PDF

Strength Properties of Epoxy-Modified Mortars with Expansive and Swelling Agents (팽창재 및 팽윤재를 병용한 에폭시수지 혼입 시멘트 모르타르의 강도특성)

  • Ham, Seong-Min;Kim, Joo-Young;Kim, Wan-Ki
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2014.05a
    • /
    • pp.288-289
    • /
    • 2014
  • The purpose of this research is to examine strength properties of epoxy-modified mortar with expansive and swelling agent contents. The polymer-modified mortars (PMMs) using epoxy resin are prepared with various polymer-binder ratios, expansive and swelling agent contents. The PMMs using epoxy resin are tested for compressive, flexural and tensile strengths. As a result, the strength properties of the PMMs using epoxy resin are depending on the polymer-binder ratio rather than expansive and swelling agent content, and are remarkably improved over unmodified mortar (UMM).

  • PDF

유동성 조절제가 고농도 도공액의 유동특성에 미치는 영향

  • Lee, Y.K.;Yoo, S.J.
    • Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
    • /
    • 2008.10a
    • /
    • pp.107-122
    • /
    • 2008
  • 종이의 도공액이 고농도화 됨에 따라 도공액의 유동학적 특성에 대한 연구가 더욱 더 중요시 되고 있다. 기존의 합성 증점제의 경우는 단순히 증점 보수제의 기능을 가지고 있으므로 고농도/고속 도공시 블레이드하에서 점탄성적인 성질 중 팽윤에 의한 탄성의 성질이 더 강하게 남아있게 되어 다양한 도공 트러블의 원인이 될 수 있다. 최근에는 이러한 단점을 개선하기 위한 표면 흡착형 유동성 조절제가 소개되고 있다. 따라서 본 연구에서는 알카리 팽윤형 합성 증점제와 표면 흡착형 유동성 개량제로 업계에 알려진 2종의 유동성 조절제가 고농도 도공액의 점탄성적인 유동특성에 미치는 영향성을 검토하였고, PDA(Penetration Dynamic Analyzer) 모듈을 이용하여 원지에 흡수되는 흡수 거동을 관찰하였다.

  • PDF

Thermal Conductive Characteristics and Basic Properties of Bentonite Grouts for the Ground Heat Exchanger of Geo-source Heat Pump (지열히트펌프 지중열교환기용 벤토나이트계 그라우트재의 열전도특성 및 기본성능)

  • Bai, Kang
    • Journal of the Korean Solar Energy Society
    • /
    • v.33 no.1
    • /
    • pp.66-72
    • /
    • 2013
  • In this study, the thermal conductive characteristics and basic properties of the nine commercial products of bentonite grouts were studied. Six of the nine products for ground heat exchanger systems are imported and others for civil engineering are domestic. The thermal conductivities of all bentonite products are nearly similar among products. The free swell indexes, viscosities and filter losses of the ground heat exchanger grouts are lower than those of the civil engineering ones. These characteristics seem to increase of the fluidity to fill the bentonite slurry to bore-hall perfectly, rather than to prevent underground water penetration. Thus, the mixtures of bentonites and sands are recommended for high thermal conduction grouts.